Loading
Loading…
Loading…
Tender Value
₹24.3 L
EMD Value
₹48,547
Closing Date
14 Oct 2026, 2:00 pm6d left
Executive Engineer
FHQ, SSB R K Puram New Delh
Repair/Renovation of Podium/ DIAS shed and construction of announcing booth in Drill shed at CTC, SSB Sapri (HP)
2026_SSB_928815_1
01/SSB/Sapri/2026-27
Open Tender
Civil Works
Percentage
45 days
CTC SSB Sapri
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹48,547
FHQ, SSB R K Puram New Delhi
5 Oct 2026
5 Oct 2026
15 Oct 2026
5 Oct 2026
14 Oct 2026
5 Oct 2026
7 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. All kind of soil. | 4.8 | cum | 212.34 | ₹1,019.23 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 3.89 | cum | 9,425.05 | ₹36,663.44 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 0.97 | cum | 8,149.2 | ₹7,904.72 |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete. | 24 | sqm | 469.13 | ₹11,259.12 |
| 5 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 125x63x4 mm | 15 | each | 115.92 | ₹1,738.8 |
| 6 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed
to required colour or shade, with necessary screws etc. complete 150x10 mm | 6 | each | 98.75 | ₹592.5 |
| 7 | Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed
to required colour or shade, with necessary screws etc. complete :
125 mm | 10 | each | 79.25 | ₹792.5 |
| 8 | Structural steel work riveted, bolted or welded in built up sections, trusses
and framed work, including cutting, hoisting, fixing in position and applying
a priming coat of approved steel primer all complete | 2,240.69 | kg | 159.95 | ₹3,58,398.37 |
| 9 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | 4,799.33 | kg | 232.56 | ₹11,16,132.18 |
| 10 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | 22 | meter | 636.85 | ₹14,010.7 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 8.45 MB
BOQ_976077.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .