Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.2 LAccepted-AOC 21 1307 B ANUPALLAVI PALLURUTHY COCHIN 682006 | COCHIN | ERNAKULAM | KERALA | 682006 | 1 | Accepted-AOC AGREEMENT EXECUTED | |
| 2 | Rejected-Technical | - | Rejected-Technical REJECTED |
| Sl No | Description | Qty | Unit | AJITH L2 | CHANDRAMOHANAN L1 |
|---|---|---|---|---|---|
| 1.00Providing EI | |||||
| 1.00 | OD491037/2024-2025:Fabrication, supply, conveyance, installation testing and commissioning of floor or
wall mounting, dust and vermin proof, cubicle type MV panel board comprising of
the following components/ devices & complying to IS 8623.
Incoming
100A 4 P TPN SF HRC with 80AHRC fuse -1 no
Out going
40A 2P MCB Isolator- 10 nos
32A HRC fuse unit with 20A HRC -10 nos
32A neutral link - 10nos
Provision for providing 10 nos single phase energy meter with vision glass,
20x6mm copper TPN BUS BARS ,20X3MM Copper earth bus entire length of panel board
providing necessary locking arrangement
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly
as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved
design and requirement, with front and rear access facility, bus bar chambers, hinged
doors for all switch gear compartments, earthing the doors using 4 sq mm braided
copper conductor, providing necessary cut-outs for mounting meters, relays,
indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber
and cable alley, powder coating the assembly after subjecting to 7 tank process etc as
required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles
etc shall not be used for the fabrication of panel assembly. ,
folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA
sheet, powder coated | 1 | each | 94,000 ₹94,000 | 93,106 ₹93,106 Lowest |
| 1.00 | OD491049/2024-2025:Fabrication, supply, conveyance, installation testing and commissioning of floor or
wall mounting, dust and vermin proof, cubicle type MV panel board comprising of
the following components/ devices & complying to IS 8623.
Incoming
160A 4 P TPN SF HRC with 120A HRC fuse -1 no
Out going
40A 2P MCB Isolator- 14 nos
40A 4P MCB Isolator- 2 nos
32A HRC fuse unit with 20A HRC -20 nos
32A neutral link - 16nos
Provision for providing 14 nos single phase energy meter and 2 nos three phase energy meter with vision glass,
25x6mm copper TPN BUS BARS ,
20X3MM Copper earth bus entire length of panel board
providing necessary locking arrangement
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly
as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved
design and requirement, with front and rear access facility, bus bar chambers, hinged
doors for all switch gear compartments, earthing the doors using 4 sq mm braided
copper conductor, providing necessary cut-outs for mounting meters, relays,
indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber
and cable alley, powder coating the assembly after subjecting to 7 tank process etc as
required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles
etc shall not be used for the fabrication of panel assembly. ,
folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA
sheet, powder coated | 1 | each | 1,08,000 ₹1,08,000 | 1,07,032 ₹1,07,032 Lowest |
| 1.00 | 90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC) | 8 | metre | 1,230 ₹9,840 | 1,128 ₹9,024 Lowest |
| 1.00 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board | 50 | kg | 210 ₹10,500 | 180 ₹9,000 Lowest |
| 1.00 | 2.21:Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. | 2 | each | 310 ₹620 | 292 ₹584 Lowest |
| 1.01 | OD489661/2024-2025:Painting letters or figures of the following sizes with enamel paint as identification marks to MB,SMB,DB etc, 2.5cmx4cm | 200 | each | 15 ₹3,000 | 12 ₹2,400 Lowest |
| 1.01 | 1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm | 10 | metre | 75 ₹750 | 71 ₹710 Lowest |
| 1.01 | 1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm | 10 | metre | 120 ₹1,200 | 111 ₹1,110 Lowest |
| 1.01 | OD489660/2024-2025:Supply and providing 12x3mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes | 4 | each | 30 ₹120 | 24 ₹96 Lowest |
Tender Value
₹2.9 L
EMD Value
₹7,333
Closing Date
27 Mar 2025, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE Ernakulam Cochin corporation
SE COCHIN CORPORATION
453648/25-Standardisation of panel boards in Commercial complex and main building, Zonal office Compound, Vyttila ,Division 53 ,
2025_LSGD_753976_1
453648/25-Standardisation of panel boards in Commercial complex and main building
Open Tender
Electrical Works
Item Rate
60 days
ERNAKULAM
Please refer Tender documents.
8 documents required · 8 mandatory
₹650
₹7,333
11 Nov 2025
22 Mar 2025
29 Mar 2025
22 Mar 2025
27 Mar 2025
22 Mar 2025
Amount
Providing EI
OD491037/2024-2025:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Incoming 100A 4 P TPN SF HRC with 80AHRC fuse -1 no Out going 40A 2P MCB Isolator- 10 nos 32A HRC fuse unit with 20A HRC -10 nos 32A neutral link - 10nos Provision for providing 10 nos single phase energy meter with vision glass, 20x6mm copper TPN BUS BARS ,20X3MM Copper earth bus entire length of panel board providing necessary locking arrangement Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. , folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated
OD491049/2024-2025:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Incoming 160A 4 P TPN SF HRC with 120A HRC fuse -1 no Out going 40A 2P MCB Isolator- 14 nos 40A 4P MCB Isolator- 2 nos 32A HRC fuse unit with 20A HRC -20 nos 32A neutral link - 16nos Provision for providing 14 nos single phase energy meter and 2 nos three phase energy meter with vision glass, 25x6mm copper TPN BUS BARS , 20X3MM Copper earth bus entire length of panel board providing necessary locking arrangement Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. , folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated
90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)
90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board
2.21:Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
OD489661/2024-2025:Painting letters or figures of the following sizes with enamel paint as identification marks to MB,SMB,DB etc, 2.5cmx4cm
1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm
1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm
OD489660/2024-2025:Supply and providing 12x3mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes
OD489663/2024-2025:Supply and providing 25x6mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes
OD489662/2024-2025:Earthing with G.I. earth pipe 2 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required
90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)
90.16.1.4:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)
90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)
90.16.5.4:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG)
90.12.5.29:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 50 sq mm
90.12.9.4:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench77/63 mm or nearest size
9.1.22:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
9.2.19:Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm
9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)
9.1.7:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 sq. mm (22mm)
OD489657/2024-2025:Dismantling the existing damaged panel board and conveyance the same from site to section store with out any further damage
OD491063/2024-2025:Charges for disconnecting the DB connections from existing panel board and re- connecting the same on proposed panel ,checking the status in good condition
AJITH (BID ID -2169560)
Bidder Name
CHANDRAMOHANAN
AJITH
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .