Loading…
Loading…
Tender Value
₹17.5 L
EMD Value
₹17,514
Closing Date
20 May 2026, 4:00 pmClosed
Executive Engineer, RWS&S Kadapa
Kadapa
Providing of Water Tank in Mudumala GP Siddayagarimattam Temple of B.Mattam Mandal
929832
Tender Notice No.TO/1-5/2026-27, Dt : 23.04.2026
OPEN - NCB
Water Supply
YSR
12 documents required · 12 mandatory
₹620
₹17,514
5 May 2026
5 May 2026
5 May 2026
Drilling of Bore well by the down the hole hammer drilling to a finished dia of 165 mm in all formations suitable for down the hole hammer drilling such as medium hard rock to hard rock , all consolidated formations etc and reaming the bore to suit inserting of 180 mm dia 6 kg/cm2 UPVC casing pipe,. confirming to IS specifications including insertion of UPVC casing pipe with couplings,caps and any other relevent materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development ( flushing bore at an average pressure of 150 PSI and conducting the yield test and crew charges ,cost of consumables ,transportation charges, all other charges required in fixation of pipe assembly ) completely done to the satisfaction of the department as stipulated in the technical specifications but excluding cost of casing pipe, couplings ,cap etc . The entire work should be carried out as per IS 2800 part I & II 1997 and amendements time to time complete as per ss of APSS upto 90mts
Drilling of Bore well by the down the hole hammer drilling to a finished dia of 165 mm in all formations suitable for down the hole hammer drilling such as medium hard rock to hard rock , all consolidated formations etc and reaming the bore to suit inserting of 180 mm dia 6 kg/cm2 UPVC casing pipe,. confirming to IS specifications including insertion of UPVC casing pipe with couplings,caps and any other relevent materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development ( flushing bore at an average pressure of 150 PSI and conducting the yield test and crew charges ,cost of consumables ,transportation charges, all other charges required in fixation of pipe assembly ) completely done to the satisfaction of the department as stipulated in the technical specifications but excluding cost of casing pipe, couplings ,cap etc . The entire work should be carried out as per IS 2800 part I & II 1997 and amendements time to time complete as per ss of APSS Above 90 mts to upto 150mts
Supply and utilisation of 180 mm dia PVC casing pipe of 6 kg/cm2 for potable water supply confirming to IS 4985/1988 as amended from time to time including revisions if any and confirming to technical conditions and specifications and excluding GST
Geologist Charges
Supply and Transportation of 7.50 HP/12-16 stages, 3 phase 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I. including transportation, but excluding and installation charges and excluding GST
Fabrication , transportation and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets Upto 7.50 HP (1) Voltmeter ; 0-500 V 96x96mm size - 1No Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab (2) 0 to 20 Amps / 0- 50 Amps Ammeter (96x96mm size) - 1No. L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab (3) Single phase preventor of suitable range - 1No.Makes: L&T / Minilec / Powertec. 32 A TP, 10KA MCB. Makes: Legrand / Schneider capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells. (4) 32 A TP, 10KA MCB. - 1No (5) Indication lamps (R-Y-B) with switch control - 1set (6) Voltmeter & Ammeter selector switch - 2 Nos of Supply and fixing of ISI Mark suitable capacitor and excluding GST
Supply and fixing of 50mm dia Nominal Bore GI Pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI Fittings including cost and conveyance of all materials and labour charges etc complete
Supply of 3.0 core 2.50 Sqmm flat copper cable as per IS 694-1990 for submersible motors including cost and conveyance of all materials and labour charges etc complete excluding GST
Supply and fixing of MS Clamp Sets (2 Nos) suitable for 50mm dia Pipe with 8Nos bolts and nuts including cost and conveyance of all materials and labour charges etc complete and excluding GST
Cost of 80mm dia PN 1.6 DI D/F Tilting disc swing check valves slanted seated with maximum swing of 59 degree with metalic, corrosion proof and wear resistant seat faces, Body and Disc of ductile cast iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Euivalent as per IS1865, IS:3896-2 and including transportation 5% etc., complete
Supply and fixing of 180 mm dia Bore Cap including cost and conveyance of all materials and labour charges etc complete and excluding GST
Supply and fixing of 50 mm dia CI Flange sets including cost and conveyance of all materials and labour charges etc complete and excluding GST
Labour charges for (Errection) Installation , Errection , Earthing , Testing and commisioning of submerisble Pump set including pipe connection for suction and delivery and conveaynce of all materials and labour chargs etc complete for 7.50 HP SP Set
Construction of 20 KL Capacity Over Head Service Reservoir with 9.40 mts staging of approved type design with VRCC framed structure M30 grade concrete single compartment inside dia of 5.00 mts & 2.40 mts Height walls the LWL being 0.15 meters above bottom slab, a free board of 0.15mts Below top slab and capable of holding 20,000 lts with salient levels as per departmental plan.The Reservoir should be provided with 2 Nos of D.I.Light type manhole frame with a cover of 600X600mm size RCC ventilator with copper or Stainless steel fly proof mesh with central RCC phenial of 600mm dia, RCC /Aluminium precast ladder 600mm width inside reservoir from floor level to roof level embeded at bottom with concrete as per standard pattern including cost, conveyance of all materials, labour charges and curing with all water leads etc, complete, one no of lighting arrestor of approved pattern with necessary earth connections, One no.of water level indicator of approved pattern,Stainless Steel Hand railing as per drawing at top around the tank
Supply and Fixing of 80 mm dia CI D/F Pipes 2.00 mts long (Rs.47/- Kgs each) Including cost and conveyance of all materials and labour charges etc., complete
Supply and Fixing of 80 mm dia Bell Mouth (Rs.7/- Kgs each) Including cost and conveyance of all materials and labour charges etc., complete
Supply and Fixing of 80 mm dia CI D/F Pipes 0.60 mts long (Rs.19.28/- Kgs each) Including cost and conveyance of all materials and labour charges etc., complete
Supply and Fixing of 80 mm dia CI Tail Piece (Rs.15.58/- Kgs each) Including cost and conveyance of all materials and labour charges etc., complete
Supply and Fixing of 80 mm dia CI 90 degrees bend (Rs.13/- Kgs each) Including cost and conveyance of all materials and labour charges etc., complete
Supply and Fixing of 80 mm dia CI Duck foot bends (Rs.21/- Kgs each) Including cost and conveyance of all materials and labour charges etc., complete
Supply and Fixing of 80 mm dia CI Semicircular bends (Rs.25/- Kgs each) Including cost and conveyance of all materials and labour charges etc., complete
Supply and Fixing of 6 mm thick rubber packing Including cost and conveyance of all materials and labour charges etc., complete
Supply and Fixing of Bolts and Nuts with double washers Including cost and conveyance of all materials and labour charges etc., complete
Supply and delivery of 80mm dia PN 1.6 (Mpa) "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.
Construction of pipeline for water supply with 75 mm dia 6 Kgs./cm2 HDPE pipe line confirming to as per IS : 4984/1995 with its amendments and revisions their on including supply of pipes as per requirements including earth work excavation of trench size 0.70x1.00 Mts. in all soils upto SDR soils using 2/3 machinery and 1/3 manual labour, lowering, laying and jointing of pipes and providing sand cushion 150mm thick true to alignment and gradient and refilling the trenches with excavated soils with watering ramming and removing surplus earth from site of work and filling pipeline with water and testing with required pressure for every 500 Mts etc., complete including cost and conveyance of all materials and labour charges etc complete includung CP excluding GST
Construction of pipeline for water supply with 75 mm dia 6 Kgs./cm2 HDPE pipe line confirming to as per IS : 4984/1995 with its amendments and revisions their on including supply of pipes as per requirements including earth work excavation of trench size 0.70x1.00 Mts. in all soils upto SDR soils using 2/3 machinery and 1/3 manual labour, lowering, laying and jointing of pipes and providing sand cushion 150mm thick true to alignment and gradient and refilling the trenches with excavated soils with watering ramming and removing surplus earth from site of work and filling pipeline with water and testing with required pressure for every 500 Mts etc., complete including cost and conveyance of all materials and labour charges etc complete includung CP excluding GST
Construction of Function Hold Tap Connections (FHTC) on 75mm dia HDPE Pipeline with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 65 to 180mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm dia B class GI pipe as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16.0 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth), and 12.7mm dia Brass Bib cock long body Indian make heavy duty excluding GST and Seigniorge charges, including contractor' profit & overheads @ 13.615%.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
~$Siddaiahgaripalli.xlsx
TENDER_DOCUMENT • 0.00 MB
BOQ.xlsx
TENDER_DOCUMENT • 0.02 MB
Siddaiahgaripalli.xlsx
TENDER_DOCUMENT • 0.07 MB
VOL-1 Part-A.doc
TENDER_DOCUMENT • 0.28 MB
Vol-Part-B.doc
TENDER_DOCUMENT • 0.20 MB
Download all tender documents and submit your bid