Operation and Maintenance of CPWS Scheme to Moolapeta (Satyanarayanapuram) and other habitations for the year 2026-27 (Excluding Power Charges) in Anakapalli Mandal of Anakapalli District Estimate cost of Rs.17.00 Lakhs

Operation and Maintenance of Multi Village Scheme for Supply of potable (chlorinated) drinking water at the specified quantity as per drinking water quality standards to all the habitations mentioned in the schedule through the existing network system comprising of infrastructure viz. RSF, OHBR, , Service Reservoirs i.e. OHSRs, GLSRs etc., including all operating expenses like wages to the system staff and other amenities applicable as per the labour act, Mobility/transportation facilities etc., for the designated qualified Pump operators, Electricians, Fitters, Helpers, Watchmen etc. for carrying out of all operations involved in drawing of raw water from source, treatment and supply of drinking water as per the guidelines of CPHEEO manual / Department at the rate of----------LPCD with relevant IS specifications wherever applicable and with highest quality standards. The scope of work also includes routine, periodic, breakdown and preventive maintenance, staffing and engaging manpower under Operation & Maintenance. The turbidity of supplied water shall be maintained below 1 NTU and should not exceed 5NTU by mixing alum in raw water duly arriving the Alum dosage by jar test. Disinfection with Bleaching Powder / Liquid Chlorine / Gas Chlorination shall be taken up to maintain Residual Chlorine not less than 0.2ppm in pipe lines at last FHTC in the tail end habitations. The scope of work includes taking up of all other incidental activities pertaining to the Operation and Maintenance of MVS and to follow all standard procedures by the agency as directed by the Employer / Engineer of the department. The Rate per KL is applicable to supply potable (chlorinated) drinking water by engaging system staff for Operation & Maintenance of said MVS (The rate is excluding cost of consumables, power consumption charges, Repairs and Renewals and GST).For all 0 to 5 MLD, 5 to 25 MLD, 25 to 50 MLD , 50 to 100 MLD and Sources having large dia High yielding tube wells (Annexure is enclosed for the System staff.) period from December-2026 to March-2027

Cost Supply and delivery of Bleaching powder as per IS 1066-1989 including cost and conveyance of all materials and all labour charges but excluding all taxes etc.,complete.

Arresting of leakages in existing HDPE pipe line including earth work excavation, removing and uprooting HDPE pipe line, cutting HDPE pipe, Jointing pipes and relaying HDPE pipes, jointing pipes true to alignment and gradient and testing the pipe line including labour charges but excluding cost of materials - 63mm dia HDPE Pipes 6 Kg/Cm2

Arresting of leakages in existing HDPE pipe line including earth work excavation, removing and uprooting HDPE pipe line, cutting HDPE pipe, Jointing pipes and relaying HDPE pipes, jointing pipes true to alignment and gradient and testing the pipe line including labour charges but excluding cost of materials - 75 mm dia HDPE Pipes 6 Kg/Cm2

Arresting of leakages in existing HDPE pipe line including earth work excavation, removing and uprooting HDPE pipe line, cutting HDPE pipe, Jointing pipes and relaying HDPE pipes, jointing pipes true to alignment and gradient and testing the pipe line including labour charges but excluding cost of materials - 110mm dia HDPE Pipes 6 Kg/Cm2

Arresting of leakages in existing PVC pipe line including earth work excavation, removing and uprooting PVC pipe line, cutting PVC pipe, Jointing pipes and relaying HDPE pipes, jointing pipes true to alignment and gradient and testing the pipe line including labour charges but excluding cost of materials - 63mm dia PVC Pipes 6 Kg/Cm2

Arresting of leakages in existing PVC pipe line including earth work excavation, removing and uprooting PVC pipe line, cutting PVC pipe, Jointing pipes and relaying HDPE pipes, jointing pipes true to alignment and gradient and testing the pipe line including labour charges but excluding cost of materials - 75mm dia PVC Pipes 6 Kg/Cm2

Arresting of leakages in existing PVC pipe line including earth work excavation, removing and uprooting PVC pipe line, cutting PVC pipe, Jointing pipes and relaying HDPE pipes, jointing pipes true to alignment and gradient and testing the pipe line including labour charges but excluding cost of materials - 160mm dia PVC Pipes 6 Kg/Cm2

Arresting of leakages in existing PVC pipe line including earth work excavation, removing and uprooting PVC pipe line, cutting PVC pipe, Jointing pipes and relaying HDPE pipes, jointing pipes true to alignment and gradient and testing the pipe line including labour charges but excluding cost of materials - 180mm dia PVC Pipes 6 Kg/Cm2

Supply and Transportation of 10 HP three phase 24 stage,4/5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I.including cost and conveyance of all materials and all labour charges etc.,complete

Supply and Transportation of 5 HP three phase12-16 stage,4/5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I.including cost and conveyance of all materials and all labour charges etc.,complete

Fabrication ,transportation and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., completeconsisting of the following equipment with all internal wiring using LAURITZ KNUDSEN (FORMERLY L&T) / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc. complete for 3 phasemotor pump sets. Makes: As per list of recommended brands.

Removing of 5 HP Submersible Pump set including cost and conveyance of all materials and all labour charges etc.,complete

Removing of 10 HP Submersible Pump set including cost and conveyance of all materials and all labour charges etc.,complete

Rewinding of 5 HP Submersible Pump set including cost and conveyance of all materials and all labour charges etc.,complete

Rewinding of 10 HP Submersible Pump set including cost and conveyance of all materials and all labour charges etc.,complete

Refixing of 5 HP Submersible Pump set including cost and conveyance of all materials and all labour charges etc.,complete

Refixing of 10 HP Submersible Pump set including cost and conveyance of all materials and all labour charges etc.,complete

Labour charges for cleaning of sumps/GLBR including cleaning and removal of algae,calcinations,sludge, dirt deposition from side walls and bottom portion of the container by disinfection with bleaching powder with all necessary tools, plants labour charges and cost of disinfectant etc. As per Approved Data but excluding all taxes etc cpmplete

"Supply and delivery of 80mm dia Electromagnetic Flow meter, manufacturer should have ISO 9001:2015 certification and flow meter testing conforming to ISO 17025-2017, Flow meter Tube: SS 304, Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement, Liner: Hard Rubber or PTFE suitable for drinking water application, Grounding: Grounding Rings SS 304/Grounding Electrodes of material SS 316, Coil Housing and Junction Box: SS 304 /Die Cast Aluminum / Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition), Ingress Protection: IP 68 for sensor and IP 67 for transmitter, Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above, Display: Digital LCD/LED (backlit LCD / LED) Display, Instantaneous flow, Bi- Directional flow and Totalized flow, Cable between Flow Head and Transmitter: Maximum 25 meters including

"Supply and delivery of 100mm dia Electromagnetic Flow meter, manufacturer should have ISO 9001:2015 certification and flow meter testing conforming to ISO 17025-2017, Flow meter Tube: SS 304, Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement, Liner: Hard Rubber or PTFE suitable for drinking water application, Grounding: Grounding Rings SS 304/Grounding Electrodes of material SS 316, Coil Housing and Junction Box: SS 304 /Die Cast Aluminum / Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition), Ingress Protection: IP 68 for sensor and IP 67 for transmitter, Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above, Display: Digital LCD/LED (backlit LCD / LED) Display, Instantaneous flow, Bi- Directional flow and Totalized flow, Cable between Flow Head and Transmitter: Maximum 25 meters including

"Supply and delivery of 200mm dia Electromagnetic Flow meter, manufacturer should have ISO 9001:2015 certification and flow meter testing conforming to ISO 17025-2017, Flow meter Tube: SS 304, Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement, Liner: Hard Rubber or PTFE suitable for drinking water application, Grounding: Grounding Rings SS 304/Grounding Electrodes of material SS 316, Coil Housing and Junction Box: SS 304 /Die Cast Aluminum / Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition), Ingress Protection: IP 68 for sensor and IP 67 for transmitter, Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above, Display: Digital LCD/LED (backlit LCD / LED) Display, Instantaneous flow, Bi- Directional flow and Totalized flow, Cable between Flow Head and Transmitter: Maximum 25 meters including

Operation and Maintenance of Multi Village Scheme for Supply of potable (chlorinated) drinking water at the specified quantity as per drinking water quality standards to all the habitations mentioned in the schedule through the existing network system comprising of infrastructure viz. RSF, OHBR, , Service Reservoirs i.e. OHSRs, GLSRs etc., including all operating expenses like wages to the system staff and other amenities applicable as per the labour act, Mobility/transportation facilities etc., for the designated qualified Pump operators, Electricians, Fitters, Helpers, Watchmen etc. for carrying out of all operations involved in drawing of raw water from source, treatment and supply of drinking water as per the guidelines of CPHEEO manual / Department at the rate of----------LPCD with relevant IS specifications wherever applicable and with highest quality standards. The scope of work also includes routine, periodic, breakdown and preventive maintenance, staffing and engaging manpower under Operation & Maintenance. The turbidity of supplied water shall be maintained below 1 NTU and should not exceed 5NTU by mixing alum in raw water duly arriving the Alum dosage by jar test. Disinfection with Bleaching Powder / Liquid Chlorine / Gas Chlorination shall be taken up to maintain Residual Chlorine not less than 0.2ppm in pipe lines at last FHTC in the tail end habitations. The scope of work includes taking up of all other incidental activities pertaining to the Operation and Maintenance of MVS and to follow all standard procedures by the agency as directed by the Employer / Engineer of the department. The Rate per KL is applicable to supply potable (chlorinated) drinking water by engaging system staff for Operation & Maintenance of said MVS (The rate is excluding cost of consumables, power consumption charges, Repairs and Renewals and GST).For all 0 to 5 MLD, 5 to 25 MLD, 25 to 50 MLD , 50 to 100 MLD and Sources having large dia High yielding tube wells (Annexure is enclosed for the System staff.) period from December-2026 to March-2027

Cost Supply and delivery of Bleaching powder as per IS 1066-1989 including cost and conveyance of all materials and all labour charges but excluding all taxes etc.,complete.

Arresting of leakages in existing HDPE pipe line including earth work excavation, removing and uprooting HDPE pipe line, cutting HDPE pipe, Jointing pipes and relaying HDPE pipes, jointing pipes true to alignment and gradient and testing the pipe line including labour charges but excluding cost of materials - 63mm dia HDPE Pipes 6 Kg/Cm2

Arresting of leakages in existing HDPE pipe line including earth work excavation, removing and uprooting HDPE pipe line, cutting HDPE pipe, Jointing pipes and relaying HDPE pipes, jointing pipes true to alignment and gradient and testing the pipe line including labour charges but excluding cost of materials - 75 mm dia HDPE Pipes 6 Kg/Cm2

Arresting of leakages in existing HDPE pipe line including earth work excavation, removing and uprooting HDPE pipe line, cutting HDPE pipe, Jointing pipes and relaying HDPE pipes, jointing pipes true to alignment and gradient and testing the pipe line including labour charges but excluding cost of materials - 110mm dia HDPE Pipes 6 Kg/Cm2

Arresting of leakages in existing PVC pipe line including earth work excavation, removing and uprooting PVC pipe line, cutting PVC pipe, Jointing pipes and relaying HDPE pipes, jointing pipes true to alignment and gradient and testing the pipe line including labour charges but excluding cost of materials - 63mm dia PVC Pipes 6 Kg/Cm2

Arresting of leakages in existing PVC pipe line including earth work excavation, removing and uprooting PVC pipe line, cutting PVC pipe, Jointing pipes and relaying HDPE pipes, jointing pipes true to alignment and gradient and testing the pipe line including labour charges but excluding cost of materials - 75mm dia PVC Pipes 6 Kg/Cm2

Arresting of leakages in existing PVC pipe line including earth work excavation, removing and uprooting PVC pipe line, cutting PVC pipe, Jointing pipes and relaying HDPE pipes, jointing pipes true to alignment and gradient and testing the pipe line including labour charges but excluding cost of materials - 160mm dia PVC Pipes 6 Kg/Cm2

Arresting of leakages in existing PVC pipe line including earth work excavation, removing and uprooting PVC pipe line, cutting PVC pipe, Jointing pipes and relaying HDPE pipes, jointing pipes true to alignment and gradient and testing the pipe line including labour charges but excluding cost of materials - 180mm dia PVC Pipes 6 Kg/Cm2

Supply and Transportation of 10 HP three phase 24 stage,4/5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I.including cost and conveyance of all materials and all labour charges etc.,complete

Supply and Transportation of 5 HP three phase12-16 stage,4/5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I.including cost and conveyance of all materials and all labour charges etc.,complete

Fabrication ,transportation and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., completeconsisting of the following equipment with all internal wiring using LAURITZ KNUDSEN (FORMERLY L&T) / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc. complete for 3 phasemotor pump sets. Makes: As per list of recommended brands.

Removing of 5 HP Submersible Pump set including cost and conveyance of all materials and all labour charges etc.,complete

Removing of 10 HP Submersible Pump set including cost and conveyance of all materials and all labour charges etc.,complete

Rewinding of 5 HP Submersible Pump set including cost and conveyance of all materials and all labour charges etc.,complete

Rewinding of 10 HP Submersible Pump set including cost and conveyance of all materials and all labour charges etc.,complete

Refixing of 5 HP Submersible Pump set including cost and conveyance of all materials and all labour charges etc.,complete

Refixing of 10 HP Submersible Pump set including cost and conveyance of all materials and all labour charges etc.,complete

Labour charges for cleaning of sumps/GLBR including cleaning and removal of algae,calcinations,sludge, dirt deposition from side walls and bottom portion of the container by disinfection with bleaching powder with all necessary tools, plants labour charges and cost of disinfectant etc. As per Approved Data but excluding all taxes etc cpmplete

"Supply and delivery of 80mm dia Electromagnetic Flow meter, manufacturer should have ISO 9001:2015 certification and flow meter testing conforming to ISO 17025-2017, Flow meter Tube: SS 304, Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement, Liner: Hard Rubber or PTFE suitable for drinking water application, Grounding: Grounding Rings SS 304/Grounding Electrodes of material SS 316, Coil Housing and Junction Box: SS 304 /Die Cast Aluminum / Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition), Ingress Protection: IP 68 for sensor and IP 67 for transmitter, Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above, Display: Digital LCD/LED (backlit LCD / LED) Display, Instantaneous flow, Bi- Directional flow and Totalized flow, Cable between Flow Head and Transmitter: Maximum 25 meters including

"Supply and delivery of 100mm dia Electromagnetic Flow meter, manufacturer should have ISO 9001:2015 certification and flow meter testing conforming to ISO 17025-2017, Flow meter Tube: SS 304, Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement, Liner: Hard Rubber or PTFE suitable for drinking water application, Grounding: Grounding Rings SS 304/Grounding Electrodes of material SS 316, Coil Housing and Junction Box: SS 304 /Die Cast Aluminum / Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition), Ingress Protection: IP 68 for sensor and IP 67 for transmitter, Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above, Display: Digital LCD/LED (backlit LCD / LED) Display, Instantaneous flow, Bi- Directional flow and Totalized flow, Cable between Flow Head and Transmitter: Maximum 25 meters including

"Supply and delivery of 200mm dia Electromagnetic Flow meter, manufacturer should have ISO 9001:2015 certification and flow meter testing conforming to ISO 17025-2017, Flow meter Tube: SS 304, Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement, Liner: Hard Rubber or PTFE suitable for drinking water application, Grounding: Grounding Rings SS 304/Grounding Electrodes of material SS 316, Coil Housing and Junction Box: SS 304 /Die Cast Aluminum / Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition), Ingress Protection: IP 68 for sensor and IP 67 for transmitter, Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above, Display: Digital LCD/LED (backlit LCD / LED) Display, Instantaneous flow, Bi- Directional flow and Totalized flow, Cable between Flow Head and Transmitter: Maximum 25 meters including