Pavement Marking with Hot Applied Thermoplastic Paints, Signboard and various Road Safety Furniture items in Thaltej Ward of North West Zone roads & Bumps of the city of Ahmedabad.

Name of Work : Pavement Marking with Hot Applied Thermoplastic Paints, Signboard and various Road Safety Furniture items in Thaltej Ward of

North West Zone roads & Bumps of the city of Ahmedabad.

Sr no. Qty Item Rate Rs. Per Amount Rs.

Road marking with hot applied thermoplastic paints strictly of Automark - "Specsmark", Asian Paints-

"Apcomark", Katalline- "Traffix O" or Berger Paints-"Sigmark" with reflectorising glass beads of

Automark-"Autolux Gold", "Swarco", "Sovitec" Asian Paints-Apcobids", "Potters" on bitumen surface

providing and laying a hot applied thermoplastic compound 2.5 mm thick including reflectorising glass

beads @ 250gms per sqm area, thickness of 2.5mm is excluding of surface applied glass beds as per

1 1072 IRC:35-2015. The finished surface to be level, uniform and free from streaks and holes. zebra patta 559.00 Smt

/bump patta lane/center line/ edge line/cut patta. The white color marking should provide liminance

coefficinet on cemend road shalll be min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux

during the service life during the day time. The marking should meet the performance criteria for night

time reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015. (As

per approved R.A)

Providing and laying Road marking with hot applied thermoplastic paints strictly of Automark -

"Specsmark", Asian Paints-"Apcomark", Katalline- "Traffix O" or Berger Paints-"Sigmark" with

reflectorising glass beads of Automark-"Autolux Gold", "Swarco", "Sovitec" Asian Paints-Apcobids",

"Potters" on bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface

applied glass beds as per IRC:35. The finished surface to be level, uniform and free from streaks and

holes.) Directional Arrow, Lettering (1 word - up to 4 letters), or any kind of Artwork etc. (which

shall maximum size upto 2.75 Sqmt out to out) Item shall include providing Stencils for lettering,

direction arrow signages, and as per requirement. including cleaning, required maintenance, etc.

complete pre and post work. Cost shall also include laying with applicator machine & operating boilers,

Skilled Labours for road marking, and Un-Skilled labours for barricading/protection, traffic diversion,

and it shall also include wastage of material, etc. Contractor shall be responsible to run his own

thermoplastic applicator machine & supply necessary diesel, gas, fuel, etc, also it will be his

responsibility to Operate preheater. for good quality of workmanship as instructed by Engg-in-charge.

Agency has to quote rate on Nos. work basis which shall include following manpower and machinery for

each set). (As per approved R.A)

Providing and applying Primer before hot applied thermoplastic paints marking on RCC road surface,

which must ensure better adhesion of thermoplastic paint to the surface and also increase paint

3 90.00 durability, including all material, manpower, tools and machineary required for work, with all required 47.00 Smt

safety standards to work in running traffic conditions, as per standards and as instructed by engg in

charge Agency has to quote rate on Sq.Mt. work basis).(As per approved R.A)

Providing & applying C.R. Base Road Marking Painting lines, dashes, arrow, letters etc. on Road in

two coats on new Work with ready mixed road marking paint conforming to IS:164 and AASHTO

4 30 standard M-248-90 on concrete/ bituminous surface,including required additive/ solvent, providing 219.00 Smt

safety cones,barricades, string, chalks or req. colour for line marking,etc. Cleaning the surface, removing

of all dirt , dust & other foreign matter and clear the site as per engineer incharge.(As per approved R.A)

Regulatory / Mandatory Sign: - Providing and fixing sign boards made out of 2mm aluminum sheet /

4mm ACP (Aluminum composite Panel); size 60 cm Dia Circle plus 60 cm x 20cm rectangular

additional plate as per design of IRC67-2012. Pre-treated with phosphating process & acid etching;

coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorized with Micro

Prismatic Grade retro reflective sheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.

Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

5 3 fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with best quality epoxy coatings in 5481.00 Nos.

black and white bends. The details of symbol foreach board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:1:2 CC block of size 45 x 45 x 60 Cms. for each leg. Including

excavation, curing etc. Complete under the supervision of engineer in charge. A warranty for 10 years for

the Retro reflective sheeting from original manufacturer & a certified copy of 3-year outdoor exposure

test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C

Type-11 Retro Reflective sheeting.(As per R.A)

Cautionary Warning Sign: - Providing and fixing sign boards made out of 2mm aluminum sheet / 4mm

ACP (Aluminum composite Panel); size 60 x 60 x 60 cm equilateral triangle plus 60 cm x 20cm

rectangular additional plate as per design of IRC-67-2012. Pretreated with phosphating process & acid

etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorized

with Micro Prismatic Grade retro reflective sheeting of Type-11 as per ASTM D-4956 and latest

M.O.S.T. Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required

6 12 and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with best quality epoxy 5009.00 Nos.

coatings in black and white bends. The details of symbol foreach board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:1:2 CC block of size 45 x 45 x 60 Cm for each leg.

Including excavation, curing etc. Complete under the supervision of engineer in charge. A warranty for

10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3-year outdoor

exposure test report from third party test lab for the product offered shall be submitted by contractor.

(A)Class-C Type-11 Retro Reflective sheeting.(As per R.A)

Facility Informatory Sign: - Providing and fixing sign boards made out of 2mm aluminum sheet / 4mm

ACP (Aluminum composite Panel); size 60 x 45 cm rectangular plus 60 cm x 20cm rectangular

additional plate as per design of IRC-67-2012. Pre-treated with phosphating process & acid etching;

coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorized with Micro

Prismatic Grade retro reflective sheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.

Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

7 1 fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with best quality epoxy coatings in 5373.00 Nos.

black and white bends. The details of symbol foreach board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:1:2 CC block of size 45 x 45 x 60 Cms. for each leg. Including

excavation, curing etc. Complete under the supervision of engineer in charge. A warranty for 10 years for

the Retro reflective sheeting from original manufacturer & a certified copy of 3-year outdoor exposure

test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C

Type-11 Retro Reflective sheeting (As per R.A)

CAT-EYE :-Supplying of Moulded Twin Shank Raised Pavement Markers made of polycarbonates and

ABS moulded body and reflective panels with Micro Prismatic Lens(No Glass Bed Lens) capable of

Providing total internal reflection of the light entering the lens face and shall support a load of 13635 kgs.

tested accordance to ASTM D 4280 Type H and complying to specification of category A of MORTH

Circular NO RW/NH/33023/10-97-DO lll Dt.11.06.1997. The height, width and length shall not exceed

8 300 20 mm,130 mm and 130mm and with minimum reflective area of 13 sqcm on each side and slope to the 323.00

base shall be 35+/-5 degree.The strength of detachment of integrated cylindrical shank,(of diameter not

less than 19+/-2 mm and height not less than 30+/-2 mm) from the body is to be a minimum value of

500 kgf. Fixing will be by drilling holes on the road for the shank to go inside, without nails and using

epoxy resin based adhesive as per manufacturer's recommandation and The color of the marker should be

as per the IRC 35-2015 and as directed by Engineer-In-charge.(R&B SOR 2023-24 Item code:26162A)

Flexible Median Marker :- Providing and Fixing of Flexible Median Marker that are made of tough,

high impact resistant, injection-molded, thermoplastic body with property of flexibility to provide high

durability. The dimension of Flexible Median Marker should not exceed 18.4 cm in height(including

shank height),12.5 Cm in width. ,0.65 cm in thickness and shank depth shall be 3.4 cm The body

structure shall be rounded at all its corners and edges. The plastic used for molding the Flexible Median

Marker should survive impact load of 5kg continuously for 750 times at room temperature. The logo of

the manufacturer shall be embossed on either side of the body in the injection molding process. The

Median Marker shall have flame like shaped body with, fluorescent yellow color retro-reflective sheeting

of size not less than 90 Cm square, with fully reflective micro prismatic cube corners as its retro-

reflective elements as per IRC 67 2012 and ASTM D4956-09 type XI specifications reflectivity values.

The retroreflective sheeting shall be one or both sides of the Flexible Median Marker and shall be edge

protected with no exposed edges which will prevent edge lifting, vandalism, sheeting damage, etc. The

Flexible Median Marker shall be fixed by a combination of epoxy adhesive and grouting as

recommended by manufacturer and Engineer in charge.(SOR AHMEDABAD 2023-24 Item code 26164)

Providing and fixing Swiss type bollard made out of 1.5mm CRC sheet ,height 140cms,bottom dia

23cm,top dia 12cm with direction plate of 30 cm dia fabricated necessary anchors as directed and also

provide through out lengh pipe of 25 NB for the strenthing of bollard and reflectorised Micro Prismatic

Grade Sheet (Type XI)and three yellow strip 6 Inches wide of Type XI Retro reflective Sheeting, fixing

with P.C.C M25 grade concrete(Foundation size 30cm×30cm×35cm).(As per AMC Traffic Department

Poly Urethane:Flexible Bollard - Providing and fixing Poly Urethane:Flexible Bollard made out of TPU

(Thermoplastic Urethane Poly Ethelene) and UV stabilized material, shall have high flexiblity and no

fedding colours, shall have fixed 3 bends of 100mm width type-I retro-reflective sheeting tape of white

colour which sheeting shall be fixed on posts using special adhesive, which shall not easy to tear, the

cylinderical shape pillar shall have diameter 160mm, height 1370mm, with square base of 250x250mm,

it shall have weight over 5.0kgs, Upper circular head shall be made of PE (Poly Ethelene) / PPCP

(Polypropylene copolymer) material with 410mm dia, print area of circular head part shall be 390mm,

both the parts shall be fixed with each other by rivetting and special glue material, with peripherial

boarder of black colour made of same kind of material, which shall have printed one side direction

indication sign and another side AMC Logo on micro prismatic type-XI retro-reflective sheeting. The

flexible bollards shall be fixed by nail of 12mm dia x 200mm length, by drilling in existing concrete / or

any hard surface by drilling and fixing by epoxy resin and hardner of make brand 3M or same kind of

approved brand material. Rate shall include cost of bollard with specified material, all kind of required

fixing materials and fixed at site including all fixing charges, surface preparation of any site condition as

per work requirements, with all lead and lift, and transportation of any distance. The work shall be

executed in direction of the engineer in charge. (As per approved RA of Traffic Project)

Estimated Tender Amount