REPAIR TO CHAIN LINK FENCING, BOUNDARY WALL AND MISC B/R WORK UNDER AGE B/R-I AT AF STN JODHPUR

Amount

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises complete all as specified & directed by the Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removing the demolished material to a distance exceeding 250 m but not exceeding 500m and depositing where directed, complete all as specified & directed by the Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site complete all as specified & directed by the Engineer-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, masonry, etc. and making good the disturbed ground complete all as specified & directed by the Engineer-in-Charge.

Demolition of Brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed by the Engineer-in-Charge.

Material & labour for 15 mm thick rendering in cement mortar 1:4 on stone masonary or other than fair face of brick work including surface finished even and smooth without using extra cement complete all as specified & directed by the Engineer-in-Charge.

Material & labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint, over a coat of Chalk whiting, on plastered surfaces,preparatory to distempering complete all as specified & directed by the Engineer-in-Charge.

Material & labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of exterior weather proof water base emulson paint (white or tinted) , over a coat of Chalk whiting, on plastered surfaces,preparatory to water base emulsion complete all as specified & directed by the Engineer-in-Charge.

Material & labour for 100 mm thick PCC1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base floor/floors and paving etc surfaces finished even & fair complete all as specified & directed by the Engineer-in-Charge.

Material & labour for 25mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in base course for tiles in floors, surfaces finished even & fair complete all as specified & directed by the Engineer-in-Charge.

Material & labour for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in sub base floor/ floors and paving etc complete all as specified & directed by the Engineer-in-Charge.

Material & labour for 80mm thick rubber moulded machine pressed PCC interlocking paver block confirming to IS 15658-2006, of M-40 Grade with grey cement and pigment, of any size, colour and pattern as approved by GE, laid dry over and including 25mm thick screed river washed sand cushion as in floor, complete all as specified & directed by the Engineer-in-Charge.

Material & labour for 10 to 12 mm thick vitrified unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/rectangular) of size not less than 300mm x 300mm as in parking/hardstanding etc set, jointed in cement slurry and pointed in white or coloured cement to match the colour/shades of tiles, over and including 15 mm thick screed bed in cement mortar 1:4, complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing for 25mm thick rubber moulded chequered cement concrete tiles of any size, colour and pattern as approved by GE, set, jointed and pointed in neat cement slurry in floors, over & including 15mm thick screed bed in CM 1:6 with grey cement and pigments complete all as specified & directed by the Engineer-in-Charge.

Material and labour for precast cement concrete blocks masonary with solid blocks exceeding 10 cm in width in PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) & set in cement mortar 1:4 in walling as in kerb block, one edge chamferred and finished complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing for Fencing posts and struts made of Mild Steel sections i.e. angle, channel,flat iron etc. including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding etc and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by the Engineer-in-Charge.

Material and labour for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st quality) over one coat of red oxide primer of same make complete all as specified & directed by the Engineer-in-Charge.

Material & labour for Restraining and resecuring barbed wire fencing including making good staples etc (each line wire to be measured) complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in Repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steelpins, etc. as directed (each line wire to be measured) complete all as specified & directed by the Engineer-in-Charge.

Fixing only old retrieved galvanised 2 strand steel barbed wire and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing galvanised steel punched type concertina coil of 1050 mm dia (dia of coil when unstretched) (weight of the concertina coil not less than 14 Kg/coil and opening length should be minimum 8.0 m) & fixed to angle iron post/struts with 3.15mm dia GI wire complete all as specified & directed by the Engineer-in-Charge.

Material & labour for squared rubble walling, Jodhpur type, brought to courses, curved on plan to a mean radius not exceeding 6m, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge.

Material & labour for squared rubble walling (Except Stone), Jodhpur type, brought to courses, curved on plan to a mean radius not exceeding 6m, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge.

Excavating in post holes (or similar holes) each hole not exceeding 0.5 Cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and remvoing surplus soil to a distance not exceeding 50m and making good surfaces in solf/loose soil complete all as specified & directed by the Engineer-in-Charge.

Material & labour for PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) in foundation, sub base, filling and mass concrete complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing for mild steel flat iron 40mm x 6mm for securing the chain link fencing including necessary drilling for holes, cutting, punching, bending etc complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing for 5mm to 10mm dia mild steel bolts (machine made) with hexagonal or square head at one end and screwed the other with washers and one hexagonal or square not exceeding 10 cm long complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing for 12mm dia Mild Steel round bars Fe-290 (Gde E165), in available lengths fixed to fencing posts, securing/fixing with clips or MS wire complete all as specified & directed by the Engineer-in-Charge.

Supply & Fixing for Chain link mild steel galavanized fencing, of mesh size 100mm x 100mm , made of 3.15mm dia GI wire ; including line wire, any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and directed by the Engineer-in-Charge.

Om Trading Corporation

JB INFRA

CHOUDHARY CONSTRUCTION CO

GANGADHAN ENTERPRISES

DEV INDUSTRIES

POOJA CONSTRUCTION