REP AND CLEANING OF SEWAGE LINE AND REP REPLACEMENT OF FLOORING DADO PLINTH PROTECTION AND CERTAIN MISC BR WORK AT SRC AREA MH ASC MINOR UNITS AND DAD AT RAMGARH CANTT

Amount

Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/ pipes,foundations,laying of cable, shafts, well, cesspits, manholes etc. complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers of not exceeding 25 cm thick after the cables & pipes etc. are laid, jointed & tested and foundations complete all as specified and directed by Engineer-in-Charge.

Removal of surplus excavated soil not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified.

Demolition and breaking up drain pipes of 150mm dia (SGSW/AC/RCC/PVC) set in cement mortar including bed concrete and removal of debris to low lying area of distance not exceeeding 100 mtr complete all as directed by Engr-in-Charge.

Demolition and breaking up drain pipes of 200 mm dia (SGSW/AC/RCC) set in cement mortar including bed concrete and removal of debris to low lying area of distance not exceeeding 100 mtr complete all as directed by Engr-in-Charge.

S & F 150 mm bore Reinforced concrete drain pipes of class NP-2 laid and jointed with collars in trenches and jointed complete all as specified and as directed.

S & F 200 mm bore Reinforced concrete drain pipes of class NP-2 laid and jointed with collars in trenches and jointed complete all as specified and as directed.

S&F in repair for 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor etc.,complete all as specified and directed.

M & L for Concrete bed to 150 mm bore drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) including necessary shuttering and tested of pipes complete all as specified & as directed

M & L for Concrete bed to 200 mm bore drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) including necessary shuttering and tested of pipes complete all as specified & as directed

Demolition of plain cement concrete(un-reinforced ) in ground floors, terrazo tiles floor & paving not exceeding 15cm thickness (below or above ground level) and removal of rubbish off from site complete all as directed by Engr-in-Charge.

M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-2 (using 40mm graded crushed stone aggregate ) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work , complete all as specified and directed.

M&L for plain cement concrete 1:3:6 ,type C-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring, foundations,filling & mass concrete for fencing posts, foundation of pole ,struts & stay assembly etc complete all as specified and directed.

Demolition of reinforced cement concrete as in chullah hoods, shelves, cover slab and platform, etc,and removal of rubbish off from site complete all as directed by Engineer-in-Charge.

M&L for precast reinforced cement concrete 1:2:4 ,type B-1 (using 20 mm graded crushed stone aggregate) as in kitchen platform, shelves ,man hole cover slab/ drain cover slab etc. including necessary formwork complete all as specified and directed. Note : Reinforcement will be measured & paid seperately under respective item of BOQ.

M&L for mild steel TMT bars 10 mm dia and over grade Fe -500 , as in reinforcement ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars, including segregation of serviceable bricks for reuse & removal of rubbish out off from site etc complete all as specified and directed.

M&L for Brick work using Sub class "B" bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 as in drain ,man holes etc complete all as specified & directed.

M&L for Brick work using Sub class "B" bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified & directed.

M&L for Brick work but except bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed. Note: old serviceable brick as retrieved from item No.17 of BOQ here-in before.

M&L for half Brick thick brick work using Sub class "B" bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 etc complete all as specified & directed.

M&L Extra for forming fair finished drain or channel to any inner girth in cement concrete, using extra cement including forms, moulds, etc (inner girth only to be measured) complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregates) as in levelling course,kerb/ benching/ coping /window cill etc including weathering, slightly rounded or chamfered angle and throating including use & waste of necessary form work etc complete all as specified and directed.

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc & removing the debris from the premises upto 500 m from the MOD land complete all as specified and directed

M&L for 3 mm thick setting coat of cement mortar 1:1 ,trowelled to even and smooth finish over rendering 15 mm thick on fair face brick masonry/concrete surface etc in CM (1:4) surface finished even & smooth using extra cement mixed with using water proffing compound @ 3% by weight of cement complete all as specified and directed.Note:Water proofing compound will be measured and paid seprerately under respective item of "BoQ".

Supply only water proofing compound complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair face of brick masonry/concrete surface etc., in cement mortar 1:4, surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair face of brick masonry/concrete surface etc., in cement mortar 1:6, surface finished even & smooth without using extra cement complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing bweinching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required in 150mm internal dia of pipe complete all as specified and as directed.

Removing blockage of or from water closet(Indian or European type)/WHB /Siink /Floor trap/Gully trap upto first manhole ( Indian or European type ) by removing solid/liquid or mud deposited in the trap or CI pipe line by rodding manually and removing the sludge duly covered in a hygenic manner and making the WC (Indian or European type)/WHB/Siink/Floor trap/Gully trap fully functional complete all as specified and as directed by Engr-in-Charge.

Cleaning of under ground sewage pipe line(cleaning length not exceeding 30 m from man hole or from manhole to septic tank) 150mm dia/bore of pipe by roding and well flushing by using sufficient water and making it clear for easy flow of sewage up to the septic tank including cleaning of manhole sludge, silt etc removing the sludge in low lying area and burying it in pits and replacing manhole cover in position after clwaning complete as directed by Engineer-in-Charge.

Cleaning of under ground sewage pipe line(cleaning length not exceeding 30 m from man hole or from manhole to septic tank) 200 mm dia/bore of pipe by roding and well flushing by using sufficient water and making it clear for easy flow of sewage up to the septic tank including cleaning of manhole sludge, silt etc removing the sludge in low lying area and burying it in pits and replacing manhole cover in position after clwaning complete as directed by Engineer-in-Charge.

Cleaning of septic tank of any capacity and any type of material like solid/fluid, mud sludge etc by mechanical motorised suction machine and deposited /removing the sludge etc outside the MoD land shall be conveyed in closed container and also disposed off in the place properly using bleaching powder etc complete all as directed by Engr - in -Charge. Note: Date of cleaning of Septic Tank with location shall be recorded in MB for record purpose.

Taking down eaves gutter, soil west and vent , rain water pipes (any size or pattern) , including all fittings complete all as specified and directed by EIC.

S & F 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed

S&F in repair for 110 mm bore PVC(SWR) bends any radius complete all as specified and directed.

S&F in repair for 110 mm bore PVC(SWR) bends any radius with access door jointed with rubber ring joints complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) branch piece pipe single, (Single -Y) equal or unequal with access door complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) branch piece pipe single, (Double -Y) equal or unequal complete all as specified and directed.

S&F in repair 110mm bore PVC(SWR) vent Cowl complete all as specified and directd.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall/laid in trenches complete all as specified and as directed .

S&F in repair for 75 mm bore PVC(SWR) bends any radius complete all as specified and directed.

S&F WC squatting pan " Orissa Pattern" of size 580 mm X 440 mm white with integral foot rest including cast iron "P" or "S" trap, front or back inlet and making connection to trap & to flushing cistern complete including taking down existing pan & making good disturbed surface complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the all rubbish off from the premises complete all as specified and directed.

M & L glazed ceramic coloured tiles of size 300 mm x 450 mm x7mm thick/350 mm x 250 mm x7mm thick ,as in vertical surface such as dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles, over & including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L non skid coloured ceramic tiles 7 mm to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc.,laid over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

S & Fin repair health faucet(ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection & fixed in position complete all as specified & directed.

S&F in repair vitreous China urinals, bowl flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)(back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe etc.complete all as specified and as directed

S & F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float and handle, PVC flush pipe 32 mm bore & PVC connection 15 mm bore 450 mm long with PTMT nuts and brackets complete set & making good disturbed surface with CM 1:3 complete all as specified and directed.

S&F in repair vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

M&L for cleaning of PVC water storage tank of capacity 1000 ltr on existing bldgs with disconnecting of inlet and outlet pipe ,cleaning with brush/cotton cloth,removing of silt,dirt ,vegetation etc by applying bleaching powder ,lime and washing of water tank and fixed in same position complete all as per specified and directed by Engr-in-charge.

M&L for cleaning of PVC water storage tank of capacity 500 ltr on existing bldgs with disconnecting of inlet and outlet pipe ,cleaning with brush/cotton cloth,removing of silt,dirt ,vegetation etc by applying bleaching powder ,lime and washing of water tank and fixed in same position complete all as per specified and directed by Engr-in-charge.

M&L for mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps;; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and as directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring & mass concrete etc complete all as specified and directed.

M & L for 40 mm thick PCC (1:2:4), type B - 1 (using 20 mm graded crushed stone aggregate) as in floor finishing,even & smooth using extra cement including fixing of glass strip complete all as specified and directed. Note: Glass Strip shall be measured and paid separately.

Supply only 38mm wide glass dividing strips, 3mm thick complete all as specified and directed.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., ,as in dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles ,over & including 10 mm thick rendering in cement plaster in CM (1:4), complete all as specified and directed.

M&L for Vetrified ceramic Light coloured floor tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles, over & including 15 mm thick screed bed in cement mortar (1:6) etc complete all as specified & directed.

M&L for Vetrified ceramic Light coloured floor tiles 10 mm thick (Square/ rectangular) area of each tile not exceeding 0.36 sqm, in verticle surface such as dado/skirting etc., set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles ,over & including 10 mm thick rendering in cement plaster in CM (1:4) complete all as specified and directed.

Dismantling stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, and removal of debries from site complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20mm -25 mm thick of size not less than 575 mm X 575 mm, over laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing & polishing over & including 20 mm thick screed bed in CM (1:6) complete all as specifed & directed.

M&L for machine cut kota stone slab in skirtings,riser of steps ,dado & pillar 10 to 12 mm thick laid and jointed with grey cement slurry pointed with cloured cement to match the shade of the slab including grinding rubbing & polishing over 10 mm thick backing coat in CM (1:4) etc complete all as specifed & directed.

M&L for 18 mm to 20 mm thick granite slab (or any type) table rubbed and pre mirror polished in steps,jambs, pillar,window cill,cooking platforms and like in cement mortar1:4, set & jointed in neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over & including 15 mm thick rendering in cement mortar(1:4) etc including dismantling of exsting slab complete all as specifed and as directed.

M&L for marble work of any shade 16 to 18mm thick in cooking platform, steps, window cills, etc over and incl 15mm thick cement screed base in CM 1:4 ,laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab including rounding of slab including demolition of old slab complete all as specified and directed.

Grinding & mirror polishing with bees wax of existing kota stone/ Terrazo /granite flooring, etc including treating the surface with beeswax polish where ever required to give high glossy finish complete all as directed by Engr-in-charge

M&L for preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of alkali primer including necessary scaffolding complete all as specified & as directed.

M&L for preparation of newly plastered surface of wall and applying 2.0 mm thick wall care putty in two layers to make entire surface free from undulations complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M/s Ray construction (BID ID -3332910)

upadhyay engineers and consultant (BID ID -3342274)

M/s friend enterprises (BID ID -3329965)

M/S Balaji Construction & Company (BID ID -3335165)

M/S ROHIT CONSTUCTION (BID ID -3341364)

ARYA ENTERPRISES (BID ID -3335181)

AASHIRWAD ENTERPRISES (BID ID -3343091)