Upgradation/Establishment of Weavers Craft Centre at Daporijo in Upper Subansiri District.

Amount

SH-1: For Building Construction (G+1) :: Dismantling Works

Demolishing cement concrete 1 : 3 : 6 or richer mix including disposal off material within 50 metres lead.

Demolishing RCC work including stacking of steel bars and disposal of un-serviceable materials within 50 metres lead.

Demolishing brick work in cement motar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Removing mortar from and cleaning bricks (Stacks of clean bricks shall be measured): (c) From brick work in cement mortar.

Dismantling wood work of sectional area 40 Sq.cm. and above wrought, framed and fixed in frames, other frames and trusses including stacking the material within 50 m lead.

Dismantling Gl sheet roofing including ridges, hips, valleys and gutters etc and stacking the material within 50 m lead

SH-2: For Building Construction (G+1) :: Earth Work

Earth work in excavation in saturated soil upto a depth of 61 cm including pumping or bailing out water and banking in 20 cm layers for the purpose of making embankments or filling up ground depressions, lead upto 50 m and lift upto 1.50 m.

SH-3: For Building Construction (G+1) :: Concrete Work

Providing and laying in foundations plinth cement concrete 1 : 3 : 6 (1 Cement : 3 coarse sand : 6 graded stone agtgregate 40 mm nominal size) excluding yhe cost of centering and shuttering.

SH-4: For Building Construction (G+1) :: RCC Work

Centring and shuttering including strutting, propping etc and removal of form work for :

a) Foundation, footings, bases of columns etc. and mass concrete.

b) Column, pillars, posts and struts etc.

c) Lintels, beams, girders,bressumers and cantilevers etc.

d) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).

e) Stairs (excluding landings) except spiral stair cases.

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)

Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement : a) M25 (1 cement : 1 coarse sand : 2 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete in stairsase (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with 1 : 2 : 4 (1cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).

Reinforcement of RCC work including bending, binding and placing in position complete: a) Tar/TMT steel

SH-5: For Building Construction (G+1) :: Brick Work

Brick works with best available local bricks in foundations and plinth in cement mortar 1 : 4 (1 cement : 4 fine sand).

Extra for brick work with best available local bricks in superstracture above plinth level upto floor two level.

SH-6: For Building Construction (G+1) :: Wood Work

Providing approved best available local wood (Class-B II) Work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.

Supplying and fixing factory made panelled shutters made out of best available hard wood for doors including panelling with panels 12mm thick commercial veneered reak wood particle boards( Phenyle Bonded) 3 layers flat pressed including applying one cost of approved wood primer: (a) 40mm thick including anodized aluminium butt hinges with necessary screws.

Providing and fixing aluminium Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc. complete.

Providing and fixing aluminium sliding door bolts anodised transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing aluminium Handles anodised transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embedding in cement concrete blocks 30 x 20 x 25 cm in 1 : 3 : 6 ( 1 cement : 3 sand : 6 hard stone singal 40 mm nominal size).

Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.

b) Ornamental grill.

Providing & fixing MS Hooks and Eyes.

SH-7: For Building Construction (G+1) :: Steel Work

Providing and fixing MS fan clamp type 1 to 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.

SH-8: For Building Construction (G+1) :: Flooring Work

Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement :

a) 25 mm thick

Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, including rounding of junctions with floor.

a) 18 mm thick

SH-9: For Building Construction (G+1) :: Finishing Work

15 mm cement plaster 1 : 3 (1 cement : 4 fine sand) on the rough side of single or half brick wall.

12 mm cement plaster 1 : 3 (1cement : 4 fine sand).

Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.

Distempering with dry distemper of approved brand and manufacture (two or more Sqm coats) and of required shade on new work including priming coat of whiting to give an even shade.

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.

White washing with whiting on new work (three or more coats) to give even shade.

SH-10: For Building Construction (G+1) :: Miscelleneous Work

Providing and fixing local wooden railing 0.75 m high with 7.5 x 5 cm top and bottom rails 7.5 x 5 cm sides and 5 cm x 5 cm intermediate vertical bars placed at 22.5 cm centre to centre including painting two or more coats as directed.

Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.

Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing,balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

SH-11: For Building Construction (G+1) :: Carriage

Loading and unloading of stone boulder / stone aggregates / sand / kankar/ moorum. (Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, excluding time for haulage and return trip).

Loading and Unloading of Cement or Steel by Manual Means and stacking.

SH-12: Water Supply, Sanitary Installation & Electrification Works

Internal water supply and sanitation installation Works

Internal Electrification

External service connections

SH-13: Boundary Wall Construction

Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m : b) Hard Soil.

Excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil as directed, within a lead of 50 m : a) Ordinary Rock.

Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth.

Reinforcement of RCC work including bending, binding and placing in position complete : (a) Mild Steel.

Centring and shuttering including strutting, propping etc and removal of form work for :

c) Lintels, beams, girders,bressumers and cantilevers etc.

b) Column, pillars, posts and struts etc.

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)

Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Half brick masonry (with best available local bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) in foundation and plinth.

12 mm cement plaster 1 : 4 (1cement : 4 fine sand).

15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.

Painting two coats with oil type wood preservative of approved brand and manufacture on new work.

Wall painting (two or coats) with plastic emulsron paint of approved brand and manufacture on new work to give an even shade.

Loading and unloading of stone boulder / stone aggregates / sand / kankar/ moorum. (Placing tipper at loading point, loading with front end loader,dumping, turning for return trip, excluding time for haulage and return trip).

Loading and Unloading of Cement or Steel by Manual Means and stacking.

Cost of Haulage Excluding Loading and Unloading : Unsurfaced Graveled Road.

Cartage of Engineering Materials by mechanical transportation from:

a) Sand (1 cum sand equals to 1.53 MT)(Quary to worksite = 21 km)

c) Cartage of bricks by mechanical transportation from Banderdewa to Daporijo = 310 Km

Providing and fixing M.S Gate

M/S L.Y ENTERPRISES (BID ID -6636)