GMO:- Extension of Running Room at GMO for 40 Nos. Beds (20 Nos. Double Bed Room) under ADEN/1/GMO.

Item Breakup - BI-Any Civil work

0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) 9.147D.4 Three track three panels sliding window with Sqm 54 9642.6 520700.4 fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both 28 having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). DHANBAD DIVISION-ENGINEERING/EAST CENTRAL RLY Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body 9.147F with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.147F.2 Two track four panels sliding door made of Sqm 8.93 6140.9 54838.24 (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 +/- 0.2 29 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto 10.00 sqm). 9.149 Providing and fixing casement handle made of Each 57 188.55 10747.35 zinc alloyed (white powder coated) for uPVC 30 casement window with necessary screws etc. complete. 9.150 Providing and fixing zinc alloyed (white powder Each 61 167.15 10196.15 31 coated) touch lock for uPVC sliding window with necessary screws etc. complete. 9.151 Providing and fixing steel roller for uPVC Each 57 94.9 5409.3 32 sliding window with necessary screws etc. complete. 9.152 Providing and fixing steel roller for uPVC Each 4 155.1 620.4 33 sliding door with necessary screws etc. complete. 10.0 STEEL WORK 10.2 Structural steel work riveted, bolted or welded Kg 500 111.95 55975 in built up sections, trusses and framed work, 34 including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in 10.25 position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, Kg 500 142.3 71150 35 brackets, gates and similar works DHANBAD DIVISION-ENGINEERING/EAST CENTRAL RLY 10.28 Providing and fixing stainless steel ( Grade Kg 250 612.25 153062.5 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary 36 accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 11.0 FLOORING 11.2 Dry brick on edge flooring in required pattern Sqm 75 733.3 54997.5 with bricks of class designation 7.5 on a bed of

local sand, with common burnt clay non modular bricks. Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 11.3 finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone Sqm 436 545 237620 38 aggregate 11.16S TILE FLOORING Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to 11.20 match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 39 11.20.3 Dark shade pigment using ordinary cement Sqm 120 983.95 118074 11.41S VITRIFIED FLOOR TILES Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with 11.41A grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.2 Glazed vitrified floor tiles polished finish of size 40 11.41A.2.2 Size of Tile 600 x 1200 mm Sqm 500 1612.75 806375 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size 41 11.41A.3.1 Size of Tile 600 x 600 mm Sqm 45 1311.05 58997.25 DHANBAD DIVISION-ENGINEERING/EAST CENTRAL RLY Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 11.56 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab colour of Black, Sqm 19.74 3908.8 77159.71 42 Cherry/Ruby Red or equivalent 12.0 ROOFING Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry 12.40 surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately): Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring 12.41 conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 43 12.41.2 110 mm diameter Metre 60 319.75 19185 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 12.42 conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.1 Coupler 44 12.42.1.2 110 mm Each 10 119.95 1199.5 12.42.3 Single tee with door 45 12.42.3.2 110x110x110 mm Each 6 205.45 1232.7 12.42.4 Single tee without door 46 12.42.4.2 110x110x110 mm Each 6 190.75 1144.5 12.42.5 Bend 87.5 degrees 47 12.42.5.2 110 mm bend Each 30 132 3960 12.42.6 Shoe (Plain) 48 12.42.6.2 110 mm Shoe Each 20 115.95 2319 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of 12.43 required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 49 12.43.2 110 mm Each 40 309.5 12380 DHANBAD DIVISION-ENGINEERING/EAST CENTRAL RLY Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every 12.45 junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain Sqm 116.1 1145.95 133044.8 50 board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 12.50 Providing and fixing precoated galvanised iron Sqm 220 671.55 147741 profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 51 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) DHANBAD DIVISION-ENGINEERING/EAST CENTRAL RLY 13.1 12 mm cement plaster of mix : 52 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 1214 282 342348 CEMENT PLASTER WITH A FLOATING COAT OF 13.7S NEAT CEMENT 12 mm cement plaster finished with a floating 13.7 coat of neat cement of mix : 53 13.7.1 1:3 (1 cement: 3 fine sand) Sqm 280 374.15 104762 13.16S 6MM CEMENT PLASTER 13.16 6 mm cement plaster of mix : 54 13.16.1 1:3 (1 cement : 3 fine sand) Sqm 342 253.05 86543.1 13.25 Extra for plastering: 13.26 Providing and applying plaster of paris putty of Sqm 2200 214.3 471460 2 mm thickness over plastered surface to 55 prepare the surface even and smooth complete. Distempering with oil bound washable 13.41 distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and Sqm 2200 162.55 357610 56 including water thinnable priming coat with cement primer 13.44S EXTERIOR FINISHING Finishing walls with Acrylic Smooth exterior 13.46 paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 Sqm 434 166.85 72412.9 57 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Painting with synthetic enamel paint of 13.62 approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under Sqm 200 191.4 38280 58 coat of suitable shade with ordinary paint of approved brand and manufacture 15.0 DISMANTLING AND DEMOLISHING Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 20 2007.1 40142 59 equivalent design mix) 15.3 Demolishing R.C.C. work manually/ by cum 4 2928.1 11712.4 mechanical means including stacking of steel 60 bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Demolishing brick work manually/ by mechanical means including stacking of 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 61 15.7.4 In cement mortar cum 110 1698.45 186829.5 Dismantling doors, windows and clerestory windows (steel or wood) shutter including 15.12 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 62 15.12.1 Of area 3 sq. metres and below Each 8 302.7 2421.6 Dismantling steel work in single sections 15.17 including dismembering and stacking within 50 metres lead in: 63 15.17.2 Channels, angles, tees and flats Kg 250 1.9 475 Dismantling roofing including ridges, hips, 15.28 valleys and gutters etc., and stacking the material within 50 metres lead of: DHANBAD DIVISION-ENGINEERING/EAST CENTRAL RLY 64 15.28.2 Asbestos Cement sheet Sqm 150 63.75 9562.5 15.60 Disposal of building rubbish / malba / similar cum 150 219.35 32902.5 unserviceable, dismantled or waste materials by mechanical means, including loading, 65 transporting, unloading to approved municipal dumping ground or as approved by Engineer- in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 17.0 SANITARY INSTALLATIONS Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.1 manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan Each 3 5781.35 17344.05 66 of size 580x440 mm with integral type foot rests Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush 17.3 bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.2 W.C. pan with ISI marked black solid plastic Each 3 6827.55 20482.65 67 seat and lid Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing 17.4 cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1 One urinal basin with 5 litre white P.V.C. Each 5 5268.85 26344.25 68 automatic flushing cistern 17.7B Providing and fixing wash basin with C.I. Each 8 1404 11232 brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, 69 cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, 17.10 including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 70 17.10.1.2 510x1040 mm bowl depth 225 mm Each 2 6677.4 13354.8 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet Each 6 299.35 1796.1 with flexible tube upto 1 metre long with S.S. 71 triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DHANBAD DIVISION-ENGINEERING/EAST CENTRAL RLY 17.22A Providing and fixing CP Brass 32mm size Each 10 886.25 8862.5 72 Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 17.22B Providing and fixing CP Brass Single lever Each 4 6119.15 24476.6 telephonic wall mixer of quality & make as 73 approved by Engineer in charge. (a) 15 mm nominal dia Providing and fixing white vitreous china wash 17.25 basin including making all connections but excluding the cost of fittings : 74 17.25.1 Flat back wash basin of size 630x450 mm Each 8 1149.6 9196.8 17.31 Providing and fixing 600x450 mm beveled Each 8 1411.15 11289.2 edge mirror of superior glass (of approved 75 quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 17.68 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.68.1 White vitreous china dual purpose WC pan Each 6 10326.65 61959.9 with white solid plastic seat and lid with white 76 vitreous china flushing cistern and C.P. flush bend. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP 17.73 brass screws with concealed fittings arrangement of approved quality and colour. 17.73.2 600 mm long towel rail with total length of 645 Each 12 600.35 7204.2 77 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the 18.11 walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 78 18.11.1 15 mm dia nominal bore Metre 60 485.2 29112 79 18.11.2 20 mm dia nominal bore Metre 140 541.1 75754 Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc.-External work 80 18.12.3 25 mm dia nominal bore Metre 150 417.95 62692.5 81 18.12.6 50 mm dia nominal bore Metre 90 654.2 58878 Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 82 18.13.2 50 to 80 mm nominal bore Each 2 1513.7 3027.4 18.15S BRASS FITTINGS Providing and fixing brass bib cock of approved 18.15 quality : 83 18.15.1 15 mm nominal bore Each 12 303.85 3646.2 Providing and fixing brass stop cock of 18.16 approved quality : 84 18.16.1 15 mm nominal bore Each 12 303.85 3646.2 DHANBAD DIVISION-ENGINEERING/EAST CENTRAL RLY 85 18.16.2 20 mm nominal bore Each 20 327.95 6559 Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 86 18.17.1 25 mm nominal bore Each 5 532.35 2661.75 87 18.17.1A 20 mm nominal bore Each 6 461.75 2770.5 88 18.17.4 50 mm nominal bore Each 6 878.25 5269.5 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone 18.37 aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.37.1 With common burnt clay F.P.S.(non modular) Each 3 9020.8 27062.4 89 bricks of class designation 7.5 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and 18.46 making long screws etc. complete (New work) : 90 18.46.1 15 mm nominal bore Each 10 262.3 2623 91 18.46.2 20 mm nominal bore Each 20 289.05 5781 92 18.46.3 25 mm nominal bore Each 10 369.35 3693.5 93 18.46.6 50 mm nominal bore Each 5 706.7 3533.5 18.48 Providing and placing on terrace (at all floor Litre 4000 9.7 38800 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking 94 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS 18.50 standards and weighing not less than 810 gms. 95 18.50.1 15 mm nominal bore Each 6 715.05 4290.3 Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 96 18.53.1 15mm nominal bore Each 25 500.35 12508.75 18.53A Providing and fixing C.P. Brass extension Each 25 61.7 1542.5 nipple (size 15mmx50mm) of approved make 97 and quality as per direction of Engineer-in- charge. 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing PTMT extension nipple for 18.75 water tank pipe, fittings of approved quality and colour. 18.75.3 25mm nominal bore, weighing not less than 62 Each 6 100.55 603.3 98 gms Providing & fixing chrome plated brass battery 18.84 based infrared sensor operated pillar cock, having foam flow technology. 99 18.84.1 15 mm nominal bore Each 6 8050.5 48303 19.0 DRAINAGE DHANBAD DIVISION-ENGINEERING/EAST CENTRAL RLY 19.1S STONE WARE PIPES AND FITTINGS Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone 19.3 aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 100 19.3.2 150 mm diameter S.W. pipe Metre 90 689.75 62077.5 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm 19.7 nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight 19.7.1 of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.7.1.1 With common burnt clay F.P.S. (non modular) Each 3 11687.1 35061.3 101 bricks of class designation 7.5 Extra for depth beyond 45 cm of brick 19.31 masonry chamber : Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb 19.32 shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) Each 1 28029.15 28029.15 102 bricks of class designation 7.5 22.0 WATER PROOFING 22.14 Grading roof for water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse cum 5 7510.75 37553.75 103 sand : 4 graded stone aggregate 20mm nominal size) 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY DHANBAD DIVISION-ENGINEERING/EAST CENTRAL RLY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, 26.86 modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 104 26.86.3 Frame size 50 x 100 mm Metre 30.3 853 25845.9 105 26.86.5 Frame size 65 x 100 mm Metre 54 1000.15 54008.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N 26.87 (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 106 26.87.1 30 mm thick Sqm 37.91 3954 149896.14 DHANBAD DIVISION-ENGINEERING/EAST CENTRAL RLY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and 26.89 screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 107 26.89.1 18 mm thick Sqm 90 2714.15 244273.5 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) 26.90 having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately) 108 26.90.1 6 mm thick Sqm 120 982 117840 109 26.90.2 12 mm thick Sqm 90 1543.95 138955.5 Total 12591499.77

Item Breakup - CII-Reinforcement