Loading…
Loading…
Tender Value
₹28.4 L
EMD Value
₹28,440
Closing Date
18 May 2026, 6:00 pmClosed
CHIEF OFFICER THARA NAGARPALIKA
Supply and Installation Of Pumping Machinery and Renovation Of MH And House Connection As Per Various Location Chart At, Thara 15th Finance Commission Grant
302951
Thara/2026/May/03
Open
Mechanical Equipment
Banaskantha
1 document required · 1 mandatory
₹1,500
Chief Officer Thara Nagarpalika
₹28,440
8 May 2026
8 May 2026
8 May 2026
18 May 2026
8 May 2026
NAME OF WORK :-SUPPLY & INSTALLATION OF PUMPING MACHINARY & RENOVATION OF MH
AND HOUSE CONNECTION AS PER VARIOUS LOCATION CHART AT, THARA
TOTAL AMOUNT PUT TO TENDER
TOTAL AMOUNT PUT TO TENDER
PERCENTAGE RATE TENDER
Sr.No. Schedule Amount
1 Schedule - "B"- 1
2 Schedule - "B"- 2
Total Amount Rs.
Total Amount Rs.
I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage
(should be writen in figures and words) of the Estimated rates mentioned above amount of my / our
Tender works out as under.
Estimated Amount Estimated Amount
Put to Tender Rs. 28,44,054.00 Put to Tender Rs.
Add % Rs. Deduct %Rs.
Total Rs. Total Rs.
(In Words (In Words
Stamp with Signature of Contractor
Consl.Engineer Engineer
"DESIGN POINT" Thara Nagarpalika
Chief Officer President
Thara Nagarpalika Thara Nagarpalika
THARA NAGARPALIKA - THARA
DIST. : BANASKANTHA
SCHEME : 15th FINANCE COMMISSION GRANT
NAME OF WORK: AUGMENTATION THARA DRAINAGE
Item Qty Rate Unit Amount (Rs.)
Mechanical works
Non Clog Sub C/F pump :Supply, installation, testing & commissioning of
sewage submersible, non clog type suitable for working on three phase,
50 Hz ± 3%, 415 V ± 10%, AC supply, 1450 RPM synchronous speed
with 3 core flat copper cable from pump to starter panel with cable end
terminations, all supports, clamps, pipe fittings along with mechanical 2 304124.00 Nos.
seal, bearing bush, strainer etc. complete set & following M.O.C: Casing:
CI, Impeller: SS CF8M, Wearing ring & Bearing bush: Bronze, TC
mechanical seal, CS / SS bearing, SS shaft with sleeve, SS strainer &
MS motor body. 15 kw
LV Panel (ATS Starter):
SITC of Auto transformer starter suitable for local & remote pump control
application consisting of Auto Transformer (vacuum impregnated, air
cooled having three (3) tappings at 50%, 65% and 80%), incomer MCCB
/ MPCB, overload relay and contactors as per Type II coordination 2 33403.00 No
including digital MFM with RS 485 communication port, analogue type
ammeter with selector switch, run hour meter, required protective relays
& control accessories. Rating: - 30 Kw
LV Panel (S/D Starter):
SITC of Star Delta starter suitable for local & remote pump control
application consisting of MPCB, overload relay and contactors as per
Type II coordination including digital voltmeter, analogue ammeter with
selector switch, run hour meter, required protective relays & control
accessories. Rating: - 15 Kw
LV Panel (S/D Starter):
SITC of Star Delta starter suitable for local & remote pump control
application consisting of MPCB, overload relay and contactors as per
Type II coordination including digital voltmeter, analogue ammeter with
selector switch, run hour meter, required protective relays & control
accessories. Rating: - 11 Kw
Supplying, Installation, Testing And Commissioning of D. I. K-9 grade
D/F pipes (total length 5 meter) for following nominal bore diameter with
internal cement mortar lining including all taxes, insurance,
transportation, freight charges, octroi, inspection charges, loading, 60 3492.00 mtr
unloading, conveyance to departmental stores, stacking etc. complete.
(IS - 8329 / 2000) 150 mm Dia (Delivery line & Header Line)
Labour Charges for lowering, laying, Fixing with fabrication various size
section of MS such as joints, channels, angles, Iron Rails,
ISA/ISMC/ISMB/MS flat, Plates, Chequered plates, for cable trench etc
Complete with two coats of red oxide and two coats of approved colour
shade of epoxy paint as per relevant IS and as per specification.
Sluice Valve: Installation, Testing And Commissioning of ISI mark CI D/F
Sluice Valves as per IS:14846 (Latest Edition) of following class and
diameter including all taxes, insurance, transportation, freight charges,
octroi, inspection charges, loading, unloading, conveyance to
departmental stores, stacking etc. complete. (PN 1.0 )
150 mm dia (For Delivery Line & Header Line)
Dual Plate Check Valve (Reflex valve)
Installation, Testing And Commissioning of ISI mark CI D/F Non return
Valves as per API-594 (Latest Edition) of following class and diameter
including all taxes, insurance, transportation, freight charges, octroi, 8 8612.00 No
inspection charges, loading, unloading, conveyance to departmental
stores, stacking etc. complete. (PN 1.0 )
150 mm dia (For Delivery Line)
Item Qty Rate Unit Amount (Rs.)
Pressure Gauge: Installation, Testing, Commissioning of Diaphragm
sealed Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M)
process connection, IP 67, Glycerine filled, SS304 Case with Bayonet
Type Bezel, SS316 L Diaphragm, SS316 Bottom Housing Material, SS
316 Movement material, Aluminium dial with black graduation on white 12 3012.00 No
background, Micro Zero adjustable pointer, neoprene gasket, Blow out
disc, shatter proof glass, SS tag plate etc as per IS 3624. 150 mm dial
size 0 to 10 kg/cm2 (For Discharge + Common Header)
Supply at Site, Installation, Testing & Commissioning of lying
reinforced cement concrete : Providing and casting in situ C.C. in
grade M-15 (approx. corresp. to prop. 1:2:4) (proportions as per mix
design or as per Table 9 of IS456 2000 in masses by weigh batching )
using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work,
including scaffolding centering, form work, needle vibrated consolidation, 7 4732.00 cmt
curing comp. up to 6 meter depth or height (excluding cost of
reinforcement and neat finishing) with centering and
shuttering/deshuttering etc. comp. for structure for other than water
Dismantaling & removal / shifitng in existing Drainage like All Pump-
Motor set, Valves, Pipes & fittings, sluice gate , Tee, LT Panels, wiring,
cables, lighting, earthing system,etc. any other equipments not listed
here in but installed in existing drainage & required to be dismantled / 1 140000.00 Lot
shifting and all items are all Loading, Transportation, Unloading &
Stacking them at Store or location as per instruction of Engineer-In-
Charge. (Including 9 Nos. Pumps)
Labour Charges of draiange pumping empty And clear garbage,
Installation of Pipe, Pump, Electric Panel , Electric Work Joint in
drainage running pumping station. (3 Nos Pumping station Cleaning And 1 85000.00 Lot
6 Nos pump Install)
Consl.Engineer Engineer
"DESIGN POINT" Thara Nagarpalika
Chief Officer President
Thara Nagarpalika Thara Nagarpalika
THARA NAGARPALIKA - THARA
DIST. : BANASKANTHA
SCHEME : 15th FINANCE COMMISSION GRANT
NAME OF WORK :- RENOVATION OF MH AND HOUSE CONNECTION
Item Description Qty. Rate Per Amount
RCC Precast MH Frame and Cover Manufacture, Supply &
Delivery at store or at site of work precast RCC M200
Frame & Cover suitable to drainage MH and as per type
design & Drawing including cost of reinforcement MS Angle
or flat, curing mold work incl.
1.2 Cover (MH) 160 1184.73 No.
1.3 Frame (House Connection) 160 821.13 No.
1.4 Cover (House Connection) 160 929.20 No.
Providing and constructing Sewer manholes, scraper
manholes and unit house connection chamber, as masonry
in C. M, 1:5 and inside and outside 20mm thick plastering i
C. M. 1:3 necessary 100 mm coping with reinforcement in
R.C.C.M. per te rype desig n brck 200 foxong C.1. steps
and fixing manhole frame and covers (But excluding Supply
of manhole frame and covers) over manholes and nouse
connection chambers and fixing Manhole covers (but 20 12300.79 No.
excluding supplying of manhole covers) providing and-
fixing satet over Scraper manhole etc, complete, chain
wherever necessary as per the stipulations in the type
design complete as per latest CPHEEO manual.
Manhole Type A Inside Dia. Of 1200mm for depth upto
Providing and constructing rectangular brick masonry
chamber for house connection as per type design in brick
masonry in C. M. 1:3 induding M-100 in foundation M-150
in benching inside plastering in C. M. 1:3 and outside 20 8001.22 Nos.
plastering in C. M. 1:3 coping in M200 and fixing RCC
precast manhole frame and covers, but Exdl, supply of
manhole and cover etc. complete exc, excavation.
Labour Charge for erecting of Manhole and House
Connection frame and Cover incl. Carting From Store and 320 808 Nos.
fixing with required material and curing etc. Completed.
Consl.Engineer Engineer
"DESIGN POINT" Thara Nagarpalika
Chief Officer President
Thara Nagarpalika Thara Nagarpalika
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01 Tender.pdf
02 Form B-1.pdf
03 SCHEDULE B.pdf
05 Term and Condition.pdf
06 SPECIFICATIONS OF ROAD WORK.pdf
07 Electrical Specifications.pdf
07 SPECIFICATIONS BUILDING WORK.pdf
08 Vendor Civil work.pdf
GR for Document 18.01.08.pdf
GR for Excess 11.07.2017.pdf
GR for GST.pdf
GR for Performance Bond.pdf
Online Tender GR_1405_08.07.11.pdf
10 TEST REQUIRE FOR CONSTRUCTION MATERIAL.pdf
12 GR All.pdf
13 DMO_2799_11-Mar-2024_662.pdf
Download all tender documents and submit your bid