REPAIR/REPLACEMENT OF EXISTING TEMPORARY SHED OVER 11 KV ELECTRICAL PANEL BEHIND E SECTION RHE OFFICE AT AFK

Amount

Excavating over area n. exe 1.5m deep and getting out in Hard/ dense soil.

Excavating over area n. exe 1.5m deep and getting out in Hard rock.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including quoins, arches, pillars etc but excluding ashlar dressed stonework and precast concrete article.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level).

M&L for providing cement concrete type B2 1:2:4 mix (40mm graded aggregate) in foundations, filling and mass concrete.

M&L for providing Reinforced Cement Concrete M-20 grade (Design mix) 20mm graded aggregate in Foundation, including rafts, footing, foundation beams, plinth beams; bases for columns, etc basement slabs, under reamed piles and mass concrete etc complete.

M&L for providing Reinforced Cement Concrete M-20 grade (Design mix) 20mm graded aggregate in Columns, pillars, piers, posts and struts.

M&L for providing Reinforced Cement Concrete M-20 grade (Design mix) 20mm graded aggregate in beams, lintels over 1.5m span.

M&L for providing Reinforced Cement Concrete M-20 grade (Design mix) 20mm graded aggregate in Chajjas, sunshades and the like etc complete.

M&L for deformed or twisted bars 10mm Dai and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for mild steel round bars of grade Fe 410-W (Gde-E-250) quality - A or Fe 290. (Gde-E-165) 5mm Dai and over up to 10mm in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for providing formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar works, vertical or to batter rough finished surface of concrete flat.

M&L for providing formwork to sides of pillars, posts, struts, piers, columns and stanctions for rough finished surface of concrete flat.

M&L for providing formwork to sides and soffits of beams, lintels, etc for rough finished surface of concrete flat.

M&L for providing formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surface of concrete flat.

M&L providing precast cement concrete type C1, 1:3:6 (20mm graded aggregate) in block masonry with solid blocks, exc 10cm width and setting in cement mortar 1:4, complete

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including applying, neeru finish to plastering as specified.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including sand faced finish to plastering as specified.

M&L for Hard core of gauge n.exc 63mm deposited, spread, and levelled in layers n.exc 15cm thick, watered and rammed to a true surface using broken stone or boulders.

M&L for murum filling in pavings, laid in layers n. exc 15cm thick. Spread, levelled and rommed inclucluding watering, consolideted thickness.

M&L for providing cement concrete 100mm thick type B1,1:2:4 mix (20mm graded aggregete in) floors including finishing the cement concrete surfaceeven and smooth using extra cement

M&L for preparing plastered or unplastered new surfaces and applying two coats of oil emulsion distemper on walls over one coat of primer with alkali resistant.

M&L for preparing plastered or unplastered new surfaces and applying two coats of cement paint on walls.

S&F powder coated anodised aluminium frame for doors windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tappinf screws as specified

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square excedding 0.5 sqm in each pane

S&F powder coated anodised aluminium windows & ventilator shutters side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary jointing cleats glazing clips rubber packing anodised aluminium snap beading screws anodisd aluminium fittings such as peg stys 150 mm long (1 no) hinges type B -21 100 mm long (2 no) suitable handle (1 no) etc complete all as specified

S&F framed worked such as grills, gratings etc with ends of bars shouldered and/or rivetted, or forged into spikes, framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; frameworks of water tanks and similar work conforming to be Fe 290. Gde-E-165.

S&F steel rolling shutter without ball bearing as specified including top cover anchoring rod haps and staple and one shop coat of primer erected in position as indicated complete push pull or manual type. Lath thickness 1.25 mm

S&F safety lever locks mild steel with 4 lever for rolling shutters

S &F mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts four on bolt plate and two on staple plate fixed 375 mm size

S&F galvanised 2 stand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails strain-ing bolts including securing or tying at crossing with and provision of galvanised mild steel wire staple or steel pins at wire entanglements, aprons, barriers, gates .

M&L for preparation of new or previously untreated steel or iron surfaces of any description, not otherwise mentioned over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

Dismantling wrought iron or mild steel work as in Fencing post and the like of any description not otherwise provided for.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nanital pattern or similar pattern roof covering.

Dismantling existing damaged Asbestos cement (corrugated, semi corrugated) sheets in roof covering.

Removing surplus excavted and demolished material to a distance exc 500m but n exc 1.5 km and depositing where directed. Soil ,rock, P.C.C.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to handed over to EM section and making good disturbed surfaces of walls, floors, etc.

M&L Point wiring in Stove anamelled steel conduit for one light point or one fan point controlled by one switch with PVC insulated stranded copper conductor (FR) cables 1.5 sq. mm size Make of wire - Polycab, Finolex, KEI, RR Kable only & Conduit should be as per IS Standard and heavy Gauge only.

M&L Point wiring with stranded copper conductor in Stove anamelled steel Conduit for one 3 pin socket out let 5Amp. on the same board with other switches with cable 2.5 sq. mm size including material and labour.

M&L Point wiring with stranded copper conductor in Stove anamelled steel Conduit for one 3 pin socket outlet, 6/16 Amps independent, with cables of 2.5 sq. mm size including material and labour.

Supply and fixing of Celling rose, 3 phase, PVC/Polycarbonate, Isolated body. Make- Havells/ Anchor/ Legrand/ L&T only.

Supply and fixing switch piano, flush type single pole, one way 6 Amp. Make- Havells/Anchor/Legrand/L&T only.

Supply and fixing of switch socket combination, 2 in 1, 3 pin, 6 Amp, flush type universal. Make- Havells/ Anchor/ Legrand/ L&T only.

Supply and fixing of switch socket combination, 2 in 1, 3 pin, 6 Amp and 16 Amp flush type universal. Make- Havells/ Anchor/ Legrand/ L&T only.

M&L Wiring for circuit/sub main wiring along with earth wire with 2X4 Sq. mm + 1X4 sq. mm earth wire sizes of FR PVC insulated stranded copper conductor, single core cable in surface/ recessed as required in Stove anamelled steel conduit. Make of wire- Polycab/ Finolex/ RR kable/ KEI only.

Supply and fixing of sheet metal encloser, IP 43, double door MCB DB, 4-way, (Single-phase) with neutral link, As per IEC 61439-3. 230 Volt (without MCB) Make -L&T/ Legrand/ Indo Asian/ Schneider/ ABB only.

Supply and fixingSP 6-32 amp rating 240 V, 10 KA, 'C' curve miniature circuit breaker (MCB) of single pole 6-32 Amp current carring capacity in the MCB DB complete with connection testing and commissioning, Make: Legrand/ Indoasian/ Schneider/ ABB only.

Supply and fixing exhaust fan, steel body AC single phase. 230 v of size 300m sweep with blades and frame and louvers. Make ; Polycab, Usha, Orient, Cropmton only.

Supply and fixing BLDC ceiling fans complete with blades, down rods, electronic regulator / remote control and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Make : Automburg/ Orient/ Havells/ Crompton only.

Supply and fixing LED tube light fitting 1x20 Watt, 220 volt, AC box type with driver, holder including led tube light connecting up with three coreflexible copper conductor cable of suitable size from celing rose complete. Make- Philips/ Bajaj/ Crompton/ Syska/ Orient only.

Supply and fixing LED street light fittings 60 Watt 230V, AC outdoor type with high pressure dia cast aluminium hosing and heat resistance complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Philips/ Bajaj/ Crompton/ Syska/ Orient only.

Excavation in trenches n. exc 1.5m depth and getting it out for laying of underground cable in Hard soil.

Excavation in trenches n. exc 1.5m depth and getting it out for laying of underground cable in Soft rock.

Excavation in trenches n.exc 1.5m depth and getting it out for laying of underground cable in Hard rock. By use of machinery/ Breaker.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm above ground level in hard dense soil.

Providing of earthing complete with galvanized steel earth electrode of size 60cmX 60cm X 6mm buried directly in ground ( earth pit depth not less than 2.25mtr below normal ground level)with top edge of the earth plate not less than 1.5mtr below the normal level connected to GI earth wire 4mm dia by means of nuts bolts washers, check nuts etc. of GI /steel all as shown on electrical plate No.3 of SSR Part -I and connected to electrical panel board/static plate all as specified and directed. (The rate is including necessary earth work, PCC, Chamber cover watering pipe wire mesh etc. complete.

Supply and fixing of galvanized tubes medium grade 15mm bore.

Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6.

Rendering 10mm thick on fair faces of brickwork or concrete surface in cement plaster 1:4.

S&F Cast iron work grade FG 150 unmachined, in chamber covers, brackets, gully traps, grating railings, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, part of ranges balusters and similar articles including material and labour. (Article not exeeding 5 Kg each)

Supply and fixing of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit or pipe or fixed to poles or any other indicated situation for loop earthing etc. as required, 25X4 mm galvanized iron strip.

M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional aera 10 sq mm 2 core of make Polycab, KEI, Havells only.

Credit Item-Dismantling wrought iron or mild steel work as in Fencing post and the like of any description not otherwise provided for.

Credit Item-Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nanital pattern or similar pattern roof covering.

Credit Item-Dismantling existing damaged Asbestos cement (corrugated, semi corrugated) sheets in roof covering.

M/S Hrushikesh A. Patil