Interior work at M G University - Law College campus - Room No. 211 201 204

Amount

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeterchannel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishingto a flush finish of tapered and square edges of the board with recommended jointing compound, jointingtapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

Table- Supply and installation of table made with 16mm Marine Plywood ( IS710 BWP Grade ) and doubleside lamination 0.08mm Green. All are the accessories with Sleek/ Ebco. Size:2100mm X 600mm X 750mm

Table- Supply and installation of table made with 16mm Marine Plywood ( IS710 BWP Grade ) and doubleside lamination 0.08mm Green. All are the accessories with Sleek/Ebco. Size:900mm X 600mm X 750mm

Conference Table - Supply and installation of table made with 16mm Marine Plywood (IS710 BWP Grade) and double side lamination 0.08mm Green. All are the accessories with Sleek/Ebco size : 11400mm X 600mm X 750mm.

Column Paneling - Providing , fixing and finishing column paneling in Ply Wood section and covered with 8mm Marine plywood (IS710 BWP Grade.) Outer surface is covered with 1mm laminate sheets as per instruction

Storage Unit - Supply and installation of storage Carcass made with 16mm Marine Plywood (IS710 BWP Grade ) and laminated finish 0.08mm Green . All are the accessories with Sleek/Ebco size :( 1800mm X 400mm X 210mm )

Photostat Stand Unit - Supply and installation of stand Carcass made with 16mm Marine plywood (IS710 BWP Grade ) and laminate finish, 0.08mm Green Size : (800mm X 600mm X 750mm )

Window & Door side Paneling - Providing, fixing and finishing paneling in Ply wood section and covered with 8mm Marine plywood (IS710 BWP Grade.). Outer surface is covered with 1mm laminated sheets as per instruction.

Stage - Providing & Fixing Stage 2700mm X 200mm X 1850mm made with 16mm Marine plywood (IS710 BWP Grade) with necessary hardware.

Supplying and providing Zet blinds using imported 100% polymer fabrics, including 38mm aluminium rod and powder coated bottom rail, imported joint less operating chain and with international standard fittings including fixing and all otter charges

Wall painting with plastic emulsion paint of approved brand and manufactureto give an even shade:One or more coats on old work

Blocking for windows - Providing and fixing window blocking made with calcium silicate board.

NADIRSHA BASHEER

Shaji.V

Ashly Furnishing Co Pvt Ltd