PROVISION OF AREA DRAINAGE, VIEW CUTTERS AND SPECIAL REPAIRS TO FIRING RANGE AND BUILDING NO P-07

Amount

Taking down cement or cement plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc. To receive new plaster complete all as specified.

M&L Rendering 15 mm thick in CM 1:6 on surfaces or surface other than fair face of brick-work or on one side of lathing of stone masionary or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 12 mm thick modified polymer ready mix plaster to Concrete surfaces wall finished even and fair with 3 % of weight of cement WPC , complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 on ceiling of concrete surface and finishing the surface even and smooth all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying 1 coat of wall care white putty, 1-2mm thick and further applying 2 coats of oil emulsion distemper over a coat of wall priming paint complete all as specified and as directed.

M & L for complete removal of existing treatment on walls and applying 1 coat of wall care putty,2mm thick and further applying two coat of oil bound distemper over one coat of primer paint complete all as specified and directed.

M&L for Preparation of new plastered surfaces in walls soffits, facia roof and applying Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. at any height including necessary scaffolding etc complete all as specified and as directed by Engr-in-Charge of weather coat primer all as specified.

M&L for Preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for Preparation of old plastered/unplastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing of rubbish complete all as specified and directed.

M & L for Glazed ceramic coloured printed tiles in vertical surface 300x450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tile including 15mm thick screed in cm (1:4) as in skirting/dado complete all as specified and directed by Engr-in-Charge

M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, (300x300mm) in floors etc. set and jointed in neat cement slurry including 20mm thick screed 1:4 as in flooring complete all as specified and directed by Engr-in-Charge.

M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L, Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed

M&L for vitrified ceramic tiles light shade 9-10 mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but including 600 x 600mm size in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 9-10 mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but including 600 x 600mm size as in dado/ skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar complete all as specified.

M & L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M & L Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, skirting and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types, including 20mm thick screed bed in CM 1:4, jointed and pointed with grey cement slurry and pointing with white cement (1:3) using marble dust with admixture of pigment to match with shade cutting and polishing etc complete all as specified.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade for the slab including rubbing and polishing etc and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Demolition of PCC (unreinforced) in ground floors & pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate for plinth protection with finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 Type C-2 using 40mm graded stone aggregate as in sub bases all as specified & directed by Engineer-in-charge.

M&L for Designed parking tiles (of approved shade and design), 8to10mm thick, of superior quality, square / rectangular size 300x300mm joint free, as in floors, etc.set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match shade of tiles laid over & including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

Taking down aluminium sliding window /ventilator including glass complete all as specified and directed.

S& F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

Taking down wooden chowkats or frames not exc 1.5sqm each with shutters (without taking off shutters from the frame) and disposing off complete all as specified

Taking down wooden chowkats or frames exc 1.5sqm but not exc 4sqm each with shutters (without taking off shutters from the frame) and disposing off complete all as specified.

Taking down and refixing in same opening after resecuring or easing and adjusting size of shutter exc 01 Sqm but not exc 02 sqm each complete all as specified

S&F PVC door solid frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified.

S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails MS frameshall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain cover PVC sheets for top rail, lock rail and bottom rail on either side and as gap insertfor top rail and bottom rail, panelling of plain of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet beading and joined together with solvent cement supplying l and fixed in the frame at site as per specification and drawing complete all as specified and directed.

S&F 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed

S&F 2nd class hardwood 35mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats directed.

S&F 35mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mmB.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Overall length of cover plate 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete all as specified and directed.

S & F of 100 mm long stainless steel butt hinges, medium weight approved make ISI marked complete all as specified and directed.

S & F 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F of 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F Aluminium handles 150mm long anidised aluminium , cast type, complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth including knotting and stopping and applying 2 coats of synthetic enamel paint over a prink primer (any tint/Shade) complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Supply and fixing of 18mm thick plain colour Cellular PVC board , as per approved shade and accessories for cupboards, modular kitchen cabinets,etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 18mm thick prelaminated colour PVC board for outer door, as per approved shade and accessories for cupboards, modular kitchen cabinets,etc complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing PVC Cutlery sheet basket of size 17"x20"x4", or near proximal dimension including channel and required accessories complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing three Shelf pullout of size 12"x20"x21" or near proximal dimension , stainless steel, including channel and required accessories complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Plate basket of size 17"x20"x 6" or near proximal dimension stainless steel, including channel and required accessories complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise described for of any description complete all as specified and directed.

S&F mild steel rolled section Fe-410-W(Gde E-250), quality 'A' as in post, main and cross beams, rafters, purlins connected to common rafters fixed with angle iron clips or other connecting plates complete all as specified and directed.

S&F Rolled MS steel work in tubular trusses and tubular posts including special shaped washers etc., complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 graded ST 240 complete as specified and directed.

S&F 5mm thick mild steel plates Fe-410 (Gde E-250) quality-A plain or chequered as in gates, shutters, similar steel structural works complete all as specified and directed

S& F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for framed work such as in doors or gates of angle or other section with gusset plates rails, braces etc. complete drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete Fe 410-W (Gde-E-250) quality-B as specified & directed by Engineer-in-charge.

Dismantling Plain or corrugated steel sheeting, any type / gauge, thickness and any patten of roof coverings, hanger door, hanger roof complete all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

Taking down aluminium decogrill of any size and any type all as specified and directed.

S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 103 or equivatent 6.5 mm thick all as specified and as directed

S&F 4.8 mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square exc 0.5 sq. m in each pane complete all as specified and as directed

S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and as directed

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm with aluminium wire staples complete all as specified and as directed

S&F in repair 25mm dia Stainless Steel curtain rod etc complete all as specified and directed.

S&F in repair statinless steel bracket for curtain rod of 25mm dia for fixing in walls etc complete all as specified and as directed

Demolition and breaking up drain pipes 110/75mm of PVC SWR pipes laid in floor/wall complete all as specified and as directed

S&F of PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F of PVC (SWR) bends 110mm dia access to door complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal access to door complete all as specified and as directed

S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed

S&F 75mm bore PVC SWR pipe single socketed in any length with rubber ring joints laid in in floor/wall complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal access door complete all as specified and directed.

M&L in 75 mm out let PVC floor trap, plain with openable (two piece type) grating including jointing with solvent cement complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed.

Taking up or down steel tubing of 25 mm bore and connections complete all as specified and directed.

Taking up or down steel tubing of 20 mm bore and connections complete all as specified and directed.

S&F in Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls,ceilings or in floors etc pipes incl cutting/chases of walls etc 25mm inclluding fitting (such as elbow teen reducers, couplers short pieces, connection uion etc) whatever required as per manufacturer's instruction fixed on wall /ceiling complete all as specified and directed.

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls,ceilings or in floors etc pipes incl cutting/chases of walls etc 20mm including fitting (such as elbow teen reducers, couplers short pieces, connection uion etc) whatever required as per manufacturer's instruction fixed on wall /ceiling complete all as specified and directed.

S&F in repair stainless steel plate rack of size 90x75x25cm depth made out of 0.80mm thick sheet complete all as specified and directed.

S&F in repair sink with drainage board made of stain finish 1 mm thick kitchen or laboratory with plugs washers including bedding in cement mortar to dwarf wall or including fixing cantilever brackets overall size 915mm x460mm bowl size 410mmx330mmx160mm complete all as specified and directed/approved by Engr-in Charge.

S&F in repair sink without drain board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed/approved by Engr-in Charge.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S & F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repair toilet paper holder, vitreous China,box type complete all as specified and directed.

S&F in repair 8mm dia brass chromium plated health faucet (hand shower) with 01m long flexible tube and wall hook complete all as specified and directed of make Essco or equivalent make as approved by GE.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc .complete all as specified and as directed

S&F in repair 10 Litres, PVC valveless,syphonic action type, flushing cistern, low level, white, with inlet, ball vlave, float and handle including bracket complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm excluding taps, waste coupling and waste pipe.including cutting for and pinning in ends of brackets or recting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed

S&F in repair grating square 150 mm size of PTMT openable type complete all as specified and directed.

S&F in repair PVC waste pipe suitable for wash hand basin/sink including fixing arrangement complete all as specified and as directed

S&F in repair 32 mm bore waste coupling of PTMT (half of full thread) complete all as specified and as directed

S&F in repair 40 mm bore waste coupling of PTMT (half of full thread) complete all as specified and as directed

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repairs 15mm brass chromium plated bib cock with wall flange, complete all as specified and directed of Make Essco or equivalent make approved by GE.

S&F in repairs Fancy type bib taps, long shank chromium plated cast copper alloy 15mm bore with crutch screwed down and fixed complete all as specified and as directed.

S&F in repairs CP Pillar taps 15 mm dia but fancy type, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for pvc pipe and fixed complete all as specified and as directed.

S&F in repairs 15mm dia stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, with crutch , screwed at both ends for iron pipe or for unions complete all as specified and as directed.

S&F, in repair, hot & cold wall mixer, brass chromium plated with complete fittings set, screwed for 15mm bore GI pipe complete all as specified and directed. Make- Essco or equivalent make as approved by GE.

S&F,in repairs chromium plated over head shower 100mm dia round shape single flow (ABS Body chrome plated with Gray face plate) with rubit cleaning system complete all as specified and directed of Make Essco or equivalent make approved by GE.

S&F in repair 120mm dia chromium plated overhead shower with arm complete all as specified and as directed.

S&F in repairs 15mm dia stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch , screwed at both ends for iron pipe or for unions complete all as specified and as directed

S&F in repair CP shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S & F in repair soap dish, fixed to tiled wall surfaces with plugs and chromium plated brass screws complete all as specified and as directed.

S&F in repairs , chromium plated, Towel Rail, 600mm long complete all as specified and directed of make Essco or equivalent make as approved by GE.

S & F in repairs, brass chromium plated tubular towel rod 600mm long complete all as specified and as directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and as directed.

S&F 20mm thick granite machine cut corner shelf of dia 25cm (inner quarter circle shape) nosing and polishing complete fixed to wall in CM 1:3 mortar complete all as specified and as directed.

Dismantling of water storage tank of exc 500 ltrs& n exc 1000 ltrs capacity complete all as specified and as directed.

S&F 1000 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 m m - 2 1 0 g m s /25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.

Dismantling of water storage tank of exc 250 ltrs& n exc 500 ltrs capacity complete all as specified and as directed.

S&F 500 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 m m - 2 1 0 g m s /25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.

Taking down / Demolition of old textile covering from roof (old WPT) complete all as specified and directed.

M&L PCC type B-0. 1:2:4 (12.5 mm graded aggregate) as in Padding concrete to over roof slab 40 mm thick mixed with WPC 3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed. (WPC shall be measured and paid separately).

M & L for Rendering 10 mm thick rendering in CM (1:4) over PCC padding surface finished even & smooth without using extra cement with WPC @ 3% by weight of cement complete all as specified and directed (integral WPC will be measured separately).

Supply only integral waterproofing compound complete all as specified and as directed.

M & L for water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment / specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 3 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non woven polyester fabric or weight not less 150 gms per sqm. Polymeric membrane shall be taken to a height of 60 cm 9 minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note:- (i) Laying of APP based membrane shall be done by torch on method and as per manufacturer's instructions. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and all overlaps and joints are properly sealed as per manufacturer's instructions. (iii) Applying two coats of bituminous aluminium paint on top of APP membrane cover including testing on completion complete all as specified and directed.

M & L for excavation in post holes (or similar holes) in soft/ disintegrated rock n.exc 0.5 cum on plan and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance 50m.

M&L for cement concrete 1:2:4 type B2 (using 40mm graded aggregate) in foundation filling & mass concrete as in post.

S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. including distance pieces, cleats etc conforming to Fe-290 (Gde E- 165) complete all as specified.

Earth work in excavation by mechanical means (Hydraulic excavator) / in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil / rocks and disposal of surplus excavated soil as directed, within a lead of 50m as directed by Engineer-in-charge.

Returning, filling in soft/disintegrated rock including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified.

Removing excavated material exc. 50 m and n exc. 250 m and depositing where directed at a level n exc. 1.5 m above the starting point in soft/ disintegrated rock

Removing of excavated mtrls n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing outside MoD land complete all as specified and directed.

M & L plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate in foundations filling and mass concrete complete all as specified.

Extra for forming fair finished drain or channel 40 cm inner girth in cement concrete, using extra cement, including form work, moulds, mitred/stopped ends etc.

M&L for walling of porbandar stone squared rubble, brought up to course, well bonded, bedded and solidly hearted, built in CM (1:4) complete.

M&L for walling of Porbandar stone masonry well bonded and solidly hearted built in CM 1:6 complete all as specified .

M & L plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in coping etc complete all as specified.

M&L for rendering 15 mm thick on stone masonry surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete as specified and directed.

M&L for forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc.exc. 1.5 m and n.exc 7.5 m high from base complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry , built in cement mortar or cement lime mortar complete all as specified and directed.

M&L, Pre-cast cement concrete block masonry type C1 (1:3:6) using 20mm graded stone aggregate set in CM 1:4 with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and directed.

M&L, Rendering 15 mm thick on fair faces of brick, block masonry or concrete surfaces with in CM 1:4 on wall with water proofing component all as specified & directed.

M&L for providing and laying at or near ground level factory made kerb stone in repairs of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever reqd complete.

M&L for even spreading of 25mm thick layer of sand cushioning incl watering & consolidation all as specified & directed by Engineer-in-charge.

M&L for machine pressed precast concrete inter locking paver blocks in repairs any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new painted surfaces and applying two coat of synthetic enamel on brick, stone, concrete, asbestos cement or plaster surface all as specifed and directed.

Demolition and breaking up drain pipes 200mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar in floors including excavation and removal of soil complete all as specified and directed.

M&L for Concrete bed Type D2 1:4:8 to 200mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for 200mm bore reinforced concrete pipe class NP2 laid and jointed complete with collars all as specified and directed.

M&L for pre-cast reinforced cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in manhole cover with plain fair surface including chamfers, weatherings, throatings, necessary form work and set in CM (1:6), placed in position complete all as specified and directed.

M & L for Mild steel CRS TMT bars 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L Cutting into existing manholes of 150mm internal dia of pipes for connecting new drains, making good to pipe and rendering cutting out existing benching and forming branch channel in PCC (1:2:4) type B-1, smooth finished complete all as specified and directed.

Taking down carefully aluminum/copper point wiring (light, fans, socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulaters, socket etc and making good disturbed surface of wall/floor etc complete all as specified.

Ditto all as per above Item No. 151.00 above but for one 5 amps socket outlet on same board.

Ditto all as per above Item No. 151.00 above but for One 3 pin socket outlet, 5 Amps, independent borad complete all as specified andas directed.

Ditto all as per above Item No. 151.00 above but for One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size complete all as specified andas directed.

Ditto all as per above Item No. 151.00 above but for One 3 pin socket outlet with 2.5 sqmm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

Ditto all as per above Item No. 151.00 above but for one AC Point with 4 sq mm PVC unseathed (FRLSH) wire along with 4 sq mm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified & as directed by engr-in-charge. Note : Seprate circuit of individual point will be drawn from the DB directly for AC Point complete all as specified and as directed.

Supply and Repair/Replacement of ceiling rose surface backelite 65x50 mm having 3 terminal complete all as specified and directed..

M&L in repairs of SPN Sheet metal enclosures with plug and socket with Top and MCB SP 20 Amps including taking down the same. all as specified and directed by Engineer - in - Charge.

M&L for taking down and refixing for after Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and as directed.

M&L for taking down and refixing for after Painting of Exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and as directed.

M&L for taking down and refixing for after Painting of Geyser complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and as directed.

M&L for Repair/replacement of Flexi connection pipe accessory 450mm for water heater any type/capacity complete all as specified and directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as spcified and as directed

Supply and fixing in Repair/Replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete all as specified and as directed.

Supply and fixing in Repair/Replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

Supply and Repair/Replacement of Decorative wall light made up of high grade engineering plastic material suitable for retrofit CFL 20 W . with all connected accessories internally pre-wired, including 9 W LED bulb connecting lead of 3 core 1.5sqmm flexible copper wire 1.5sqmm from ceiling rose to fitting complete all as specified and as directed Make: Havells Cat Part No. LHFOGBE1TZ1W035 or equivalent in Crompton / Bajaj / Wipro.

Supply and Repair/Replacement of Building street light fitting Endura pearl 20W LED lamp new genaration energy saving & environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP65 protection and impect resistance of IK07,with suitable of GI pipe (light grade) bracket and clamps,nut bolts are fixed on wall/post and all as required and directed Make Bajaj cat no EBCLST20WLEDIV2 or equivalent in Crompton / Havells / Wipro.

Supply and fix of Integral LED aviation luminaire light comprising of aluminium housing with polycarbonate enclosure complete in highmast light in position by connecting the electrical connection and tightening the nut,bolts and clamps and all as specified and directed including taking down the u/s aviation light fittings.

Supply and Repair/Replacement of Building street light fitting Endura pearl 20W LED lamp new genaration energy saving & environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP65 protection and impect resistance of IK07,with suitable of GI pipe (light grade) bracket and clamps,nut bolts are fixed on wall/post and all as required and directed Make Bajaj cat no EBCLST20WLEDIV2 or equivalent in Crompton / Havells / Wipro.

Supply and fixing of electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and Repair/Replacement of Modular switch 1 way 6 Amps, 1 modules 230 volts complete all as specified and directed.

Supply and Repair/Replacement of Modular switch 1 way 16 Amps, 1 modules 230 volts Complete all as specified and directed.

Supply and Repair/Replacement of Modular socket 6A, 2/3 pin combined, 2 modules 230 volts complete all as specified and directed.

Supply and Repair/Replacement of Modular socket 6A/16A, 2/3 pin combined, 2 modules 230 volts complee all as specified and directed.

Supply and Repair/Replacement of bell push 6 Amps, 1 modules 230 volts complete all as specified and directed.

Supply and Repair/Replacement of call bell Multi musical type complete all as specified and as directed

Supply and Repair/Replacement of five step fan Modular regulator 2 module 230 volts complete all as specified and directed.

Supply and Repair/Replacement of MCB DB Single pole and neutral 12 way 240V double door Complete all as specified and as directed.

Supply and Repair/Replacement of MCB TPN DB 4 way 415V double door Complete all as specified and as directed.

Supply and Repair/Replacement 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity SP 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by Engineer - in - Charge.

Supply and Repair/Replacement Supply and fixing SPN 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer - in - Charge.

Supply and Repair/Replacement of 63 amp TPN 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed by Engineer - in - Charge.

Supply and fixing inreplacement of TP&N distribution board with double door vertical type TPN DB made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating,suitable for MCCB for capacity 63Amp, 16 KA, Incomer 4 ways 415 Volts made up of CRCA sheet with busbar rating 100 Amps Adjustable thermal (70% to 100%) & Fixed magnetic setting type including grouting in the wall, cutting & chasing etc complete all as specified and directed by Engineer - in - Charge.

Supply and Repair/Replacement of MCCB 100 amp 50 Hz, 415 V with rupturing capacity 25 KA for fixed in existing panel & DB complete all as specified and as directed by Engineer - in - Charge.Make - Havells Catpart No. IHLGHF0100# or equivalent to L&T/ Legrand

M&L and Repair/Replacement of fabrication of Wooden Box as suitable for SPN 4 way to 12 way DB to be covered as per existing including suitable mason work,surface finishing as per original and locking system (for 02 Nos of DB) complete all all as specified and as directed.

M&L and Repair/Replacement of fabrication of Wooden Box as suitable for TPN DB to be covered as per existing including suitable mason work,surface finishing as per original and locking system complete all all as specified and as directed.

M&L in Replacement of earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to galvanised earth lead wire 4.0mm dia by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways all as shown in electrical plate No. 3 of SSR Part-I all as specified and directed.

M & L for Making connection of CPVC pipe distribution branch with GI main of 80/100mm dia size by providing and fixing tee including cutting and making fusion joint etc.

Supply Repair/Replacement Laying and Testing of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fittings and making connection fixed complete to walls, ceilings floors or laid in trenches etc. of 40 mm dia laid in trenches complete all as specified and directed.

Ditto all as per above Item No. 192.00 above but for 32 mm dia.

Ditto all as per above Item No. 192.00 above but for 25 mm dia.

Ditto all as per above Item No. 192.00 above but for 20 mm dia.

Supply and Repair/Replacement of CPVC ball valve valve 40 mm bore complete all as specified and directed.

Supply and Repair/Replacement of CPVC ball valve valve 32 mm bore complete all as specified and directed.

Supply and Repair/Replacement of CPVC ball valve valve 25 mm bore complete all as specified and directed.

Supply and lay Double Walled Corrugated (DWC) Pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS14930 (Part-II) for protection of UG cables size 50 mm outer dia laid in trenches/ road/ drain or fixed along wall, poles or laid under floor all as spd and as directed by Engr-In-Charge.

Supply and lay Double Walled Corrugated (DWC) Pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS14930 (Part-II) for protection of UG cables size 40 mm outer dia laid in trenches/ road/ drain or fixed along wall, poles or laid under floor all as spd and as directed by Engr-In-Charge.

Supply, laying and testing in Replacement of XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and as directed.

Supply, laying and testing in Replacement of XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and as directed.

Supply, laying and testing in Replacement of XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core complete all as specified and as directed.

Supply and Repair/Replacement of hot press moulded SMC junction box door fixed with left side hinged inside dimension of 240x130x95 mm Fixed with cable terminals with one number of 40 Amp TPN MCB incl fixed on pole with clamp nuts,bolts etc complete all as specified and directed by Engineer-in-charge.

shree chamunda enterprise (BID ID -3464181)

JAY BHARAT METAL SUPPLIERS (BID ID -3465312)

SANVI ASSOCIATES (BID ID -3468062)

SURESH ELECTRICALS (BID ID -3466169)

K B N TRADERS (BID ID -3467416)

m/s prakash enterprise (BID ID -3466855)