Const. of Govt. Industrial Training Institute (ITI) in village Basantpur in Distt. Kurukshetra (CM Announcement No. 19884 dated 24.06.2017) (Pdg. 315 KVA Electric Sub Station Only).

Amount

RUBBER MATTING - Rubber mat Providing and fixing of insulated robber matting suitable for 11 KV installation 1 M x 2 M x 12 mm thick (IS code 15652-40091) as per specification complete and as per directions of Engineer-in-charge HSR No. 20.84

MCCB ,DISTRIBUTION BOARDS, MCB's, RCCB's, CHANGE OVER etc. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 600 to 800 amp, 50 KA HSR No. 23.22.1.13

MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB above 250 A and up to 630 A FP HSR No. 23.22.2.3

MS STAND, BUS BAR CHAMBER AND PANELS Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide. HSR No. 23.24.1

SAFETY ITEMS Supply and erection of Medium Voltage caution notice plate of size 200*150 mm in three languages. HSR No. 23.26.1

Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages. HSR No. 23.26.2

Supply and erection of shock restoration chart in glass frame. HSR No. 23.26.3

Supply & Erection of mild steel bucket stand suitable for 6 Nos. fire buckets,(but without bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire Satisfaction engineer in charge of the work (size 6'x4' made of GI pipe 32mm dia). HSR No. 23.26.4

EARTHING AND LIGHTENING ARRESTOR Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. HSR No. 24.1.1

Extra for using salt and char coal/coke for pipe earth electrode as required. HSR No. 24.1.2

Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. HSR No. 24.1.3

Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required. HSR No. 24.1.4

Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. HSR No. 24.1.5

Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required. HSR No. 24.1.6

Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. HSR No. 24.1.7

Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. HSR No. 24.1.9

Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material. HSR No. 24.1.10

Laying of underground cable in pipe /existing open/closed trench etc as required:- 50 Sq mm to 150 sqmm 2 to 4 Core HSR No. 24.2.4.3

185 sqmm to 240 sqmm 3 to 3½ Core HSR No. 24.2.4.4

Supply and erection of suitable compression type brass cable glands for underground Cable :- 70 sqmm to 95 sqmm Cable 3 to 3½ Core HSR No. 24.2.7.4

120 sqmm to 185 sqmm Cable 3 to 3½ Core HSR No. 24.2.7.5

240 sqmm to Cable 3 to 3½ Core HSR No. 24.2.7.6

Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. 95 sqmm HSR No. 24.2.8.9

185 sqmm HSR No. 24.2.8.12

240 sqmm HSR No. 24.2.8.13

Supply and erection of cable route marker made of 50 cm long 10 mm dia M.S. Rod welded/revitted at the top with 10 cm dia 3 mm thick MS plate inscribed with 'cable' word on it, having a cross arm 30 cm long of the same dia welded at the bottom, in exiting trench 45 cm below ground level. HSR No. 24.2.10

HT CABLE Laying and erection of XLPE (E) 11 kv HT aluminium conductor armoured cable 1 metre below ground level with sand & bricks with all labour and material including digging and refilling of trench as required up to 120 sqmm 3 core XLPE Cable HSR No. 24.3.1.1

Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 to 120 sqmm HSR No. 24.3.3.1

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 to 120 sqmm HSR No. 24.3.4.1

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 120/105 mm outer dia/ inner dia HSR No. 24.5.2.5

MS Bucket for fire EL257

G.O. Switch with all accessories PS125

SITC of LT Capacitor Bank Panel 95KVAR capacity having size 650mm x 1900mm x 500mm made out of 14SWG CRCA sheet for load bearing surfaces & 16SWG for non load bearing surfaces with 2nos. 10 KVAR, 1No. 15 KVAR & 3 Nos. 20KVAR capacity Capacitors alongwith control wiring etc. copmplete in all respect upto the entire satisfaction of Engineer-in-charge of work. Incomer side MCCB 250 A 3P =1No. ROH=1No. SPREADER LINKS =1No. APFC RELAY =1No. MCB SP 2/6A =3Nos. Control Terminal =8Nos. 10 KVAR CAPACITOR FEEDER MCB 32 A TP CAP DUTY =2Nos. CONTACTOR CAP.DUTY. 10 KVAR =2Nos. PUSH BOTTEN =4Nos. ON INDICATION =2Nos. AUTO-MANUAL SWITCH =2Nos. 6 Amp Control MCB SP =2Nos. 15 KVAR CAPACITOR FEEDER MCB 32 A TP CAP DUTY =1No. CONTACTOR CAP.DUTY. 15 KVAR =1No. PUSH BOTTEN =2No. ON INDICATION =1No. AUTO-MANUAL SWITCH =2Nos. 6 Amp Control MCB SP =2Nos. 20 KVAR CAPACITOR FEEDER MCB 63 A TP CAP DUTY =3No. CONTACTOR CAP.DUTY. 20 KVAR = 3Nos. PUSH BOTTEN =6Nos. ON INDICATION =3Nos. AUTO-MANUAL SWITCH =3Nos. 6 Amp Control MCB SP =3Nos. BUS BAR (B) Bus Bar will be of Electrolytic COPPER of size:250A ENCLOSURER ( C) CRCA sheet steel enclosure. Panel will be fabricated with 14SWG CRCA sheet steel for load bearing surfaces and 16SWG for non load bearing surfaces. Tentative Dimensions - 650 X 1900 X 500 MM WIRING (D) Harness for starter & metering, Thimbles, Ferrules, Sleeves, PVC channel, Gourmets, Braided wire for earthing etc HARDWARE (E) (Nuts, Bolts, Spring washers, Door hinges, Door Locks & Key, Lifting hocks, Base channel, C-type Channels, DMC Busbar Insulators etc) ACCESSORIES (F) Danger plate, Feeder detail Inscription plates, Acrylic/Bakelite/Perforated sheet cover for busbar, Door gasket etc. NS-2

Pdg. & Fixing of Wire Mesh Jali around the Transformer of size 4' x 8' made out of 75 x 25x 3.25 mm Jali fixed with angle iron frame made out of MS Angle 50 x 50 x 6 mm support of MS flat 50 x 6 mm and fixed in CC block 1:2:4 incliding cutting, welding etc. as per drawing complete in all respect upto the entire satisfaction of the Engineer - in - charge. NS-3

Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 11 metres long 152 mm x 203 mm at top and 152 mm x 368 mm at bottom with working load of 360 Kg. burried 2.20 m in ground. NS-4

Supply & erection of GSL wire 7/8 SWG conforming to ISS 280/1975/1963 with latest amendment complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work NS-5

Supply & erection of lighting arrestor model ALPRO / Alastem / LEMCO make suitable for 11KV 3 Phase 50 HZ ground neutral system comprising of spare gape type queen gap type in series with non linger resitar element house in Horizontally scale poreclam bushing with line and ground terminal along with mounting clamps conforming to ISS 3070 (Part-I) of 1985 with latest amendment with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. NS-6

Providing & fixing of stay set complete in all respect upto the entire satisfaction of Engineer-in-Charge. NS-7

Providing & fixing of stay wire complete in all respect upto the entire satisfaction of Engineer-in-Charge. NS-8

Supply & erection of 11KV pin insulator (Jayshree make) with pin with all labour and material required to the complete the job included the fixing the same on existing channels up to entire satisfaction of the Engineer-in-Charge of the works. NS-9

Supply & erection of 11KV Disc insulator (Jayshree make) with pin with all labour and material required to the complete the job included the fixing the same on existing channels up to entire satisfaction of the Engineer-in-Charge of the works. NS-10

Supply and erections of 11 KV protection CT and PT with latest amendments complete in all respect upto the entire satisfaction of Engineer-incharge NS-12

S/I/T/C of Bidirectional HT meter 0.2 Accuracy with all required material thimble lugs etc. upto the entire satisfaction of Engineer in charge of work (As per approved make of UHBVNL department : L&T and Secure). NS-13

S/I/T/C of Meter Tubical Box with all required material complete in all respect upto the entire satisfaction of Engineer in charge of work (As per approved make of UHBVNL department: Shiv Electrical). NS-14

S/I/T/C of Test Terminal Block (TTB) with all required material complete in all respect upto the entire satisfaction of Engineer in charge of work (As per approved make of UHBVNL department: Universal). NS-15

Supply and erection of MS Channel 100x 50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (As per UHBVNL make and specification). NS-16

Supply and erection of MS angle 50x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (As per UHBVNL make and specification). NS-17

Supply and erection of MS flat 50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (As per UHBVNL make and specification). NS-18

Providing and fixing of Nut and Bolts of size as per ISI specifications of Engineer-in-charge. (As per UHBVNL make and specification). NS-19

Supply of 95 Sqmm 3.5 Core Grandlay make, Armd. cable PVC/XLPE insulated ( Heavy Duty) Electrical Cables for working voltage upto and including 1100 Volts to IS:1554 (PART-I) with Aluminium conductor-ISI marked Power Cable - Aluminium Conductor (Make : Grandlay, Polycab, Plaza). NS-20

Supply of 185 Sqmm 3.5 Core Grandlay make, Armd. cable PVC/XLPE insulated ( Heavy Duty) Electrical Cables for working voltage upto and including 1100 Volts to IS:1554 (PART-I) with Aluminium conductor-ISI marked Power Cable - Aluminium Conductor (Make : Grandlay, Polycab, Plaza). NS-21

Supply of 240 Sqmm 3.5 Core Grandlay make, Armd. cable PVC/XLPE insulated ( Heavy Duty) Electrical Cables for working voltage upto and including 1100 Volts to IS:1554 (PART-I) with Aluminium conductor-ISI marked Power Cable - Aluminium Conductor (Make : Grandlay, Polycab, Plaza). NS-22

Ecs Engineering Chd. Pvt. Ltd.

M/S PANJETA ELECTRICALS