Construction of Public Distribution Shop at Kuppuchipalayam in Vangalkuppuchipalayam

Amount

Name of the Work : Construction of Public Distribution Shop @ Kuppuchipalayam H/O Vangalkuppuchipalayam

Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification

Cement concrete 1:4:8 mix ( one cement four sand and eight aggregate)using 40mm gauge hand broken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specfication

Supplying and erecting , centering shuttering includung conveyance of all materials to worksite and all charges etc complete

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete

Reinforced cement cocrte in 1: 11/2:3 mix using 20mm metal including cost and conveyance of materials to worksote etc complete.

Brick work in cm 1:5 mix(one cement and five sand )using country bricks ground maded of size 23 x 11 x 7 cm including curing,finishing and cost & Conveyance of all materials etc., complete.

Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications.

Supply and Fixing of Cudappah slab including cost and all labour chrges etc.

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 -Part XII with sand cushion and forming the closet using 40mm broken brick jelly in lime concrete flooring alround 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Plastering surfaces of RCC items such as slabs,beams,sunshades with cement mortar 1:3 -10mm thick including packing, providing cement mortar beading for sunshades staircase ,steps, lands slabs etc.,as directed by departmental officers etc, complete complying with standard specifications.

Paving the floor with plain/design ceramic tiles (colour and shade as directed) of size 200 mm x 200mmx6mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement as directed by the departmental officers.etc.

Dadooing of walls with colour glazed tiles of size 300x200x6 mm of best quality and colour lSet in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Providing Granolythic floor finish in cement concrete 1:2:4 mix using 10-12 mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges etc.,

Painting two coats with ready mixed Distembering paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete .

Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete .

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Towards supply of Rolling shutter of size 1.80m x 2.10mx2=7.56M2

Towards supply of steel door of size 0.90 x 1.30 mX2=2.34m2 etc complete

Towards supply of Steel windows of size 0.75 x 0.90m

Towards supply of Ventilators of size 0.90 x 0.45 m

Towards supply of Steel Door of size 0.75 x 1.80m=1.35Sqm

Towards labour charges for fixing of steel Doors & windows in correct position.

Supplying and fixing following electrical arrangement

Wiring with 2 x 1.5 sq.mm(22/0.3) PVC insulated SC. Unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch withpainting of suitable colour for open PVC light point / fan point (For electrical regulator).SD 17

Supply and fixing of 4' 36Watts Flu Fitting complete with Electronic Ballast With TW round Block On Wall or Ceilling With Flu Tube With PVC unsheathed Copper Leads from Terminal to the Tube Light Fiittings (SD 87)

Supply and fixing Of 1200mm (48") Sweep AC Ceiling Fan complete with stepped Electronic 300 W Regulator , with 1m down rod with Fan clamp with side plates and cross arm of size 450mm (18") (SD106)

Wiring with 2 x 1.5 sq.mm(22/0.3) PVC insulated SC. Unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TW switch box for 5A3 pin non inter locking CS plug withpainting of suitable colour with continuous earth wire connection of 14 SWGTC wire for open PVC plug point. (SD 36)

Supply and run of 2x1.5 sqmm (22x0.3) PVC insulated SC unsheathed Cu.Conductor of 1100Vgrade on 7/20 GI Bearer Wire of service connection Mains (SD 64)

Supply and run of 2x1.5 sqmm (22x0.3) PVC insulated SC unsheathed Cu.Conductor of 1100Vgrade in 25mm dia GI pipe (class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD 69) 25MM GI PIPE

Supply and fixing of 4'40Watts Single Street Light Flu Fitting complete withCopper chok and Condesor With 20 mm GI Pipe( CLASS "B") With One number 20 mm GI bend complete on the existing post/ wall with 16 A Aerial Fuse unit on M.S Plate With PVC unsheathed Cu .Leads , With MS clambs With Aluminium painting with Flu Tubes Street Light Fiittings (SD 94)

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Rajakrishnan (BID ID -1220330)