SPECIAL REPAIR TO BLDG NO P-322 AND PROVISION OF ARBORICULTURE AT MD ACCN PH-II 47 MAJ 55 JCO AND 160 OR AT PANGODE MIL STN TRIVANDRUM

Amount

Dismantling of asbestos cement (corrugated, semi-corrugated etc) sheet in roof covering.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self-tapping screws/ J hooks, etc complete all as specified and directed.

S&F 0.56 mm thick plain, aluminium sheeting, alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) etc complete all as specified and directed.

Dismantling of wall and ceiling boards or insulation boards any thickness including cover fillets etc complete all as specified and directed.

M&L for non-asbestos fibre cement building boards decorative type, 4mm thick fixed or laid/ inserted to timber/ GI/ aluminium framework with screws on ceiling etc complete all as specified and directed.

M&L for anodised aluminium snap grid frame work for false ceiling size 605 x 605 mm etc complete all as specified and directed.

S&F plain mild steel wire, 3.15 mm dia galvanised class 3, in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc complete all as specified and directed.

M&L for applying one coat of acrylic exterior emulsion water proofing paint on old surfaces of wall (up to four storey bldg) including preparation of surface, etc complete as per manufactures instructions and all as specified and directed.

M&L for preparing the distempered old surfaces of wall by washing, rubbing down and stopping and applying one coat of oil bound distemper etc complete all as specified and directed.

Demolition of cement concrete (unreinforcement) as in ground floors or paving not exceeding 15cm thick below or above ground level complete.

M&L for 75mm thick cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate as in sub base of floor etc complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes all as specified and as directed.

M&L for chequered cement concrete tiles 400x400x20-25mm thick, coloured, set jointed and pointed in neat cement slurry in floors with grey cement and pigment etc complete all as specified and directed.

Demolition of brick work/stone masonry built in cement mortar and removing the debris/rubbish to a distance not exceeding 100 mtr etc complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with PCC solid block type C1, 1:3:6 (using 20mm graded aggregate), solid blocks exceeding 10 cm in width and setting in CM 1:4 etc complete all as specified and directed..

All as per item 15 here-in-before, but except PCC solid blocks.

Taking down of cement plaster including hacking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster on fair faces of brick work/concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement.

M&L for applying two coats of acrylic exterior emulsion water proofing painting over one coat of primer including preparation of new surfaces of wall complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F mild steel framed brackets of angles or tees with web and flanges cut to shape drilled and counter sunk for screw, including bending and welding angles as necessary gusset plates, riveting etc not exceeding 10 kg each brackets conforming to Fe 290. Gde-E-165 etc complete all as specified and directed.

M&L for cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and directed..

M&L for two coats of synthetic enamel paint over a coat red oxide zinc chrome primer, including preparing new steel surfaces any description, over 10 cm width or girth, not otherwise described.

Taking down existing aluminium doors / windows frames including shutters (Clip, Glass, rubber gasket) up to 4 Sqm each and re-fixing the same opening after carry out the necessary repair all as specified and directed by Engineer-in-Charge.

M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (upto eight storey building) etc complete all as specified and directed.

S&F in repair plastic cabinet mirror (size 600 x 450mm) complete all as specified and directed.

S&F in repairs toilet paper holder brass, fancy type chromium plated screwed down for fixing to walls with screws complete all as specified and directed

S&F in repairs brass, chromium plated shower roses 125 mm size with or without swivel joints including fixing to steel/ PVC pipe or union etc complete all as specified and directed..

S&F in repair brass CP towel ring Round/ Square shape.

S&F aluminium anodised towel rail 20 mm dia, D type 60 cm long fixing between flanges.

S&F in repair brass CP grating doom 125 mm dia with waste hole and making good to floor etc complete all as specified and directed.

S&F in repair health faucet with push button flexible PVC pipe with steel lining of 1 mtr long PVC chromium plated suitable for 15mm pipe.

S&F in repair of vitreous China wash down water closet pan (pedestal pattern), superior quality fancy type white (excluding flushing cistern and flush type), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage etc with seat cover complete.

S&F in repairs of PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle including brackets capacity 10 ltrs and connection to pipe complete.

S&F in repairs corner glass fancy type with stainless steel frame (200 mm x 200 mm) chromium plated screwed down for fixing to walls with screws etc complete all as specified and directed.

S&F in repairs glass shelf of size 300 mm x 150 mm with steel frame fancy type chromium plated screwed down for fixing to walls etc complete all as specified and directed.

S&F in repairs cast copper alloy chromium plated angle cock, fancy type screwed down, high pressure, screwed both ends for 15mm dia PVC/ iron pipe or for unions etc complete all as specified and directed.

S&F in repair brass CP mixer for mixing hot and cold water screwed down for iron pipe 15mm dia.

S&F in repairs vitreous China wash basin, white flat back size 550 mm x 400 mm including brackets with waste pipe including cutting for and pinning in ends of brackets or erecting stand etc complete all as specified and directed.

S&F in repair pillar taps brass chromium plated, fancy type with long screwed shanks and fly nuts screwed for 15mm dia pipe etc complete all as specified and directed.

S&F in repair PVC connection 15mm dia, 450mm long with 02 Nos brass check nuts with washer etc complete all as specified and directed.

S&F in repair bib tap brass, fancy type, chromium plated 15mm dia with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S & F in repairs stop valve 15 mm dia, cast copper alloy, fancy type chromium plated screwed down, high pressure with long shank and cup screwed both ends for unions and fixed, etc complete all as specified and directed.

S&F 15 mm bore UPVC pipes (SCH-80) and fittings to walls, ceiling or in floors etc, including taking down existing pipe, etc complete all as specified and directed.

S&F 20 mm bore UPVC pipes (SCH-80) and fittings to walls, ceiling or in floors etc, including taking down existing pipe, etc complete all as specified and directed.

PROVISION OF ARBORICULTURE M&L for planting of well grown trees (Palm, Gulmohar, Indian laburnum (Golden shower tree, Mango, Neem, etc.) of height 1.20 mtr with proportional girth of ever green and of shady species including excavation, removing, watering, manuering, spiked staples or stays of required height if necessary and including maintaining for 2 years from certified date of completion complete all as specified and directed. Notes: 1. Number of plants / species and exact locations to be planted shall be all as directed by Engineer-in- Charge. 2. During the maintenance period (Two years) the contractor shall be responsible for replacing the damaged plant / grass and caring it at contractor own cost. The rate quoted by the tenderer shall be deemed to be included the same. 3. In addition to Performance security of work, an amount of 5% of total work done of Arboriculture shall be retained from RAR/FB for a period of two years from the certified date of completion as Guarantee for maintaining the plant/ grass work during the Guarantee period by contractor. 4. GE may accept a fixed deposit receipt pledged in favour of GE(Army) Trivandrum from nationalized bank for the amount as mentioned in Note-3 here-in-before for a period of 2 years in lieu of amount retained in FB.

DJ GROUP

M/S Vadakkeparambil Electro-Mechanic Service

SHILPA ENGINEERS AND CONTRACTORS