Providing & Erecting 7 Mtrs Street light Octagonal pole pol under Botad Nagarpalika GMFB Grant

Name of work:- Providing & Erecting Street Lighting in BHAVNGR ROAD DAIMAND RESYDENSY ROAD

Estimated Cost RS.382,415.00

Item No.& Description QTY Rate. Per Amount

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated

with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend

local wind speed with integral Junction box consist of terminal plate of

min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to

be erected With Suitable foundation (Included) as per details given by

manufacturer considering site requirement.

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with

225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm long J- 9 12429 No.

Bolt.Approx Pole weight 67 kg

Supplying and erecting street light pole bracket comprising main B Class

GI pipe of 4.2 cm/require outside dia. complete with suitable B Class GI

sleeve tubing of approx. 45cms.length and suitable for 76.5mm/80mm or

require size pole top having sufficient fastners for fixing the brackets and

having suitable rise as per site condition as directed and spread of

mtr.with suitable welded stiffener reducer and with lock nut complete

painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. Suitable for side entry fitting brackets of following

[B] Double Arm Bracket 2 Mtr. 9 1215 No.

Supplying & erecting XLPE(IS:7098)(l)-88 ISI unarmoured copper cable

1.1 KV grade to be erected as directed of folloving size.

(E) 3 core 2.5 sq.mm 9 X 9 x 2.0 = 162+8 mt extra = 170 170 Mtr.

providing and erecting Cast iron earth plate size 30 X 30 X 0.35 cms.

buried in specially prepared 2.5 Mtr. deep earth pit complete with

necessary G.I. strip in G.I. pipe 2 Mtr. long with coupling and G.I. plug for 4 679 No.

earthing of switch gear, conduit run or power plug etc. ( No Of

earthplate per three poles is one) = 8/3 =4 nos + 01 nos =

For using salt and charcoal / coke as required for pipe type earthing. 4 170 No.

Providing and erecting Annealed bare Copper wire 4.064mm to

1.626mm.8 to 16 S.W.G.(nos of earthplate 2.5 kg = x 2.5 kg = 10kg) 10 787 Kg.

Providing and erecting XLPE (IS:7098) (l)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 kv to be laid on wall with

necessary clamps or in exiting trench/pipe of following size of cables

(C) 3 core 6 Sq. mm 200 127 Mtr.

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection.

(iii) 60 - 89 watts cat-lll LED fittings 18 5030 No.

providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing 18 295 No.

box. confirming to IS 8828/1996 with ISI Mark

Solderless crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts 80 6 No.

in an approved manner. (B) 10 Sq.mm Complete erected.Connection

lugs = 1 pole provide 8 nos = 9x 8 =72+08 =80 nos

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

(A) 50 mm outer dia 250 62 Mtr.

Making trench in soft soil of suitable width of 90 cm deep for laying

cable or locating the fault all over the run and back filling the same and 180 55 Mtr.

making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cms or

required depth for laying any size of cable or locating the fault all over

the run and back filling the same and making the surface as normal

(B) if additional machineries like hammer driller or JCB use [Add] 20 354 Mtr.

1% LABOUR CESS…

Total Amounts Rs.

Total Amounts Rs.

Wiremen Engineer Chief officer

Botad Nagarpalika Botad Nagarpalika Botad Nagarpalika