Electrical work to be carried out at various lift irrigation schemes of MISD Baramulla.

Amount

a. Trimming / Branch cutting of trees across H.T/L.T of lift irrigation scheme Azadpora with the help of Skilled /Manual labour, ladder, cutter machine, axe, etc. for the completion of work. b. The job also includes the charge for tighting of loose ACSR on poles wherever required for the completion of work.

Repairs to 200 HP ATS starter of lift irrigation scheme Sheeri-II by way of providing, fitting & setting of new electro pneumatic timing relay with timing range upto 60s coil voltage 415V.(2NO 2NC double block)

Complete servicing /maintenance of 400HP ATS Starter of lift irrigation scheme Ijara unit no.02 by way of removing of accumulated carbon from contact points of all contactor by applying carbon tetra chloride active chemical to make the surface clean. Adjustment of all protection devices, removing of dirt, dust and other greasy substance with the help of highly volatile thinner/acetone and blowing of compressed air inside the starter compartment. The job also includes providing, fitting & setting of new electro pneumatic timing relay with timing range upto 60s coil voltage 415V.(2NO 2NC double block) for one starter. The job includes the charge for p/f LED phase indicator with surge protection of reputed make (3no). The job also includes the charge for replacement of push button (ON/OFF) with new one for the completion of work. The job also includes the charge for providing of brass bolts with nuts as per sample for incoming and outgoing connections for ATS (3kg) & filling of T- oil thirty Ltr for topping to starters two no’s.

Providing of brass Nuts & bolts for Bakelite connection plate of ATS starters of lift irrigation scheme Zehanpora, Ijara, Manzgam, Gantamulla, Uranbow.

Repairs to 400HP Starter at L.I.S Seer unit no.03 by way of: Disconnecting of fully automatic Autotransformer Starter from the main circuit, then dismantling of damaged part from the starter which comprises of following:- a) Isolating and disconnecting of all incoming and outgoing leads from auto transformer starter. Draining out transformer oil from the oil tank and collecting in a suitable container taking out damaged auto transformer coil assembly from oil tank at site. Providing and fitting of new auto transformer coil fabricated out of copper wire of standard size and quality (03 legs @ 13.5 kg/leg approximately= 40.5 kg).Providing, fitting of insulation material such as cardboard, latheride paper, cotton tape, PVC paper, varnishing, nuts and bolts etc. Replacement of damaged brass bolts with nuts as per sample of incoming and outgoing connections. Reassembling of auto coil at site by way of fitment of coils, core piece and after proper cleaning, clamping channels, nuts, bolts, soldering of connections and testing it on full load at site. The job also includes the charge of, skilled labous and other tools & tackles for the completion of work. Deducting cost of scrap of the total value of copper. (i.e. 38.4). The job also includes the charge for filling of fresh T-oil for topping (35 Ltr) to all starters at site.

M/s Sopore Engineering Works