SPECIAL REPAIRS TO PERIMETER WALL AT KATARIBAGH AND PROVISION OF KWA WATER SUPPLY CONNECTION AT DHARMBIR ENCLAVE PANAMPILLY NAGAR KOCHI UNDER GE NW KOCHI

Amount

Excavating in trenches n.exc 1.5 m wide and n.exc 1.5m in depth for foundation and getting out in soft/loose soil compleate all as specified and directed by Engr-in-charge.

M & L for Cement concrete Type D2 1:4:8 (40 mm greded Agg regate) as in below pile caps/ plinth beam foundations, filling and mass-concrete compleate all as specified and directed by Engr-in-charge.

Use and waste form work to faces of drain walls, retaining walls, abutments and similar works including attached pillasters, buttresses etc. vertical or to batter for smooth finished surfaces of concrete complete all as specified and as directed by Engr-in-Charge.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shap required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Chrge.

M&L for mild steel TMT bars 5mm to 10mm dia in stirrups, cut to length, bent to shap required including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips compleate all as specified and directed by Engr-in-charge.

M&L for RCC Nominal Mix Type B1 1:2:4 (20 mm graded aggregate) as in foundation, plinth beam compleate all as specified and directed by Engr-in-charge.

All as per item No 6 here in before but for column compleate all as specified and directed by Engr-in-charge.

Use and waste formwork to sides of column for rough finished surfaces of concrete compleate all as specified and directed by Engr-in-charge.

Use and waste form work to Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter compleate all as specified and directed by Engr-in-charge.

M&L for Pre-cast cement concrete block masonry Type B1 1:2:4 (20mm graded aggregate) with solid blocks, Set in cement mortar 1:4 exc. 10 cm in width and setting in mortar compleate all as specified and directed by Engr-in-charge.

M&L for 15mm thick rendering in cement mortar 1:4 on brick or pcc block masonry/concrete surface finished even and fair compleate all as specified and directed by Engr-in-charge.

M&L for preparation of newly Concrete surfaces of wall and applying two coats of cement based paint over a coat of alkali resistance primer compleate all as specified and directed by Engr-in-charge.

Returning , filling in including spreading, levelling watering and well ramming in layers in soil compleate all as specified and directed by Engr-in-charge.

Removing excavated material exc 1.5 Km and n.exc 5 Km and depositing were directed at level compleate all as specified and directed by Engr-in-charge.

S&F MS post and struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. ( for securing wire mesh etc) incl all necessary drilling bolting or revetting etc and similar work compleate all as specified and directed by Engr-in-charge.

M&L for preparation of new steel surfaces and applying two coats of anti corrosive epoxy paint over a coat of appropriate primer compleate all as specified and directed by Engr-in-charge.

S&F MS FI (40mm x 6mm) as in fencing post for securing post with fencing wire mesh including drilling bolting with reqd nuts & bolts and welding with flat of reqd length conforming to Fe-410-0 or Fe-310-0(Nuts and bolts measured separately) incl taking down old serviceable one compleate all as specified and directed by Engr-in-charge.

S&F 5 to 10mm diameter of neck Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed by Engr-in-Charge.

M&L for mild steel round bars 10mm dia and over cut to length, bent to shap required including cranking, bending spirally for hooping for as in line wire for straining fencing and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Chrge.

Supply of MS galvanised chain link fencing of grid size 50x50x3.10mm dia wire (Weight not less than 3.25 Kg/Sqm) including supply and binding with GI binding wire complete all as specified and as directed by Engr-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire compleate all as specified and directed by Engr-in-charge.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles compleate all as specified and directed by Engr-in-charge.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) compleate all as specified and directed by Engr-in-charge.

Supply and laying in trenches / floor or fixed to wall / roof using suitable size MS Clamps duly painted, CPVC pipes Sch 40 and incl Plain CPVC Sch 80 fittings of size 63 mm ID alongwith necessary Leak proof CPVC paste / gum compleate all as specified and directed by Engr-in-charge. Make: Astral / Supreme / Finolex

Supply and fix 63 mm bore hand operated butterfly valve, ISI Marked, of pressure rating not less than 15Kg/cm² flanged type including necessary heavy duty gasket, G I Bolts, G I Nuts, G I Washers etc compleate all as specified and directed by Engr-in-charge. Make: Kartar / Zoloto / Leader

Road cutting/ boring the road to cross the pipe line and making good surface by PCC etc match with existing road surfaces compleate all as specified and directed by Engr-in-charge.

Supply and fix mono block pump set 2 HP motor, 3 Phase, 450 LPM, 415 Volts including necessary PCC foundation, starter-delta starter, with 65 mm inlet and 50 mm outlet, connection from starter to motor compleate all as specified and directed by Engr-in-charge. Make of pump & motor : Kirloskar/KSB/V-Guard.

MS BUILDERS

THOMSONS CONSTRUCTIONS

K.V.GEORGE AND COMPANY

ANIE JOHN CONTRACTORS

St George Engineering Works

Palakkal Agencies