GENERAL RM2025-26 RC 2 Phase I Cluster II Zone 3 One year Running Contract for various PWD roads under Roads Section Pandalam in Pathanamthitta District 6 roads stretches for a length of 15.06 Km-General civil work General Civil Work

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD129012/2024-2025:Providing laying and rolling of close graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type A) aggregates using viscosity grade bitumen (VG 30) to the required line, grade and level to serve as wearing course on previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel static roller of 80- 100 KN capacity and finishing to required level and grade By manual means

10.2:Maintenance of Earthen Shoulder (filling with fresh soil) Making up the loss of material/ irregularities on the shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment.

10.3:Maintenance of Earth Shoulder (stripping excess soil) from the shoulder surface to achieve the approved level and compacting with plate compactor

OD37217/2025-2026:Renewing existing DLP board for Running contract work with non-retro-reflectorised vinyl sign with 1 year warranty manufactured vinyl printed sheeting fixed over aluminium sheeting 2mm thick/aluminium composite material sheeting 4mm thick with area not exceeding 0.9sqm, with suitable back supporting frame of 25mmx25mm square hollow tube and GI pole of 50mm dia firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete min size 45cmx45cmx60cm, 60cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc