S/I/T/C OF HIGH MAST AND S/F POLE LED LIGHT CABLING WORK

S/F of 16mtr high mast shaft of approved make with rising system, hot dip Galvanized inside & outside dip having pole sheet thickness 3mm top dia minimum 150mm bottom dia minimum 310mm base plate 25mm. thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes, 1.5 HP power tool motor, 3 point suspension with steel wire roop 6mm dia double drum winch. including making suitable foundation as per manufacture drawing & site reqirement along with foundation bolts nuts washers, anchors plates etc. complete in all respect as per direction and satisfaction to the Engineer in charge. 21.3.1

S/F of twin unit aviation obstruction light (GEC–ZH 750) / Bajaj BJAOL –1 with transformer and neon spiral etc. complete in all respect, at the top of the building complete in all respect. CAT-AA 409

S/F of following capacity of automatic street light cubical control panel paintd with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractor, HRC fuse,isolating switch metering instrument & instrument box with CTs etc.in case of TPN,complete in all respect. 25A TPN 807 e ii

Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) 725 B

S/F of factory wired integral LED flood light luminaries with die cast aluminum housing build with toughend glass UV stabilized PC cover and lenses built with mandatory driver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect including labour 23.26

S&L of 25mm x 3mm G.I. Strip from earth electrodedirectly in the ground as requried complete in all respact 716

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade in existing masonary open duck as directed by Engineer- In charge complete in all respect inculding axcavation and rifling . The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 16sq mm 4 core 20e.1.9

(b) 6sqmm 2 core 20e.1.1

S/F of GI pipe 100mm dia DSR 18.14.13.3

Supply and fixing of LED Street light Fitting with mandatory dirver set having die cast aluminium body with tougbend glass UV stabilized PC cover and lenses suitable for 110 to 130 Watt. Confirming to IP 65 and above Protection complete in all respect. 23.17

Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. 634

Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-36 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respects. 616

S/F of 63 AMP. 415 volts metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle irorn bracket in all respact 327 cat B