REPAIR AND REPLACEMENT OF INTERNAL WIRING WITH MODULAR ACCESSORIES, LIGHT FITTINGS, DBs, MCBs, SUBMAIN WIRING AND MAINT OF CONNECTED WORKS FOR ZONE C AND D AND STREET LIGHTS FITTINGS, HIGH MAST LIGHTS, FLOOD LIGHTS, CONTROL PANELS, POLES AT BKP

Amount

PART-I Taking down carefully copper/aluminium point wiring (light, fan, bell, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, holders, regulators, sockets, light fittings and including making good the disturbed surfaces to match with the existing surfaces by applying white/ colour wash/distemper over applying of putty for smooth finish surface complete all as specified and directed.

M&L for point wiring complete with 1.5 sqmm PVC insulated, FR-LSH type, ISI marked, conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top, bottom, side/back wall knockout for conduit entry from any direction made out of 1.60mm thick and 50mm depth suitable for fixing of modular top cover , blanking plate as per numbers of switch modules, modular switches, sockets, fan regulators, red colour indicator, blank plates etc as approved coloures modular accessories of suitable modules and including 1.5 Sqmm PVC insulated multistranded FR-LSH type unsheathed single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surfaces by applying white/colour wash/distemper as applicable after applying of putty for smooth finish surface complete all as specified and directed for the following:- (Note:- (i) All necessary accessories such as modular box, top cover plate, blank plate, MS box, screws, washers etc are to be used of same make/brand only in relevant items. (ii) Cutting & chasing of wall for point wiring at any height shall be done and cost of the same deemed to be including with quoted rate.)

One light point controlled by one switch .

One fan point controlled by one switch and one regulator.

One exhaust fan point controlled by one switch .

One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

One bell/buzzer point controlled by one bell push.

One light point controlled by two Nos two way switches .

Ditto- all as per Item No.2.00 here-in-before but point wiring with 2.5sqmm PVC insulated multistranded flexible unsheathed copper conductor FR-LSH and earth conductor of size 2.50 sqmm complete all as specified and directed for the following :-

One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on independent board.

One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on same board.

Ditto -all as per Item No.2.00 here-in-before but point wiring with 4sqmm PVC insulated multistranded flexible unsheathed copper conductor FR-LSH and earth conductor of size 4 sqmm PVC insulated multistranded flexible copper conductor FR-LSH of 3 pin, 15/16 Amps socket outlet on independent board complete all as specified and directed.

S&F of modular switch 10 Amps, single pole, 1 way, 1 module, 240V, AC, ISI Marked complete all as specified and directed.

S&F of modular switch 10 Amps, 2way, single pole,1 module, 240V, AC, ISI Marked complete all as specified and directed.

S&F of modular switch 16 Amps, single pole, 1 way, 1 module, 240V, AC, ISI Marked complete all as specified and directed.

S&F of modular socket shuttered type 6 Amps, 2/3 pin combined 2 module, 240 V, AC, ISI marked complete all as specified and directed.

S&F of modular socket 6/16 Amps, 6 pin combined shutter socket, 2 module with light indication, 240 V, AC, ISI marked complete all as specified and directed.

S&F of modular bell push, 10Amps, 1 module, single pole, 1 way, 240V, ISI Marked complete all as specified and directed.

S&F of modular fan regulator, electronic, stepped type (01 to 4/5), 100 to 120 Watts, 2 module, 240Volts, AC, ISI marked complete all as specified and directed.

S&F of angle lamp holder, insulated body with back plate for batten fittings with and including LED lamp 10 watts complete all as specified and directed.

S&F of ceiling rose , three terminal, PVC/polycarbonate body, ISI marked complete all as specified and directed.

S&F of modular red colour lighting indication lamp 6 Amps, single pole, 240volts, AC, 50 Hz suitable for 1 module, ISI Marked complete all as specified and directed.

S&F of call bell, AC, 230 Volts single pole, multi music type ISI marked complete all as specified and directed.

M&L for point wiring complete with 1.5 sqmm PVC insulated, FR-LSH type, ISI marked, conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top, bottom, side/back wall knockout for conduit entry from any direction made out of 1.60mm thick and 50mm depth suitable for fixing of top cover , blanking plate as per numbers of switches, sockets, fan regulators, blank plates etc as approved coloures accessories of suitable and including 1.5 Sqmm PVC insulated multistranded FR-LSH type unsheathed single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surfaces by applying white/colour wash/distemper as applicable after applying of putty for smooth finish surface complete all as specified and directed for the following:- (Note:- (i) All necessary accessories such as sunken box, top cover , blank plate, MS box, screws, washers etc are to be used of same make/brand only in relevant items. (ii) Cutting & chasing of wall for point wiring at any height shall be done and cost of the same deemed to be including with quoted rate.)

One light point controlled by one switch .

One fan point controlled by one switch and one regulator.

One exhaust fan point controlled by one switch .

One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

One bell/buzzer point controlled by one bell push.

One light point controlled by two Nos two way switches .

Ditto - all as per Item No.16.00 here-in-before but point wiring with 2.5sqmm PVC insulated multistranded flexible unsheathed copper conductor FR-LSH and earth conductor of size 2.50 sqmm complete all as specified and directed for the following :-

One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on independent board.

One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on same board.

S&F of switch piano flush button single pole, one way, 5/6 amp, 240 volts, AC, ISI marked complete all as specified and directed.

S&F of switch piano, flush type, single pole, two way, 5/6 Amps, 240Volts, AC, ISI marked complete all as specified and directed.

S&F of bell push switch, single pole, one way, flush type, 6 Amps, 240 volts, ISI marked complete all as specified and directed.

S&F of socket out let, flush type, 2 in 1, 3/5 pin, 5/6 Amps, 240 volts, ISI marked, AC as in repair complete all as specified and directed.

S&F of switch socket combination, 6Amps, 5 pin, flush type, 2 in 1, 240 volts, ISI marked complete all as specified and directed.

S&F of switch socket combination, 6/16Amps, 6 pin, flush type, 240 volts, 2 in 1, ISI marked complete all as specified and directed.

S&F of stepped type (0-4/5 step) electronic fan regulator 240 Volts, 100 Watts to 120 watts single pole, ISI marked including connecting, testing complete all as specified and directed.

S&F of decorative box type 20 -22watt LED fittings with and including LED T-8 tube light 20 watt of fire retardant engineering grade complete with all accessories internally pre-wired, connecting up with and including three core sheathed flexible copper conductor cable of required size and including mounted on PVC/Wooden round/square blocks-02 Nos complete all as specified and directed. (Make - Havells Cat No REGALBATTENT8UPTO1 x 22WDSBSWH/Crompton Greaves cat No : DMLN1LT8-16 for fittings and make - Crompton Greaves Cat No LTT8-20 for tubes /Havells Cat No PHOTONULTRAE2.01213T8SSTL20WLED865SPC/Rashmi Cat No. RLTU20TLT8 as approved for LED lamp or equivalent model/Cat No of make as per Appx 'A' as mentioned in PS here-in-after)

S&F of 10 watt LED light fitting mirror type with high out put diffuser 2 feet, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size other fixing accessories complete all as specified and directed.

S&F of recess mounting 2'x2' LED 35/36 Watt light fittings with LED lamp and required driver, slim in class LED ceiling panel with best in class aesthetic white powder coated frame blended seamlessly with ceiling layout modular ceiling grid and also can be suspended with provided kit and necessary electric connection with and including required size three coat sheathed flexible copper conductor cable from looping box to light fitting and testing complete all as specified and directed. (Make: Bajaj Cat No. BCTBLR 36W LED FP CW/Crompton Greaves Cat No.LCTLSNE-36-F0-CDL/ Havells Cat No.PLUTOSURFACE4X1PLS34WLED857S / Philips Cat No. RC 380B LED36S 6500 G4 L60 W60 PSU ODOC or equivalent model/Cat No of make as per Appx 'A' as mentioned in PS here-in-after)

S&F of decorative type surface mounted 1X6 watts LED light fitting with LED lamps including fixing arrangements at any height with nuts, screws and washers and connected to ceiling rose and connecting up with and including three core sheathed flexible copper conductor cable of required size complete all as specified and directed. (Make: Crompton cat No.LCDEP-06-CDL / Havells cat No EDGEPRORDDLR6WLED857S/ Rashmi Cat No. RLSF06LZSQ/RO or equivalent model/Cat No of make as per Appx 'A' as mentioned in PS here-in-after)

S&F of 35/36 watt LED street light fittings IP-65/66 pressure die cast housing LED lamp aluminium compact high power LED street light with heat resistant toughened glass with LED lamp and necessary connection with suitable size copper cable including taking down old unserviceable fittings complete all as specified and directed . (Make : Crompton Greaves Cat No LSTS-36-CDL-M/ Bajaj Cat No BRTFG 36W LED/Philips Cat No. BRP052 LED 036 CW HP SLAF G SI PSU GR or equivalent model/Cat No of make as per Appx 'A' as mentioned in PS here-in-after)

S&F of powder coated sheet metal enclosure with metal type acrylic door, 415 volts, AC, VTPN DB (V-vertical type distribution board) 8 way plus 24 modules, for flush mounting with 200amps copper busbar, 2 neutral/earth bar for ease of installation and MCCB incomer of rating upto 200Amps, FP and MCB SP /TP MCB's as outgoing and complete connecting cable links with top and bottom with IP43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat cable including taking down old unserviceable DB complete all as specified and as directed. (Make: Legrand cat No.5077 32, 8 way / L&T Cat No.DBVTH008GD or equivalent model/Cat No of make as per Appx 'A' as mentioned in PS here-in-after)

S&F of powder coated sheet metal enclosure acrylic door 415 volts AC,TPN distribution board 8 way 8+24 modules suitable for flush mounting with 100amps copper busbar, neutral bar, earth bar and MCB incomer of rating upto 100Amps, MCB TPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat cable including taking down old unserviceable DB complete all as specified and as directed. (Make:- Legrand cat No. 5076 82 8 way /L&T Cat No. DBTPN008GD or equivalent model/Cat No of make as per Appx 'A' as mentioned in PS here-in-after)

S&F of powder coated sheet metal enclosure acrylic door 415 volts AC,TPN distribution board 4 way suitable for flush mounting with 100amps copper busbar, neutral bar, earth bar and MCB incomer of rating upto 100Amps, MCB TPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat cable including taking down old unserviceable DB complete all as specified and as directed. (Make:- Legrand cat No. 5076 80 4 way / L&T Cat No. DBTPN004GD or equivalent model/Cat No of make as per Appx 'A' as mentioned in PS here-in-after)

S&F of powder coated sheet metal enclosure acrylic door 240 volts AC, SPN distribution board 8 way for flush mounting with 200amps copper busbar, neutral bar, earth bar and MCB incomer of rating upto 200Amps, MCB SPN/DP and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface & colour coat cable including taking down old unserviceable DB complete all as specified and directed. (Make: Legrand Cat No. 5076 21 8 way / L&T Cat No.DBSPN008GD or equivalent model/Cat No of make as per Appx 'A' as mentioned in PS here-in-after)

S&F of powder coated sheet metal enclosure acrylic door 240 volts AC, SPN distribution board 4 way for flush mounting with 100 amps copper busbar, neutral bar, earth bar suitable for MCB incomer of rating upto 100 Amps, MCB SPN/DP and MCB SP, 10KA as outgoing and complete connecting cable links with top and bottom removable gland plates with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat cable including taking down old unserviceable DB complete all as specified and as directed. (Make:- Legrand cat No. 5076 20 4 way / L&T Cat No. DBSPN004GD or equivalent model/Cat No of make as per Appx 'A' as mentioned in PS here-in-after)

S&F of flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C' series, 240 Volts after and including taking down of unserviceable one complete all as specified and directed. (Make : Legrand Cat No. 5078 11/Havells Cat No. DHDPUSN020/L&T Cat No. DBMPS220SD or equivalent model/Cat No of make as per Appx 'A' as mentioned in PS here-in-after)

S&F of MCB, SP, 6 Amps to 32 Amps , 'C' series, 240 Volt, 10KA, 50 Hz, ISI marked complete all as specified and directed

S&F of MCB SPN 32 Amps, 10 KA, 'C' series, AC, 240Volts, 50Hz, ISI marked complete all as specified and directed.

S&F of MCB, four pole, 40 to 63Amps, 'C' Series, 415 Volts, 50Hz, ISI marked complete all as specified and directed.

S&F in repairs of MCCB, 100 Amps, 4 pole, 16KA breaking capacity Icu at 415 Volt with thermal magnetic release, 50 Hz complete all as specified and directed. (Make - L&T Cat No. CM91712OOKOOG or equivalent of Legrand Cat No. 4200-55 or equivalent model/Cat No of make as per Appx 'A' as mentioned in PS here-in-after)

M&L for sub main wiring complete with 2 run of 10 sqmm single core copper conductor (ISI marked) cable 1100 volts grade, FR-LSH type, PVC insulated, unsheathed, flexible, multi stranded colour coded cables drawn through and including rigid PVC conduit of required size medium grade (MMS) with all connected accessories such as Bend, Tee, Elbow, Short pieces etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, FR-LSH type as earth continuity conductor connected to common earth dolly and including chease cutting and filling the same with cement mortar and finished with putty and making good the disturbed surfaces to match with existing surface as required for concealed work cable including taking down old unserviceable submain wiring complete all as specified and directed.

M&L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked) cable 1100 volts grade, FR-LSH type, PVC insulated, unsheathed, flexible, multi stranded colour coded cables drawn through and including rigid PVC conduit of required size medium grade (MMS) with all connected accessories such as Bend, Tee, Elbow, Short pieces etc concealed in wall/roofs/floors and including one run of 6 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, FR-LSH type as earth continuity conductor connected to common earth dolly and including chease cutting and filling the same with cement mortar and finished with putty and making good the disturbed surfaces to match with existing surface as required for concealed work cable including taking down old unserviceable submain wiring complete all as specified and directed .

M&L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked) cable 1100 volts grade, FR-LSH type, PVC insulated, unsheathed, flexible, multi stranded colour coded cables drawn through and including rigid PVC conduit of required size medium grade (MMS) with all connected accessories such as Bend, Tee, Elbow, Short pieces etc concealed in wall/roofs/floors and including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, FR-LSH type as earth continuity conductor connected to common earth dolly and including chease cutting and filling the same with cement mortar and finished with putty and making good the disturbed surfaces to match with existing surface as required for concealed work cable including taking down old unserviceable submain wiring complete all as specified and directed . (Note for item No.40.00 to 42.00 : (i)Two runs of cable with one run earth wire and PVC conduit shall be measured as one length. (ii) Extra length of cable required for connection to DBs shall be deemed to be included in the unit rate and shall not be measured separately. (iii) Earth wire shall run inside the conduit. (iv) Suitable color code of wire must be ensured for phase/netural/earth. (iv) All surface cutting/making good for wiring/switch board/junction box/DB etc are included with unit quoted rate.

M&L for earthing with glavanised steel earth plate electrode of size 60cmX60cmX60cm thick buried directly in ground (earth pit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel using GI or steel wire 4mm dia as earthing lead as shown in electrical plate No.3 of SSR Part-I connected to earthing test point all specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC (1:3:6) type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe , 15mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 50mm thick made of RCC (1:1.5:3) type A-1 duly reinforced with 8mm dia TMT bar @150c/c both ways, one lifting handle made out of 10mm dia TMT bar 250 mm long embedded in cover slab and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layer of 15 cm thick including taking down old unserviceable earthing complete all as specified and directed. (Notre: Galvanised iron wire of 4mm dia upto 7.5m long including testing is deemed to be included with quoted rate).

M&L for 40 mm bore GI pipe (medium grade) fixed with wall with maximum span of 4.0 meters suitable for hanging of ceiling fan with and including necessary cutting hole in brick/stone wall and making good the same with PCC (1:2:4) type B-1 as required including taking down old unserviceable pipe complete all as specified and directed.

Supply, fabricated and fixing of street light bracket made out of GI pipe 40mm dia medium grade bent to shape of 1.2 mtr long as directed including clamps made out of 30 mm x 6 mm flat iron for fixing bracket suitable for steel tubular poles including nuts and bolts, washers and other connected items of required size including painting with two coats of aluminium paint over a coat of red oxide primer including taking down old unserviceable bracket complete all as specified and directed.

S&F in repairs of heating element of 6 KW in Industrial Washing machine complete all as specified and directed.

S&F in repairs of Main Drive V-Belt of Industrial Washine machine complete all as specified and directed.

S&F in repairs of Counter Driver V-Belt of Industrial Washine machine complete all as specified and directed.

S&F in repairs of PLC of Industrial Washine machine complete all as specified and directed.

S&F in repairs of Door Limit Switch of Industrial Washine machine complete all as specified and directed

S&F in repairs of Main bearing set with Bush of Industrial Washine machine complete all as specified and directed

S&F in repairs of Counter Bearing set with Bush of Industrial Washine machine complete all as specified and directed

S&F in repairs of Contactor, 18A of Industrial Washine machine complete all as specified and directed

S&F in repairs of Contactor, 32A of Industrial Washine machine complete all as specified and directed

M&L for opening of washing machine, cleaning, checking the serviceability of spare parts and refixing the same with running condition including testing complete all as specified and as directed.

S&F in repairs of V Belt of Hydro Extractor Machine complete all as specified and directed

S&F in repairs of Main bearing set of Hydro Extractor Machine complete all as specified and directed

S&F in repairs of Safety Interlock Switch of Hydro Extractor Machine complete all as specified and directed

M&L for opening of Hydro Extractor Machine, cleaning, checking the serviceability of spare parts and refixing the same with running condition including testing complete all as specified and as directed.

S&F in repairs of Padding Cloth of Flat Work Ironer (Calendar Machine) complete all as specified and directed

S&F in repairs of Emergency switch of Flat Work Ironer (Calendar Machine) complete all as specified and directed

S&F in repairs of Safety Interlock switch of Flat Work Ironer (Calendar Machine) complete all as specified and directed

S&F in repairs of Buffing and Polishing of Chest in Flat Work Ironer (Calendar Machine) complete all as specified and directed

M&L for opening of Flat Work Ironer (Calender Machine) cleaning, checking the serviceability of spare parts and refixing the same with running condition including testing complete all as specified and as directed.

S&F in repairs of Steam Press of Vaccum Ironing Table and Steam Generator complete all as specified and directed

S&F in repairs of Steam Solenoid Valve in Vaccum Ironing Table and Steam Generator complete all as specified and directed

S&F in repairs of Heating Element, 3 KW in Vaccum Ironing Table and Steam Generator complete all as specified and directed

S&F in repairs of Pressure Switch in Vaccum Ironing Table and Steam Generator complete all as specified and directed

S&F in repairs of Pedal Switch in Vaccum Ironing Table and Steam Generator complete all as specified and directed

M & L for opening of Vaccum Ironing Table and Steam Generator, cleaning, checking the serviceability of spare parts and refixing the same with running condition including testing complete all as specified and as directed.

PART-II Taking down unserviceable street lights/wall mounted lights/flood lights/Post top lantrens /Garden lights and decorative out door type lights in any wattage from 6 watts to 400 watts on any type of poles, highmast lights at any height/any places for servicing/overhauling/repair and maintenance and including providing damaged spare parts/burnt out accessories such as wires,surge protector,LED drivers,LED strip,MCBs ,GI brackets,MS clamps,Timer switch,LED neon lamp,slector switches, Hole fastners etc as required for functioning items to be replaced as per site requirement is in under supply only materials and complete all as specified and directed by Engr-in-Charge. (Note:- (i) New spare parts will be measured and paid separately as "Supply Only" items. (ii) Street light repair work should be attended within 24 hrs as directed by Engr-in-Charge .Cost should be included in quoted rate only. (iii) Necessary T&P /tools/Transportation will be arranged by the contractor for technicians and cost should be included in quoted rate only. (iv) Complaints of urgent nature which effects security lighting system to a particular area will be attended round the clock including Sunday and Holiday. (v) The contractor should give mobile number of concern person for attending repair work to JE/Engr -in-Charge. (vi) Labour charge for taking down and fixing of "Supply Only" items are deemed to be included with quoted rates)

Supply only 3.0 core, 1.5 sqmm PVC sheathed, flexible,multistranded copper conductor cable,1100Volts grade complete all as specified and directed.

Supply only PVC conduit pipe,20 mm dia medium grade, ISI marked complete all as specified and directed.

Supply only MCB SP 6 Amps,240Volts,50Hz,10 KA,"C" series ISI marked complete all as specified and directed.

Supply only MCB SPN 40-63 Amps,240Volts,50Hz,10 KA,"C" series ISI marked complete all as specified and directed.

Supply only MCB TPN 40-100 Amps,415Volts,50Hz,10 KA,"C" series ISI marked complete all as specified and directed.

Supply only of street light bracket made out of GI pipe 25mm dia medium grade bent to shape of 1.2 mtr long including painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.

Supply only of street light bracket made out of GI pipe 40mm dia medium grade bent to shape of 1.2 mtr long including painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.

Supply only fabricated flat iron MS clamps 25X5mm & 30 mm x 6 mm as required and including necessary holes,nuts,bolt and washers etc and bending, fabrication, cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat one under coat and one finishing coat of paint and directed

Supply only LED electronic driver of capacity from 20 watts to 36 watts, 240 Volts,50 Hz suitable for wall mounted and post top lantrens as per existing complete all as specified and directed.

Supply only LED electronic driver of capacity from 40 watts to 60 watts, 240 Volts,50 Hz suitable for street lights as per existing complete all as specified and directed.

Supply only LED electronic driver of capacity from 70 watts to 90/100 watts, 240 Volts,50 Hz suitable for street/security lights as per existing complete all as specified and directed.

Supply only LED electronic driver of capacity from 120 watts to 150 watts, 240 Volts,50 Hz complete as per existing complete all as specified and directed.

Supply only LED electronic driver of capacity from 200 watts to 250 watts, 240 Volts,50 Hz complete as per existing complete all as specified and directed.

Supply only LED electronic strip rating 60 watts to 90 watts, 240 Volts,50 Hz suitable for Street lights and security lights as per existing complete all as specified and directed.

Supply only LED electronic strip rating for 100 watts to 150 watts, 240 Volts,50 Hz suitable for street light and flood lights as per existing complete all as specified and directed.

Supply only LED electronic strip rating 200 watts to 250 watts, 240 Volts,50 Hz suitable for flood lights as per existing complete all as specified and directed.

Supply only surge protect device suitable for 60 watts to 250 watts LED light fittings upto 4 -10 KV Surge protector,240Volys,50Hz as per existing complete all as specified and directed.

Supply only Analogue time switch(Daily time switch) with suitable power contactor 32 Amps, 3Phase, 415 volts complete all as specified and directed. (Note for item No. 72.00 to 89.00:- Materials of Serial item No. 72.00 to 89.00 to be incorporated in item No. 71.00 here-in-before)

M&L for re-winding of Highmast 3 Phase motor,3HP,415Volts,50Hz including taking out from existing position and providing same/suitable guage copper wire as existing, proper varnishing,heating and testing including complete overhauling and servicing with necessary accessories replaced such as capacitor,connectors,Nylon fan blades,nuts,bolts and washers etc complete all as specified and directed.

Taking out of existing old unserviceable pole 7.5 to 9.5 metres long of any type from the PCC foundation,couping and including carefully taking down existing ACSR conductor,cables,Street light,Security light fitting, GI brackets, looping box, stay assembly of any type & patten etc,after disconnection of electric supply by using necessary T&P/crane/ any mechanical method will be applied and debris disposal upto distance not exc 100 mtr at defence land complete all as specified and directed.

M&L for steel tubular swaged type poles 9 metrs long,pole weight approximately 154 kgs, pole should be in one piece only and smooth finishing,ISI marked complete with all accessories such as cast iron base plate, finial taper plug,bolts, nuts, screws,washers and drilling of holes for continious GI earth wire as specified type 410 SP-32 including applying two coats of aluminium paint over one coat of red oxide zinc chrome primer and embedded portion shall be painted with two coats of black paint after preparation of surface complete all as specified and directed make as approved

M&L for galvanised cross arms,bracings,supports,clamps, angles etc and back plates fabricated in structural steel sections including nuts, bolts,washers, welding, bending, fabrication, cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat one undre coat and one finishing coat of paint and including taking down old unserviceable cross arms complete all as specified and directed

S&F of three phase cable junction box of size 400 x 300 x 190 water & fire retardent proof out door type of approved ,hinged/screwed type made of SMC plastic single door with incoming and outgoing connector/terminals and comprising of MCB SP 6 Amps,240V,10KA,'C' Series and including galvanised flat iron clamps of size 25X5mm thick -02 Nos GI nuts, bolts & washers etc for fixing on PCC/Steel tubular pole/ wall surface etc and including taking down of old unserviceable junction box complete all as specified and directed.

M&L for PVC conduit heavy duty of size 20 mm dia from looping box to Street light connector, holding in MS clamp of size 25X2 mm thick at every one mtr used in each pole 04 Nos of clamps with necessary nut,bolts and washers etc and including PVC sheathed three core multistranded copper conductor cable of size 1.5 sqmm from looping box to light fitting connector and including taking down of old unserviceable item complete all as specified and directed. (Note:- Pole hight approximate 11Mtr)

M&L for earthing with galvanised steel earth plate electrode of size 60cmX60cmX6mm thick buried directly in ground (earth pit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts, check nuts and washers with 25x4mm galvanised steel strip as earthing lead as shown in electrical plate No.3 of SSR Part-I connected to earthing test point all specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC (1:3:6) type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe , 40mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 50mm thick made of RCC (1:1.5:3) type A-1 duly reinforced with 8mm dia TMT bar @150c/c both ways, one lifting handle made out of 10mm dia TMT bar 250 mm long embedded in cover slab and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layer of 15 cm thick including taking down old unserviceable earthing complete all as specified and directed. (Note: Galvanised steel earth strip of 25x4 mm upto 7.5m long including testing is deemed to be included with quoted rate).

M&L for XLPE insulated, LT armoured electric cable with aluminium stranded conductor 1100 volts grade, cross-sectional area 25 sqmm, 4 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands, nuts, bolts and washers etc and testing including taking down old unserviceable XLPE cable complete all as specified and directed. (NOTE: Excavation/earth work, sand cushioning, cable cover/brick shall be measured and paid separately if required)

M&L for XLPE insulated, LT armoured electric cable with aluminium stranded conductor 1100 volts grade, cross-sectional area 16 sqmm, 4 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands, nuts, bolts and washers etc and testing including taking down old unserviceable XLPE cable complete all as specified and directed. (NOTE: Excavation/earth work, sand cushioning, cable cover/brick shall be measured and paid separately if required)

M&L for XLPE insulated, LT armoured electric cable with aluminium stranded conductor 1100 volts grade, cross-sectional area 10 sqmm, 4 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands, nuts, bolts and washers etc and testing including taking down old unserviceable XLPE cable complete all as specified and directed. (NOTE: Excavation/earth work, sand cushioning, cable cover/brick shall be measured and paid separately if required)

S&F of GI bracket made up with 40 mm dia medium grade GI pipe of 1.5 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on PCC & Steel poles/on wall surfaces and including suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing any place of poles with nuts,bolts & washers including grouting on wall etc and including taking down of old unserviceable bracket complete all as specified and directed.

S&F of LED secruity light fitting of capacity 70-75 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including taking down of old unserviceable light fittings complete all as specified and directed. (Make:-Crompton cat ref No.LSTP-72-CDL/Havells Cat No.ENDURAPEARLPLUSSL70WLED757PASYTOPC/Bajaj Cat No.BRTFG75W LED I or equivalent model/cat No of make as per Appendix 'A' as mentioned in PS here-in-after)

S&F of LED secruity light fitting of capacity 90 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including taking down of old unserviceable light fittings complete all as specified and directed. (Make:- Crompton cat ref No.LSTP-90-CDL/Havells Cat No.ENDURACITYLINERNEROS90WLED757SASYBOTG/Bajaj Cat No.BRTFG90W LED I V2 or equivalent model/cat No. of make as per Appendix 'A' as mentioned in PS here-in- after)

S&F of 9/10 watts LED garden light Integral Decorative LED Bollard with opal acrylic and IP65 protection and providing suitable fixing arrangements such as lugs,glands,nuts,bolts and washers and including taking down old unserviceable light fittings complete all as specified and directed. (Make : Bajaj Cat Part No BGBOS600 9W LED/Crompton Cat No. LBLSR-10-WW or equivalent model/cat No. of make as per Appendix 'A' as mentioned in PS here-in- after)

S&F of 35/40 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffuser and IP65 protection and providing suitable fixing arrangements such as lugs,glands,nuts,bolts and washers and including taking down old unserviceable light fittings complete all as specified and directed.( Make :- Havells Cat Part No RUBYPT35WLED757PSYMTOPC/ Bajaj Model BGCL 40 W LED WH /Crompton Cat No. LPTM-40-CDL or equivalent model/cat No. of make as per Appendix 'A' as mentioned in PS here-in- after)

Boaring holes horizontally under road without damaging the surface of road(minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of dia not exceeding 100 mm dia for passing of UG cable all as specified and as directed.

M&L for PCC (1:4:8) type D2 using (40 mm graded stone aggregate) for making good cutting portion, mass concrete, filling of foundations etc including necessary use and waste of form work complete all as specified and directed

M&L for PCC (1:2:4) type B1 using (20 mm graded stone aggregate) for making good cutting portion coping of pole and filling of foundation etc including necessary form work complete all as specified and directed.(Note:- Top surface of pole coping to making smooth finishing and white washing made by the contractor cost deemed into quoted rete only.)

M&L for sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep including required watering and consolidation after laying and stretching the cable complete all as specified and directed. (Note: Only punned down volume of sand to be measured)

Excavation in trenches for laying under ground cable, foundation and erection of poles and stays in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and directed

Returning, filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm soil all as specified and directed.

Removing surplus excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting points as in soft/loose soil all as specified and directed.

M&L for brick covering with width equal to length of brick as protection to cable with well burnt sub class ‘B’ bricks of size 250mm x 115mm x .75mm laid dry flat complete all as specified and directed .

M&L for steel tubular pole painting of any type /size/length and removing from existing pole painting by using wire brush and using with emary paper and cleaning with chemical agents after cleaning of steel bubular pole and GI brackets and cross arms etc applying one coat of red oxide primer and two coats of silver oil painting upto smooth finishing and painting upto 1.2 mtr at bottom layer by layer 30 cm by 30 cm with yellow and black paint to satisfactorly by engr-in-charge and painting work carryout at any height and incuding marking of pole numbers as directed and safety equipments & tools will be own arrangement and complete all as specified and directed. (Note:- Cost of painting material is deemed to be included in quoted rate).

M&L for PCC pole painting of any type /size/length and removing from existing pole painting by using wire brush and cleaning with with cotton waste after cleaning of PCC pole in two coats water proof cement based paint in two coats and GI brackets and cross arms in two coats of red oxide primar and two coats of silver oil paint upto smooth finishining and painting upto 1.2 mtr at bottom layer by layer 30 cm by 30 cm with yellow and black paint to satisfactorly by engr-in-charge and painting work carryout at any height, including safety eqpts & tools will be own arrangement and complete all as specified and directed

M/S RAJESH TRADING CO

M/S. ARUP KUMAR DEY

M/S. NAYABASTI CONSTRUCTION and SUPPLY SYNDICATE

BEE ROMEN

SENCO

NANDY ENTERPRISE

SWWAPAN BUILDERS

R.S. COMPANY