REPAIR AND PAINTING OF STEEL/WOODEN FURNITURE FOR

Amount

Sch "A" Part I (REPAIR AND PAINTING TO WOODEN FURNITURE -MASIMPUR) Dismantling of the worn out unsv parts of the following wooden furniture and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Bed Hard (FD-246) Legs (head rest side)(1st Class Teak wood)

Legs(foot rest side)(1st Class Teak wood)

Long Rail

Short Rail

Head Rest Complete

Foot Rest Complete

Top with 12 mm thick ply wood BWR grade IS-303 (Size 1974mmx824mm)

Stiffner of size 40x60x900mm

Supply and fixing of 3.5mm thick one side teak face plywood

Supply and fixing of half round teak wood beading

Bed Hard double (box type)(FD-1120)

Head rest (25mm thick exterior grade prelaminated partcle board)

Foot rest (25mm thick exterior grade prelaminated partcle board)

Sides of 25mm thick exterior grade prelaminated partcle board

Bottom of 9 mm thick exterior grade particle board

Top of 12 mm thick

Mattress of size 1900x900x100 mm 32 density duly covered with cotton cloth(approved colour)

Bed Hard (Single) (FD-1102)

(i) teak wood beading 40x40 mm (made to shape)

(i) Head rest (25mm thick exterior grade prelaminated partcle board)

(ii) Foot rest (25mm thick exterior grade prelaminated particle board)

(iii) Sides of 25mm thick exteriior grade prelaminated particle board

(v) Top of 12 mm thick particle board (Size 1974mmx824mm)

(vi) Mattress of size 1900x900x100 mm 32 density duly covered with cotton cloth(approved colour)

Book case wooden( FD-237)

Legs made out of teak wood.

Long rail of 2nd class hard wood (of leg frame)

Short rail of 2nd class hard wood(of leg frame)

Back side 6 mm thick BWR grade plywood

Top 18 mm thick Pre-laminated particle board .

Both side /bottom/partition made out of 18 mm thick Pre-laminated particle Board.

Shelf made out of 18 mm thick Pre-laminated particle board with 6 mm thick wooden beading in front

Shutter made out of 18 mm Pre-laminated particle board commercial with 4 mm thick wooden beading all round with CP knob to be provided.

CP Knob

Chair wooden Bottom W/O Arms (FD-225)

Front leg

Rear Leg

Rail (Any side of Seat frame )

Stiffener

Back Rest

Seat ply made of 6 mm thick ply wood BWR grade having perforations

Chair Easy(FD-229,FD-1108)

Front Leg

Rear Legs

Front/back rail of Seat frame

Side rail of seat frame

Lower/Upper rail of back rest

Side rail of back rest

Arms rest

Chair Dining JCO/Ors

(i) Seat made of PVC sheet(4mm thick)

Chair Dining /Chair dining (FD-228,FD-279)

Front Leg

Rear Legs

Front rail of Seat frame

Back rails of seat frame

Side rails of seat frame

Back rest

Stiffiner

Chair Dining Offrs(FD/MAP-II/04)

Front Leg

Rear Legs

Front rail of Seat frame

Back rails of seat frame

Side rails of seat frame

Seat ply of 12 mm

Stiffiner

75 mm thick 40 density foam with duly covered by tepastiy cloth/letherite meterials (not less then Rs.250/- per meter) for seat

Chair writing (FD-280)

Front legs

Rear legs

Front rail of seat frame

Rear rail of seat frame

Side rail of seat frame

Back rail of back seat

Stiffiner

Arms Rest

Table 3'x2' with Drawer/WO Drawer (FD-283)

Legs made out of teak wood

Side rail

Front Rail (with drawer)

Front rail/rear rail (Long)

Drawer complete with 2nd class hard wood and bottom 6 mm ply wood BWR grade

Stiffiner

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Table 3'x3' wooden(FD-291)

Legs made out of teak wood

Rail of any side

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Table Writing (FD-275)

Legs made out of teak wood.

Side Rails

Front Rails

Stiffiner (Short Side)

Long stiffiner in between both side stiffiner

Cabinet Side of table made out of 18/19 mm MDF board comm ercial with 1mm thick laminated sheet

Cabinet back side with 6 mm ply wood commercial

Cabinet bottom of 19 mm thick MDF board.comercial

Cabinet bottom legs of 2nd class hard wood

Cabinet front shutter made of 19 mm thick MDF board commercial with 1 mm thick laminated sheet with 50 mm hinges and drawer locks(ISI mark)

Drawer sides made out of with 2nd class hard wood with bottom 6 mm thick ply wood commercial with CP Knobs in front and locking arrangement.

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Table Dining 6 Pers(FD-239)

Legs made out of teak wood.

Side rail

Long rail

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Table Dining 8 Pers(FD-239)

Legs made out of teak wood.

Side Rail Long

Side rail short

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Table Centre FD274&235)

Legs made out of teak wood.

Side Rail Long

Side rail short

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

TeapoyFD232&278)

Legs made out of teak wood.

Side Rail Long

Side Rail Short

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Peg Table (FD277&384)

Legs made out of teak wood.

Side Rail Long

Side Rail Short

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Side Board(FD241)

Legs made out of teak wood.

Long rail of 2nd class hard wood

Short rail of 2nd class hard wood

Back side 6 mm commercial ply

Top 18 mm thick Pre-laminated particle board .

Both side /bottom/partition made out of 18 mm thick Pre-laminated particle Board.

Shelf made out of 18 mm thick Pre-laminated particle board with 6 mm thick wooden beading in front

Shutter made out of 18 mm Pre-laminated particle board commercial with 4 mm thick wooden beading all round with CP knob to be provided.

Drawer complete with 2nd class hard wood and bottom 6 mm thick ply wood connected with CP knobs in front.

Table dressing Gents with Mirror(FD230)

Top made out of 12 mm thick Pre-laminated particle board.

Bottom 12 mm thick Pre-laminated particle board comercial

Back made out of 12 mm thick ply wood comercial

Side and partition made out of 12 mm thick Pre-laminated particle board .

Drawer made out of 12 mm thick plywood with one Nos CP knob in front.

Mirror of size 760 x 380 x 5mm,Make-saint Gobain/Modi Guard

Mirror frame made out of 2nd class hard wood with 6 mm thick ply wood commercial for back with 2 nos key place for hanging

Table dressing Ladies with Mirror(FD251)

Long rails

Short rails

Top 18 mm thick Pre-laminated particle board with 1 mm thick plastic laminated sheet and 4 mm thick wooden beading in front..

Bottom/ partition made of 18 mm thick Pre-laminated particle board comercial with 6 mm thick wooden beading.

Side of 18 mm thick pre-laminated particle board with 4 mm thick wooden beading.

Back 12 mm thick ply BWR

Mirror size 1220 mm x 366 mm x 5 mm thick ,Make-Saint Gobain/Modi Guard

Mirror Frame of hard wood with 6 mm thick ply commercial in back.

Sliding glass 300x300x6mm thick with aluminium Channel complete

Drawer made out of 12 mm thick plywood with one number CP knob in front.

Removing of old existing polish with sand paper and making smooth surfaces and apply two coats of french polish upto glossy finish for the following wooden furniture on specified on drawing and as directed by engineer-in-charge.

Bed Hard

Book case wooden

Chair WB W/O Arms

Chair Easy

Chair Dining

Chair dining offrs with cushion

Chair Writing

Table 3'x2' with Drawer/WO Drawer

Table 3'x3' wooden (900x900x760 mm)

Table Writing

Table dining 6/8 Pers

Table Centre

Teapoy

Peg Table

Side Board

Table dressing Gents

Table dressing Ladies

Sofa set 5 seater

Sofa set 4 seater

Removing of old worn out UNSV cane from various type of furnitures and re-canning the same with new plastic white cane of 2 mm for canning and 4 mm wide half round for beading. Canning shall be done as per godrej pattern.

Replacement of old UNSV cushion with new cushion foam 530x560x100mm thick 40 density rubber foam duly covered with marking cloth & Tapestry cloth(as approved by GE)having one side long chain with double interlocking.Cost of tapestry cloth not less than Rs 250/- per meter.(Make of foam-Sleepwell/kurlon)

Supply of new cushoin cover to fit into cushion foam of Size 530x560x100mm thick 40 Density (Tapestry cloth as approved by GE) having one side long chain with double interlocking. Cost of tapestry not less than Rs 250 per meter.

Sch "A" Part II (REPAIR AND PAINTING OF STEEL FURNITURE -MASIMPUR) Removing old Worn out parts of following steel furniture and replacing the same with new one for the following steel furniture as specified on drawing and as directed by Engr-in-Charge.

Almirah Medium Steel with Shelves (FD-1032)

Shutter (Single Leaf)

Chromium Plate handle

Locking device

Lock with duplicate Key

Cleat of angle iron for fixing of shelves

Shelves made out of 1 mm thick PBI Sheet

Almirah Large Steel with Shelves (FD-1031)

Shutter (Single Leaf)

Chromium Plate handle

Locking device

Lock with duplicate Key

Cleat of angle iron for fixing of shelves

Shelves made out of 1 mm thick PBI Sheet

Book case steel(FD-1028)

3 mm thick Glass pane to be fixed to sliding shutter

CP Handle

Lock with duplicate Key

Shelves made out of 1 mm thick PBI Sheet

Charpoy IP with hard top (FD/MAP-II/01)

Plywood 12 mm thick BWR grade commercial conforming to IS specification 303-1989

Charpoy GI Pipe with plytop(FD-220)

Plywood 12 mm thick BWR grade conforming to IS specification 303-1989

Supply and fixing of GI Elbow 3 Way 32mm ISI Marked by replacing UNSV GI elbow

Supply and fixing of Check Nut by replacing UNSV check nut

Supply and fixing of Med gde GI Long Rail of 32 mm bore of length 1980mm (Make: Jindal/Bansal/TATA) by replacing UNSV long rail

Cutting UNSV Long Rail obtained at Ser 30.04 into two Short Rail with threading and fixing by replacing the UNSV short rail

Cutting UNSV Short Rails obtained at Ser No 30.05 into legs with threading and fixing by replacing the UNSV legs

fixing of MS Clamps duly welded on legs as directed

Supply and fixing of new legs made of 32 mm bore medium gde GI pipe by replacing unsv legs

Chair CB Steel Without Arms (FD-75M)

Providing MS flat Iron Cleat of size 50mmx60mm

Replacement of Chair frame

Seat frame duly canned as per Godrej Pattern, Cane shall be 2mm wide and 0.4 mm thick.

Back rest duly canned as per Godrej pattern, cane shall be 2mm wide and 0.4mm thick

Hard rubber shoes ( set of 4 Nos) at bottom

Chair CB Steel With Arms (FD-75M)

Providing MS flat Iron Cleat of size 50mmx60mm

Repair to Chair frame by cutting and welding with proper size MS tube of length not exceeding 10 cm

Seat frame duly canned as per Godrej pattern, Cane shall be 2mm wide and 0.4 mm thick.

Back rest duly canned as per Godrej pattern, cane shall be 2mm wide and 0.4mm thick

Arm Rest of size 420x50x20 mm

Hard rubber shoes (Set of 4 Nos) at bottom

Chair Varandah(FD-256)

Repair to Chair frame /back frame by cutting and welding not exceeding 20 cm long.

Hard rubber shoe (Set of 4 Nos) at bottom

Scraping cleaning and painting with Synthetic Enamel white paint

Removing of Old worn out UNSV cane and refixing the same with new plastic cane of 4 mm to 4.5 wide half round 0.5 thick for caning. Caning shall be done as per "Godrej Patern

10 mm MS round bar rod duly welded as per drg

Table dining OR(FD-165M)

Leg/frame 25 mm Sq tube upto 100 cm

Hard rubber shoes at bottom (set of 4 Nos)

Table top of size 1900mm x 685 mm made out of 18/19 mm thick pre-laminated particle board (one side decorated face and other side balancing white).Rest all as shown on drg.

Table Office Clerk Steel(FD-84M&FD-1004)

Chromium plated D handle

Lock for drawer and shutter with duplicate Keys(7 Levers)

Drawer made of 1 mm thick PBI Sheet

Repair to side of drawer including angle channel and locking device

Hard rubber shoes (Set of 4 Nos) at bottom of each table.

Table top made out of 18/19 mm thick pre-laminated particle board (one side teak face and other side balancing white).Rest all as shown on drg.

Table Office Officer Steel(FD-84M&FD-1003)

Chromium plated D handle

Lock for drawer and shutter with duplicate Key(7 Lever)

Drawer made of 1 mm thick PBI Sheet

Repair to side of drawer including angle channel and locking device

Hard rubber shoes (set of 4 Nos) at bottom of each table.

Table top made out of 18/19 mm thick pre-laminated particle board (one side teak face and other side balancing white).Rest all as shown on drg.

Table bed side Steel(FD-133M&FD-157M)

Legs 25 mm Square tube

Fixing of old serviceable shutter with fixing hinges

Replacement of UNSV Shutter

Repair of bottom side/ back/ top of cabinet

Table top made out of 18/19 mm thick pre-laminated particle board (both side balancing white).Rest all as shown on drg.

Repainting with two coats of Synthetic Enamel paint white after removal of existing paint after preparation of smooth surface.

Rack Steel 6 tier/Rack adjustable steel 6 tier(FD-106M&FD-1038)

Repair to frame with proper size of MS angle iron of size 40mmx40mmx6mm.

Top, Bottom & Shelves with 1 mm thick PBI sheet

Table typist steel(FD-84 &FD-1006)

Chromium plated D handle

Lock for drawer and shutter with duplicate Key( 7 Levers)

Drawer made of 1 mm thick PBI Sheet

Repair to side of drawer including angle channel and locking device

Hard rubber cap (Set of 4 Nos) at bottom of each table.

Table top made out of 18/19 mm thick pre-laminated particle board (one side teak face and other side balancing white).Rest all as shown on drg.

Chair Revolving(TP)

Hydraulic spring and Jack.

Wheel

Leg Base

Table bed side (FD/E6/MAP/15R)

Top/side/bottom of 18mm thick Pre-laminated particle board one side teak and other side balancing white (PVC edging where applicable)

CP handle to be provided to both the drawers

Steel Runner channel of size 25mm x 450 mm to be provided to both the drawers (fixed at the center of the drawers)

12 mm thick plywood

6 mm thick plywood

Locker steel(FD-1029)

Shutter (Single Leaf)

Chromium Plate handle

Hasp & staple

Shelves made out of 1 mm thick PBI Sheet

20mm dia conduit pipe

Table steel 900x900x760 mm(FD-1009)

Table top made out of 18/19 mm thick pre-laminated particle board (one side teak face and other side balancing white).Rest all as shown on drg.

Table with drawer steel 900x600x760 mm(FD-1008)

Table top made out of 18/19 mm thick pre-laminated particle board (one side teak face and other side balancing white).Rest all as shown on drg.

Teapoy verandah(FD-225)

Table top made out of 18/19 mm thick pre-laminated particle board (one side teak face and other side balancing white).Rest all as shown on drg.

Scartching of old existing paint from inside and outside by rubbing with sand paper and making smooth surface and applying 2 coats of synthetic enamel paint of approved colour shade for the following steel furniture as specified on drawing and as directed by Engr-in-Charge.

Almirah medium steel with shelves (FD-1032)

Almirah large steel with shelves (FD-1031)

Chair CB steel without Arms(FD-1075M)

Chair CB Steel with Arms (FD-75M)

Table dining OR (FD-165M)

Table Office Clerk Steel (FD-84M)(FD-1004)

Table Office Officer Steel(FD-84M)(FD-1003)

Table typist Steel(FD-84M)(FD-1006)

Locker steel(FD-1029)

Rack steel 6 tier/Rack adjustable steel 6 Tier(FD-106M)(FD-1038)

Steel stool 2" height (FD-81M)

Almirah large steel 1/2 H x 1/2 S (FD-114M)(FD-1033)

Table bed side (FD/E6/MAP/15R)

Charpoy IP with hard top(FD/MAP-II/01)

Teapoy verandah (FD-225)

Sch "A" Part III (REPAIR AND PAINTING OF WOODEN AND STEEL FURNITURE -VAIRENGTE & AIZWAL) Dismantling of the worn out unsv parts of the following wooden furniture and replace the same with new one duly polished all as shown on drg and as directed by Engr - in-Charge :-

Bed Hard(FD-246)

Legs (head rest side)

Legs(foot rest side)

Long Rail

Short Rail

Head Rest Complete

Foot Rest Complete

Top with 12 mm thick ply wood BWR grade IS-303(1900mmx900mm)

Stiffner of size 40x60x900mm

Supply and fixing of 3.5mm thick one side thick face plywood

Supply and fixing of half round teakwood beading

Bed Hard (Single) (FD-1102)

Teak wood beading 40x40 mmx6mm (made to shape)

Head rest (25mm thick exterior grade prelaminated partcle board)

Foot rest (25mm thick exterior grade prelaminated partcle board)(one side teak face and other side balancing white)

Sides of 25mm thick exteriior grade prelaminated particle board (one side teak face and other side balancing white)

Top of 12 mm thick particle board

Mattress of size 1900x900x100 mm 32 density duly covered with cotton cloth(approved colour)

Bed hard plytop Size 1974mmx824mm (FD/E6/MAP/08)

Top with 12 mm thick ply wood BWR grade IS-303

Pre laminated particle board (one side teak face and other side balancing white) fixed at head rest

Pre laminated particle board (one side teak face and other side balancing white) fixed at foot rest

Book case wooden(FD-237)

Legs made out of teak wood.

Long rail of 2nd class hard wood (of leg frame)

Short rail of 2nd class hard wood(of leg frame)

Back side 6 mm thick BWR grade plywood

Top 18 mm thick Pre-laminated particle board .

Both side /bottom/partition made out of 18 mm thick Pre-laminated particle Board (one side teak face and other side balancing white).

Shelf made out of 18 mm thick Pre-laminated particle board (one side teak face and other side balancing white) with 6 mm thick wooden beading in front

Shutter made out of 18 mm Pre-laminated particle board (one side teak face and other side balancing white) with 4 mm thick wooden beading all round with CP knob to be provided.

CP Knob

Chair Easy(FD-229 & FD-1108)

Front Leg

Rear Legs

Front/back rail of Seat frame

Side rail of seat frame

Lower/Upper rail of back rest

Side rail of back rest

Arms rest

Chair Dining (FD-228 &FD-279)

Front Leg

Rear Legs

Front rail of Seat frame

Back rails of seat frame

(v) Side rails of seat frame

Back rest

Stiffiner

Chair Dining Offrs(FD/MAP-II/04)

Front Leg

Rear Legs

Front rail of Seat frame

Back rails of seat frame

Side rails of seat frame

Seat made of 12 mm thick BWR Ply

Stiffiner

75 mm thick 40 density foam with duly covered by tepastiy cloth/letherite meterials (not less then Rs.250/- per meter) for seat

Chair writing (FD-280)

Front legs

Rear legs

Front rail of seat frame

Rear rail of seat frame

Side rail of seat frame

Back rail of back seat

Stiffiner

Arms Rest

Table 3'x2' with Drawer/WO Drawer (FD-283)

Legs made out of teak wood

Side rail

Front Rail (with drawer)

Front rail/rear rail (without drawer)

Drawer complete with 2nd class hard wood and bottom 6 mm ply wood BWR grade

Stiffiner

Top made out of 18/19 mm thick pre-laminated Particle board (one side teak face and other side balancing white) with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Table 3'x3' wooden(FD-291)

Legs made out of teak wood

Rail of any side

Top made out of 18/19 mm thick pre-laminated Particle board (one side teak face and other side balancing white) with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Table Writing (FD-275)

Legs made out of teak wood.(Long)

Side Rails

Front Rails

Stiffiner (Short Side)

Long stiffiner in between both side stiffiner

Cabinet Side of table made out of 18/19 mm MDF/Particle board commercial with 1mm thick laminated sheet

Cabinet back side with 6 mm ply wood commercial

Cabinet bottom of 19 mm thick MDF/Partilce board.comercial

Cabinet bottom legs of 2nd class hard wood

Cabinet front shutter made of 19 mm thick MDF/particle board commercial with 1 mm thick laminated sheet with 50 mm hinges and drawer locks(ISI mark)

Drawer sides made out of with 2nd class hard wood with bottom 6 mm thick ply wood commercial with CP Knobs in front and locking arrangement.

Top made out of 18/19 mm thick pre-laminated Particle board (one side teak face and other side balancing white) with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Table Dining 6 Pers(FD-239)

Legs made out of teak wood.

Side rail

Long rail

Top made out of 18/19 mm thick pre-laminated Particle board (one side teak face and other side balancing white) with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Table Centre (FD-274&FD-235)

Legs made out of teak wood.

Side Rail Long

Side rail short

Top made out of 18/19 mm thick pre-laminated Particle board (one side teak face and other side balancing white) with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Teapoy(FD-232&FD-278)

Legs made out of teak wood.

Side Rail Long

Side Rail Short

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Peg Table (FD-277&FD-384)

Legs made out of teak wood.

Side Rail Long

Side Rail Short

Top made out of 18/19 mm thick pre-laminated Particle board (one side teak face and other side balancing white) with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Table dressing Ladies with Mirror(FD-251)

(i) Legs

Long rails

Short rails

Top 18 mm thick Pre-laminated particle board (one side teak face and other side balancing white) with 1 mm thick plastic laminated sheet and 4 mm thick wooden beading in front..

Bottom/ partition made of 18 mm thick Pre-laminated particle board (one side teak face and other side balancing white) comercial with 6 mm thick wooden beading.

Side of 18 mm thick pre-laminated particle board with 4 mm thick wooden beading.

Back made out of 12 mm thick ply BWR

Mirror size 1220 mm x 366 mm x 5 mm thick ,Make-Saint Gobain/Modi Guard

Mirror Frame of hard wood with 6 mm thick ply commercial in back.

Sliding glass 300x300x6mm thick with almn Channel complete

Drawer made out of 12 mm thick plywood

CP knob

Removing of old existing polish by washing with caustic soda and rubbing with sand paper and making smooth surfaces and apply two coats of french polish upto glossy finish for the following wooden furniture on specified on drawing and as directed by engineer-in-charge.

Bed Hard(FD-246)

Book case wooden(FD-237)

Chair WB W/O Arms (FD-225)

Chair Easy(FD-229&FD-1108)

Chair Dining (FD-278&FD-228)

Chair dining offrs with cushion(FD/MAP-II/04

Chair Writing (FD-280)

Table 3'x2' with Drawer/WO Drawer (FD-224&FD-231)

Table 3'x3' wooden (900x900x760 mm) (FD-283)

Table Writing(FD-275)

Table dining 6/8 Pers(FD-239)

Table Centre (FD-235&FD-274)

Teapoy(FD-232&FD-278)

Peg Table(FD-277&FD-384)

Side Board(FD-241)

Table dressing Gents(FD-230)

Table dressing Ladies (FD-251)

Sofa set 5 seater(FD-281&FD/E6/MAP-II/02)

Sofa set 4 seater(FD-1032)(FD-281&FD/E6/MAP-II/02)

Removing of old worn out UNSV cane from various type of furnitures and re-canning the same with new plastic white cane of 2 mm for canning and 4 mm wide half round for beading. Canning shall be done as per godrej pattern.(FD-279&FD-229,FD-280)

Replacement of old UNSV cushion with new cushion foam 530x560x100mm thick 40 density rubber foam duly covered with marking cloth & Tapestry cloth(as approved by GE)having one side long chain with double interlocking.Cost of tapestry cloth not less than Rs 250/- per meter.(Make of foam-Sleepwell/kurlon)(FD-281)

Supply of new cushoin cover to fit into cushion foam of Size 530x560x100mm thick 40 Density (Tapestry cloth as approved by GE) having one side long chain with double interlocking. Cost of tapestry not less than Rs 250 per meter(FD-281).

Charpoy GI pipe with plytop(FD-220)

plywood 12 mm thick BWR grade commercial conforming to IS specification 303-1989

Charpoy IP with hard top(FD/MAP-II/01)

(i) plywood 12 mm thick BWR grade commercial conforming to IS specification 303-1989

Almirah large/medium Steel with Shelves (FD1031'FD-1032)

Lock with duplicate key

CP handle

Chair verandah(FD-256)

Removing of Old worn out UNSV cane. Scraping cleaning and painting with SE white paint And replace the UNSV cane with new plastic cane of 4 mm to 4.5 wide half round 0.5 thick for caning. Caning shall be make on "Godrej Patern. Four Nos of rubber shoes is to be provided for each chair

Scratching of old existing paint from inside and outside by rubbing with sand paper and making smooth surface and applying 2 coats of synthetic enamel paint of approved colour shade for the following steel furniture as specified on drawing and as directed by Engr-in-Charge.

Almirah large Steel with Shelves (FD-1031)

Almirah medium Steel with Shelves (FD-1032)

Locker steel(FD-1029)

Table office clerk steel(FD-84M)

Table office officers steel(FD-84M)

RK STEEL FABRICATORs

M/S TAPAN KUMAR RAY