CPPP

Active

Works

Civil Works

Repair and replacing of roofing sheet along with other maintenance works in IWT Terminal at Alappuzha in NW-3

Inland Waterways Authority of India,MoS

IWAI Terminal Alappuzha | Alappuzha, Kerala

Amount: ₹7.8 LCloses: 2 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published19 Oct 2026
Closes2 Nov 2026
Bid Opening3 Nov 2026

Tender Value

₹7.8 L

EMD Value

₹15,591

Closing Date

2 Nov 2026, 3:00 pm

Tender Inviting Organisation

Name

The Director, IWAI, RO Kochi

Address

The Director, Inland Waterways Authority of India, National Waterway Road, Kannadikkadu, Maradu, Ernakulam, Kerala. PIN 682304.

Work Description

Repair and replacing of roofing sheet along with other maintenance works in IWT Terminal at Alappuzha in NW-3

Tender Information

Tender ID

2026_IWAI_930899_1

Reference Number

IWAIKc-14/26/2026-DIRkochi/31

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

90 days

Location

IWAI Terminal Alappuzha

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

16 documents required · 16 mandatory

Fee/PreQual/Technical

RequiredScanned copy of the Tender Acceptance Letter duly signed and stamped. (.pdf)

RequiredScanned copy of the Form of Tender duly signed and stamped. (.pdf)

RequiredScanned copy of Self Declaration form (as at Annexure-1). (.pdf)

RequiredScanned copy of Tender document downloaded from e-procure site duly signed and stamped. (.pdf)

RequiredPayment receipt of tender cost or MSME registration certificate for claiming exemption. (.pdf)

RequiredPayment receipt of EMD or MSME registration certificate for claiming exemption. (.pdf)

RequiredContractors Registration certificate from concerned Authorities. (.pdf)

RequiredDetails of experience in the form at Annexure-2 and copies of experience certificate. (.pdf)

RequiredLatest Solvency certificate not less than Rs. 3.12 lakhs issued by Nationalised / Scheduled Bank. (.pdf)

RequiredLetter of Authority for signing and negotiation of tender (as the case may be). (.pdf)

RequiredDuly signed Integrity Pact (given in Part-II, General conditions) (.pdf)

RequiredPermanent Account Number (PAN) issued by Income Tax Department. (.pdf)

RequiredAudited P and L account, balance sheets, ITR, turn over certificates with UDIN for the last 3 years (.pdf)

RequiredGoods and Services Tax Registration number including copy of registration certificate. (.pdf)

RequiredCopy of registration with EPFO and ESIC. (.pdf)

Finance

RequiredBoQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,180

Tender Fee Exemption Allowed

Yes

Tender Fee Payable To

Inland Waterways Authority of India, RO Kochi

EMD Fee Amount

₹15,591

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

19 Oct 2026

Published

19 Oct 2026

Bid Opening

3 Nov 2026

Download Starts

19 Oct 2026

Download Ends

2 Nov 2026

Submission Starts

19 Oct 2026

Bill of Quantities

Item WiseBoQ_Ver3.0INR

BoQ1 (11 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Dismantling Works
1.01	Dismantling and removal of existing roofing sheets in godwon area including ridges, hips, valleys, etc. without causing any damages to structural members. The rate shall include labour charges, hire charges for machineries/tool, scaffolding etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead of the site as and where directed by the E-I-C	117.6	sqm	-	-
1.02	Dismantling of existing pre-coated galvanized steel sheet / PVC rain water gutter provided along eaves of roof, including necessary clamps, end caps, angles, outlets, bends, elbows, self-drilling/self-tapping screws, EPDM washers, and disconnecting from down take pipes, complete. The rate shall include labour charges, hire charges for machineries/tool, scaffolding etc., including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, as directed by Engineer-in-Charge, complete for entire roofing area of godown and office portion.	1	job	-	-
2Roofing
2.01	Providing & fixing of 0.71mm Aluminium colour coated troughed profile roofing sheet with center to center pitch of 200mm, depth of 32mm, overall profile width 1092 mm, cover width 1000mm at all heights, levels and locations colour finsih Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping stainless steel screws M6, 50 mm long with 3mm EPDM seal washer etc, all inlcusive of labour, scaffolding, T&P and sundries etc. complete as per direction of the Engineer-in-charge.	120	sqm	-	-
2.02	Providing and fixing pre-coated galvanized steel sheet / PVC rainwater gutter along eaves of the roof, including necessary clamps, end caps, angles, outlets, elbows, self-drilling/self-tapping screws, EPDM washers, pvc down pipes and connection to downpipes, complete as per the direction of Engineer-in-charge, fixed to roof purlins / truss members. Measurement in linear metre. The rate shall includes cost of labour, material cost, hiring charges, machineries/tool, scaffolding etc.	200	m	-	-
3Painting works
3.01	Preparing the surface of existing structural steel stair by thorough scraping, chipping and wire brushing (manual/mechanical) to remove heavy rust, mill scale, old loose/deteriorated paint, dirt, grease and other foreign matter, followed by sand papering to smoothen the surface and expose clean metal, complete as required to receive primer/paint, including cleaning of dust and debris, as directed by Engineer-in-Charge.	1	Ls	-	-
3.02	Finishing with Epoxy paint (two or more coats) at prepared surfaces and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete on existing structural steel stair, as directed by Engineer-in-Charge. The rate shall include labour, brush / roller, charges, etc.	251.32	sqm	-	-
4Miscellaneous works

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.47 MB

Work Item Documents

BOQ_978235.xls

BOQ • 0.24 MB

Tender.pdf

Tender Documents • 1.10 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Dismantling Works
1.01	Dismantling and removal of existing roofing sheets in godwon area including ridges, hips, valleys, etc. without causing any damages to structural members. The rate shall include labour charges, hire charges for machineries/tool, scaffolding etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead of the site as and where directed by the E-I-C	117.6	sqm	-	-
1.02	Dismantling of existing pre-coated galvanized steel sheet / PVC rain water gutter provided along eaves of roof, including necessary clamps, end caps, angles, outlets, bends, elbows, self-drilling/self-tapping screws, EPDM washers, and disconnecting from down take pipes, complete. The rate shall include labour charges, hire charges for machineries/tool, scaffolding etc., including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, as directed by Engineer-in-Charge, complete for entire roofing area of godown and office portion.	1	job	-	-
2Roofing
2.01	Providing & fixing of 0.71mm Aluminium colour coated troughed profile roofing sheet with center to center pitch of 200mm, depth of 32mm, overall profile width 1092 mm, cover width 1000mm at all heights, levels and locations colour finsih Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping stainless steel screws M6, 50 mm long with 3mm EPDM seal washer etc, all inlcusive of labour, scaffolding, T&P and sundries etc. complete as per direction of the Engineer-in-charge.	120	sqm	-	-
2.02	Providing and fixing pre-coated galvanized steel sheet / PVC rainwater gutter along eaves of the roof, including necessary clamps, end caps, angles, outlets, elbows, self-drilling/self-tapping screws, EPDM washers, pvc down pipes and connection to downpipes, complete as per the direction of Engineer-in-charge, fixed to roof purlins / truss members. Measurement in linear metre. The rate shall includes cost of labour, material cost, hiring charges, machineries/tool, scaffolding etc.	200	m	-	-
3Painting works
3.01	Preparing the surface of existing structural steel stair by thorough scraping, chipping and wire brushing (manual/mechanical) to remove heavy rust, mill scale, old loose/deteriorated paint, dirt, grease and other foreign matter, followed by sand papering to smoothen the surface and expose clean metal, complete as required to receive primer/paint, including cleaning of dust and debris, as directed by Engineer-in-Charge.	1	Ls	-	-
3.02	Finishing with Epoxy paint (two or more coats) at prepared surfaces and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete on existing structural steel stair, as directed by Engineer-in-Charge. The rate shall include labour, brush / roller, charges, etc.	251.32	sqm	-	-
4Miscellaneous works

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Dismantling Works

1.01

Dismantling and removal of existing roofing sheets in godwon area including ridges, hips, valleys, etc. without causing any damages to structural members. The rate shall include labour charges, hire charges for machineries/tool, scaffolding etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead of the site as and where directed by the E-I-C

117.6

sqm

1.02

Dismantling of existing pre-coated galvanized steel sheet / PVC rain water gutter provided along eaves of roof, including necessary clamps, end caps, angles, outlets, bends, elbows, self-drilling/self-tapping screws, EPDM washers, and disconnecting from down take pipes, complete. The rate shall include labour charges, hire charges for machineries/tool, scaffolding etc., including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, as directed by Engineer-in-Charge, complete for entire roofing area of godown and office portion.

job

2Roofing

2.01

Providing & fixing of 0.71mm Aluminium colour coated troughed profile roofing sheet with center to center pitch of 200mm, depth of 32mm, overall profile width 1092 mm, cover width 1000mm at all heights, levels and locations colour finsih Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping stainless steel screws M6, 50 mm long with 3mm EPDM seal washer etc, all inlcusive of labour, scaffolding, T&P and sundries etc. complete as per direction of the Engineer-in-charge.

120

sqm

2.02

Providing and fixing pre-coated galvanized steel sheet / PVC rainwater gutter along eaves of the roof, including necessary clamps, end caps, angles, outlets, elbows, self-drilling/self-tapping screws, EPDM washers, pvc down pipes and connection to downpipes, complete as per the direction of Engineer-in-charge, fixed to roof purlins / truss members. Measurement in linear metre. The rate shall includes cost of labour, material cost, hiring charges, machineries/tool, scaffolding etc.

200

3Painting works

3.01

Preparing the surface of existing structural steel stair by thorough scraping, chipping and wire brushing (manual/mechanical) to remove heavy rust, mill scale, old loose/deteriorated paint, dirt, grease and other foreign matter, followed by sand papering to smoothen the surface and expose clean metal, complete as required to receive primer/paint, including cleaning of dust and debris, as directed by Engineer-in-Charge.

3.02

Finishing with Epoxy paint (two or more coats) at prepared surfaces and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete on existing structural steel stair, as directed by Engineer-in-Charge. The rate shall include labour, brush / roller, charges, etc.

251.32

sqm

4Miscellaneous works