Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.8 LAccepted-AOC NAU P O TEH SADAR AUT DISTT MANDI HIMACHAL PRADESH 175001 | AUT | MANDI | HIMACHAL PRADESH | 175001 | L1 | Accepted-AOC As the quoted amount is well within the estimated and justified cost | |
| 2 | L2₹3.9 L+₹2,537 (0.66%)Rejected-Finance 03 SHIAH SHIAH BHUNTER NEENU KULLU HIMACHAL PRADESH 175141 | KULLU | HIMACHAL PRADESH | 175141 | L2 | Rejected-Finance quoted rates are higher | |
| 3 | L3₹3.9 L+₹3,965 (1.03%)Rejected-Finance H NO 54 8 DARMYANA MUHALLA DISTT MANDI 1750051 | MANDI | MANDI | HIMACHAL PRADESH | 175005 | L3 | Rejected-Finance quoted rates are higher | |
| 4 | L4₹3.9 L+₹7,265 (1.89%)Rejected-Finance | L4 | Rejected-Finance quoted rates are higher |
Tender Value
₹3.9 L
EMD Value
₹7,745
Closing Date
25 Apr 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer IIT Mandi
Superintending Engineer IIT Mandi HP-175075
Extension of utensil washing area and hand washing area in D-10 and D-12 Dinning blocks at North Campus IIT Mandi, H.P.
2022_IITMD_684372_1
IIT Mandi (CW)/SE-1258/2022-23/216-18 dt. 18-04-22
Open Tender
Civil Works
Item Rate
30 days
North Campus of IIT Mandi
please refer to NIT
2 documents required · 2 mandatory
₹1,180
The Registrar IIT Mandi
₹7,745
5 May 2022
18 Apr 2022
26 Apr 2022
18 Apr 2022
25 Apr 2022
18 Apr 2022
18 Apr 2022 - 22 Apr 2022
75 days
Amount
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar as per entire satisfaction and direction of Engineer-in-charge .
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per entire satisfaction and direction of Engineer-in-charge .
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) as per entire satisfaction and direction of Engineer-in-charge .
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm as per entire satisfaction and direction of Engineer-in-charge .
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles above 25 mm and up to 40 mm as per entire satisfaction and direction of Engineer-in-charge .
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)as per entire satisfaction and direction of Engineer-in-charge .
Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ) as per entire satisfaction and direction of Engineer-in-charge .
Edges of slabs and breaks in floors and walls Under 20 cm wide as per entire satisfaction and direction of Engineer-in-charge .
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm as per entire satisfaction and direction of Engineer-in-charge .
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work as per entire satisfaction and direction of Engineer-in-charge .
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) as per entire satisfaction and direction of Engineer-in-charge .
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) as per entire satisfaction and direction of Engineer-in-charge .
Providing and applying plaster of paris putty of 2 mm thickness over as per entire satisfaction and direction of Engineer-in-charge . plastered surface to prepare the surface even and smooth complete.
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal dia as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler 110 mm as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler Single tee without door 75x75x75 mm as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler Single tee without door110x110x110 mm as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler Single tee without door 75 mm bend° as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler Single tee without door 110 mm bend as per entire satisfaction and direction of Engineer-in-charge .
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete as per entire satisfaction and direction of Engineer-in-charge .
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings Counter sunk Wash basin (550 mm X 450 mm) as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing of Nahani Trap 75mm X 110mm as per entire satisfaction and direction of Engineer-in-charge .
Providing and fixing of Nahani Trap 110mm X 110mm as per entire satisfaction and direction of Engineer-in-charge .
Jaswant Singh
Mansih Kapoor
Sunny Rana
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_720206.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .