SPECIAL REPAIR TO BLDG NO T-23,T-9,T-6,T-10 AND PROVN OF STORE FOR FUEL OIL AND LUBRICANTS INCLUDING MECHANICAL TRANSPORT SPARES AT GULMARG UNDER GE 969 EWS

Amount

Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above GL) unreinforced, complete all as specified and as directed.

M&L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, complete all as specified and as directed.

M&L 75 mm thick Cement concrete type B-1, 1:4:8 (20mm graded aggregate) in sub base of flooring, complete all as specified and as directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for Joint free Non - skid Ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick bedding layer in CM (1:4), complete all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit, complete all as specified and as directed.

All as per above item here in before but n exc 1.5 Sqm each, complete all as specified and as directed.

Taking down shutters of any description area exc 2 Sqm each and refixing in same opening after necessary repairs/re-size, complete all as specified and as directed.

Taking down shutters of any description or type area exc 1.00 Sqm but n.exc 2 sqm and refixing in same opening after necessary repairs/re size, complete all as specified and as directed.

S&F Powder coated Anodised aluminums frame for sliding windows, ventilators and with one or more rebates including joining cleat and handles and other necessary fittings for fixing etc, complete all as specified and as directed.

S&F Powder coated Anodized Aluminium window and ventilators shutters, without sash bar, aluminum section weighting 0.55kg / m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, locking arragement,Handles etc, complete all as specified and as directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows, complete all as specified and as directed.

Supply and fixed 2nd class hard wood 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and as directed.

S&F Butt hinges,100mm medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed.

S&F Brass, sliding door bolt 250mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and as directed.

Hacking out broken glass any thickness, size, quality, from wooden frame/steel frames fixed with putty or with wooden beads, complete all as specified and as directed.

S&F Sheet glass 5 mm thick ordinary quality one way glazing with rubber gasket in square not exc 0.5 sqm each pane, complete all as specified and as directed.

Taking down GI water tubing and connections and taken in to schedule of credit for 20mm bore, complete all as specified and as directed.

S&F tubing, medium grade, galvanised, 20 mm bore with all fittings; fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

M&L for lagging on 20mm internal dia pipe all round with 50 mm thick bonded mineral wool pre-formed 'SNAP ON' pipe section of density of 144 Kg/Sqcm confirm to IS 9842 including providing with chicken mesh wire netting 25 gauge 20 mm mesh and 0.01 mm aluminium foil etc, complete all as specified and as directed.

S&F 20mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wall, celings or in floors, complete all as specified and as directed.

Supply and Fixing PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and as directed.

Supply and Fixing PP-R Ball valves (brass insert) as per requirement of the site, complete all as specified and as directed.

S&F vitreous china wash down water closet (Single unit) including flushing cistern white/coloured as approved by GE, Cascade type, complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

S&F in repairs 15mm fancy type chromium plated angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F in repairs bib cock long body with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed, complete all as specified and as directed.

S&F in repair Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed.

S&F in repairs PVC gully trap with cover of size 125mm including PCC bed, complete all as specified and as directed.

S&F 75mm PVC (SWR) floor trap, plain with grating incl jointing with solvent cement etc, complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints laid in trenches or floors, complete all as specified and as directed.

S&F PVC (SWR) bends 75mm bore, complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints laid in trenches or floors all as specified.

S&F PVC (SWR) bends 110mm bore, complete all as specified and as directed.

S&F 110mm PVC (SWR) junction single (single T) equal or unequal, complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting ,any gauge, thickness, including Nainital or similar pattern roof coverings in any position, complete all as specified and as directed.

S&F0.63mm thick grade with 120gm per sqm zinc coating corrugated galvanised iron steel sheeting with two corrugaion side lap (Horizontal distance of side and end lap shall not be less than 145mm and 150mm respecively fixed with L Type or J Type or cranked hook bolts in roof, complete all as specified and as directed.

All as per above item No. 38 but except sheeting

S&F 0.80mm thick grade Plain with 120gm per sqm zinc coating, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings, complete all as specified and as directed.

Preparing new zinc (or galvanized) surfaces to receive painting by applying two coats of synthetic enamel paint over a coat of etch primer, complete all as specified and as directed.

Preparation of old painted zinc or galvanised surface of any description and in position and applying one coat of synthetic enamel paint all as specified. Note :-(a) The surface of corrugated steel sheeting shall be measured flat (not girth) without any extra allowance for laps and the area obtain shall be increased by 14%). (b) The surface of plain steel sheeting as in ridge, hips, velley gutters, flashings etc, shall be measured flat alongwith girth (length and firth as fixed) and the area obtained shall be added to the area of corrugated steel sheeting.Complete all as specified as directed by engr-in-charge.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed.

S & F 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on Ceiling, complete all as specified and as directed.

S & F 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on wall, complete all as specified and as directed.

M&L for 5 mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining, and solid PVC partions & Ceiling etc inclusive of solvent cement & fixing at site, complete all as specified and as directed.

M&L preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats synthetic enamel paint over one coat of prink primer, complete all as specified and as directed.

M&L preparation of old painted surface of wood and wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamal paint, complete all as specified and as directed.

Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and directed.

Dismantling timber scantling under 40 sq cm in section in any position as in unframed/framed work, complete all as specified and directed.

M&L 2nd Class soft wood (Kail) as in scantling, clean swan timber fixed, complete all as specified and as directed.

M&L 2nd class soft wood Plain fillets exc 13 Sq.cm , n exc 25 Sq.cm rectangular in section, complete all as specified and as directed.

M&L 2nd class soft wood Plain fillets exc 3 Sq.cm but n.exc 6 Sq cm , rectangular in section, clean sawn screwed with nails or brads, complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cm incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in in CM (1:4), , complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 and finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4), , complete all as specified and as directed.

All as above item No. 57 but except Stone, complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement mixing with integral water proofing compound, complete all as specified and as directed.

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces on wall in CM 1:4 finished even and smooth without using extra cement mixed with water proofing compound Note : WPC shall be measured and paid separately.

Supply only Integral water proofing liquid compound, complete all as specified and as directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, for Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and as directed.

M&L Plain Cement concrete 1:3:6 type C-2 (40 MM graded aggregate) in foundation, filling and mass concrete, complete all as specified and as directed.

M&L Granite (of any type)18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing , complete all as specified and as directed.

Rounding to edges of Granite/stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and as directed.

Per- cast reinforced cement concrete (1:2:4 nominal mix ) type B-I, (Using 20mm grade stone agg) set in cement mortar 1:4 as in manhole cover, complete all as specified and as directed.

TMT MS bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns ends and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

M&L for 100mm thick cement concrete D-2, 1:4:8 using 20mm graded stone aggregate as in sub-floors, sub-bases, floors and pavings etc, complete all as specified and as directed.

M&L 100mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in floors and paving including finishing the surface of concrete topping even & smooth without using extra cement, complete all as specified and as directed.

S&F 100 mm Extruded aluminium alloy handles, fabricated type anodised, complete all as specified and as directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type anodised, complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy and fixed, complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coataing GI based profile steel sheet 0.50 mm thick of any colour having tnsile strength of 550 MPA as in roof covering/cladding to wall,fixed with self tappping screw, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

All as per above item No. 76 but except sheeting, complete all as specified and as directed.

M&L for 6 mm thick plywood, grade BWR type BB, fixed with nails to timber frame work on wall and ceiling etc, complete all as specified and as directed.

M&L Weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litres/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces, complete all as specified and as directed.

M&L for applying one coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litres/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces, complete all as specified and as directed.

S&F Softwood 2nd class Clean sawn with butt joints Eaves boards 20 mm thick, complete all as specified and as directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4), complete all as specified and directed.

M&L Rendering 10 mm thick in cement and sand mortar (1:6) on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.

M&L Rendering 15 mm thick in cement and sand mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing with using integral waterproofing compound @ 3% by weight of cement including finishing the surface even and smooth without using extra cement complete all as specified. (Note - W P C shall be measured and paid separately).

M&L machine cut Kota stone slab flooring 20-25mm thickas per sample kept in GE's office,laid over and incl 15mm thick cement screed base in CM 1:6 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polshing to achive mirror finish, complete all as specified and as directed.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer with CM 1:4 15mm thick for laying floor finishes, complete all as specified and as directed.

Taking down shutters of any description area exc 1.00 Sqm and n exc 2 Sqm each, complete all as specified and as directed.

Taking down shutters of any description n.exc 1.00 Sqm each, complete all as specified and as directed.

S&F second class hard wood 35mm flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, complete all as specified and as directed.

S&F Factory made PVC solid door/window/ventilator frame of size 50mm sheet in stead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M S square tube complete frame fixed with screws/nails /bolts to walls, complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Taking down GI water tubing and connections and taken in to schedule of credit for 15mm bore, complete all as specified and as directed.

S&F tubing, medium grade, galvanised, 15 mm bore with all fittings; fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

S&F in repairs vitreous China squatting pan ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor, complete all as specified and as directed.

S&F in repairs vitreous China wash basin, white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed.

S&F in repairs 10 liters capacity PVC low level flushing cistern complete with ISI marked body and ISI marked syphon, complete all as specified and as directed.

S&F in repairs pillar cock, fancy type chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore, complete all as specified and as directed.

S&F Towel rail 600mm long of SS fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and as directed.

S&F PVC SWR vent cowl 110mm bore, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

M&L painting new steel or iron surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide/zinc chrome primer incl prepation of surfaces, complete all as specified and as directed.

M&L painting old steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint incl preparation of surfaces, complete all as specified and as directed.

Dismantling fillets,rails,posts,rafters,purlins,etc under 40Sqcm in section, complete all as specified and as directed.

M&L 2nd class soft wood Plain fillets n.exc 3 Sq.cm , rectangular in section, clean sawn screwed with nails or brads, complete all as specified and as directed.

Excavating over areas, n exc 1.5 m deep and getting out hard/dense soil, complete all as specified and as directed.

Returning, filling in,spreading, levelling, watering and well ramming in layers, not exceeding 25cm thick each, complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointand depositing where directed in soil, complete all as specified and as directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface nexc 40mm to face stones and dressing of face beds and joints,as specified,of random rubble walling,uncoursed or brought upto coursese for lime or sand stone, complete all as specified and as directed.

M&L Flush pointing in cement mortar 1:4 to random rubble masonry, uncoursed or brought upto courses, complete all as specified and as directed.

Hand packing (any thickness) at back of walls ove arches(Broken stone or boulders) etc and raising (or lowering) to the required level, complete all as specified and as directed.

Plain cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in benching, bed plates, coping and the like including necessary formwork and finishing all exposed surface of concrete as per clause 4.11.16.2(a) & (d) of SSR Part-I, complete all as specified and as directed.

M&L pre cast cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) set in cement mortar 1:6 in bond stone for stone masonry and the like including necessary formwork, complete all as specified and as directed.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutters from the frames) .exc 1.5 sqm each but n. exc 4.00 sqm, complete all as specified and as directed.

Taking down chowkhats with shutters without taking off shutters from the frame incl iron mongry hold fasts etc area n. exc 1.5 sqm, complete all as specified and as directed.

M&L Machine pressed rubber moulded coloured precast concrete interlocking paver block(PU COATED) any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment, complete all as specified and as directed.

M&L cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and 1.5m depth for foundation etc or for shaft well, cesspits etc n.exc on plan and n.exc 1.5m depth and getting out in hard/dense soil.

M&L for rendering 15mm thick in cement mortar 1:4 on on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing including finishing to surfaces even and smooth without using extra cement etc, complete all as specified and as directed.

M&L for cement concrete type C2, 1:3:6 (40mm graded aggregate) as in surface channel and drains, complete all as specified and as directed.

Extra for forming fair finished drain channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc, complete all as specified and as directed.

M&L for providing precast cement concrete type B-1, 1:2:4 (20mm graded aggregate) and set in cement mortar 1:6 in landings, cover slabs (for manholes/ drain cover) etc, complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out hard and dense soil, complete all as specified and as directed.

M&L for use & waste of fair finished flat formwork to surfaces of concrete, form work to sides of plinth beam, footings, bases of columns etc, complete all as specified and as directed.

M&L for RCC M-25 (design mix) using 20mm graded aggregate as in fdn, footing, plinth beam, bases for columns etc, complete all as specified and as directed.

M&L for use & waste of fair finish square or rectangle shape formwork to sides of pillars, posts , struts, piers, columns etc, complete all as specified and as directed.

M&L for RCC M-25 (design mix) using 20mm graded aggregate as in columns etc, complete all as specified and as directed.

M&L for use & waste of fair finished flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and as directed.

M&L for RCC M-25 (design mix) using 20mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed.

M&L for use & waste of fair finished flat formwork to chullah hoods, chajjas, troughs and similar items including edges etc, complete all as specified and as directed.

M&L for RCC M-25 (design mix) using 20mm graded aggregate as in chajjas, complete all as specified and as directed.

M&L TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and as directed.

M&L for preparing newly plastered or unplastered surfaces of walls and applying two coats of distemper oil emultion over a coat of chalk whiting, complete all as specified and as directed.

M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

M&L kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid including 15mm thick rendering in cement mortar (1:4) and jointed, complete all as specified and as directed.

S&F 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle boarde with commercial veneering on both faes. The size of rail and stile (second class hardwood) as per IS-1003 (part-I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed.

S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Section specified 8 clause 8.24(b), complete all as specified and as directed.

S&F steel ventilators with top hung shutter including hinges steel peg stay, complete all as specified and directed.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and as directed.

S&F Butt hinges, 75 mm long medium weight, cold rolled mild steel, ISI marked, complete all as specified and as directed.

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches. ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe Custody for reuse at site and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor

(a) One light point/fan point/Exhaust fan point controlled by one 5 Amps switch one way

(b)One 3 pin 5 Amp switch socket outlet on independent board.

(c)One 3 pin 5 Amp switch socket outlet on same board with accessories.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

S&F switch Flush type, single pole, one way 6 amp 240 volts, complete all as specified and directed.

S&F switch Flush type, single pole, 15 amp 240 volts, complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with gang box all as specified and as directed.

Supply and fixing ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and as directed.

S&F Distribution Board, SPN, 12 Way,Double door complete all as specified and as directed.

S&F in repairs MCB DP 40 Amps 240 Volts B curve, complete all as specified and as directed.

S&F MCB single pole 6-32A amps 240 Volts B curve, complete all as specified and as directed.

S&F LED lights fitting 1x20 Watt , 220 Volt AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

S&F, LED bulb 12 W, 220 V suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and as directed.

S&F lamp Holder, PVC/Polycarbonate type with black plate suitable for batten fitting complete all as specified and as directed.

S&F in repair Sub main wiring using two runs of single core PVC insulated cable with copper conductor multistranded 1000 volts of size 6.0 Sqmm through existing/new in wall with PVC doncuit including copper wire in green colour of size 6.0 Sqmm connection to DB with thimbling, complete all as specified and as directed. Note : Two runs of sub main wire including earth wire and rigid non metallic PVC conduit shall be measured as one unit per RM make of cable) Contractor must make wall/ceiling cheasel cutting and after fixing make surface good as it is.

S&F Flush type Socket outlet 6 Amps, complete all as specified and as directed. Note : Taking down of socket outlet including in taking down point wiring.

S&F switch socket combination 5 pin 15A flush type, complete all as specified and as directed.

S&F Distribution Board, SPN, 8 Way,Double door complete all as specified and as directed.

S&F amp rating 240V, 10KA C' curve miniature circuit breaker (MCB) of SPN 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5-32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.

S&F LED Lamp 15 W. complete all as specified and as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR 2020 part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia Gl pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note: The rate is inclusive of necessary earth work, RFR and removal etc

Point wiring in ERW Steel Conduit Surface type including all fittings with 1.5 Sqmm size multi stranded ( FRLS) flexible copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including sheet steel boxof 1.6 mm thick and bakelite sheet 3 mm thick and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.One light fan point controlled by one way switch 5 Amp, completed all as specified and directed by Engr-in-Charge.

Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V, complete all as specified and as directed.

S&F Flame proof sheet metal enclosure MCB Distribution Board AC SPN 240 Volts, 50 Hz 8 Way with IP-43 IK-09 Protection double door Complete with 200 Amp Bus Bar and neutral link and complete all as specified and as directed.

S&F LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IlIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and as directed.

S&F LED Flame Proof Bulkhead luminaires 1x10 CMRI certified recommended for gas/ vapor group of lIA & IIIB, Zone 1&2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

Supply and laying XLPE insulated PVC FRLS, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade Cross-Sectional area galvanized steel strip or Wire armoured, of size 2 core 16 Sq mm.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation, laying of cables, etc. and getting out in Soft/loose soil, complete all as specified and as directed.

Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection complete all as directed. (Note The punned down thickness shall only be measured)

Supply and laying sub class 'B' bricks laid across the cable for cable protection, complete all as specified and as directed.

S&F electric water heater, storage vertical type outer body Engineering Thermoplastic plastic with puf injected type insulation, Steel tank with glass lined coating inner tank and heating element (Copper tube) upto 2KW capacity 25 litre, 230 volts AC single phase BEE 5 Star rated complete with all accessories such as FR Grade 3 core PVC Cord, multifunctional safety valve, thermostate, connection piece etc, complete all as specified and as directed.

Note:- Schedule of credit Rs 1,02,868.40 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S G M DAR AND SONS (BID ID -3271231)

ABID CONSTRUCTION COMPANY (BID ID -3270127)

M/s Riyaz Enterprises (BID ID -3271173)

M/S Manzoor and Co (BID ID -3279240)