Anganwadi Thadiyamparambu Ward 12

Amount

construction of anganwadi

Stone Masonry work

Through and bond stone size 24 x 24 x 39cm

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Coarse sand (zone III)

Portland Cement

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Stone for masonry work

Wall form panel 1250x500xmm

Corner angle 45x45x5 mm 2.50 long

100mm Channel shoulder 2.5m long

Double clip(Bridge clip)

M.S Tube 40mm dia

Wall form panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 long

Column clamp 450x1070 mm

Prop 2 m (2-3.5m)

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable span ESO+SI (2.35-3.40)

Adjustable telescopic prop 3 m (2.02- 3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Second class kail wood in planks

Hollock ballies 125mm diameter

Stone Aggregate(single size): 10 mm nominal size

Laterite stone of size 35x20x20cm

Twisted steel/deformed bars

Plasticizer/super plasticizer

Production cost of concrete by batch mix plant

Pumping charges of concrete including Hire charges of pumping work & accessories etc

Bright finished or black enameled mild steel butt hinges 75x47x1.70mm

Fine sand (zone IV)

Multi surface paint

Spacial primar

Mild steel round bar above 12mm dia

Flat up to 10mm in thickness

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Plastic emulsion paint

Synthetic enamel paint in black or chocolate shade

Vitrified floor tile 60x60 cm

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

24mm Thick fatory made shutters with styles,rails and panneles of PVC extruded section in white ,grey or wooden finish

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Polyethylene water storage tank with cover and suitable locking arrangemnet

Vitreous China orrisa type w.c. pan size 580 mm

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

100 mm S.C.I. trap with vent heel

Vitreous China flat back wash basin 550x400 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Brass bib-cock-15 mm dia

PVC pipe 110 mm outer dia 6kgf/cm2

PVC pipe 25 mm outer dia. 10kgf cm2

PVC pipe 32 mm outer dia. 10Kgf/cm2

PVC 20 mm dia holding down bolts

PVC pipe 32 mm outer dia. 10Kgf/cm2

Stone aggrigate 0.6mm nominal size

Interlocking c.c Paver block (60mm thick M-30)

Sundries

Bidder Name

KUTTIALI K