NIT No-14 EE (SDW) II/ (23-24) Item No. 02

Isolating the PST from inflowing and out flowing channel by closing sluice gate and providing gunny bags to ensure no flow in the PST. Dewatering the stagnant water from the PST with the help of submersible pump. Cleaning the site manually for execution the work.

Dismantling of motor, Primary gear box and other mechanical fixtures from the top of centre mechanism and shifting to workable safe place.

Dismantling all the gears in turn table after removing the Brocken bearings form the gears and wheels

Dismantling the all worn out angle iron, scrappers, and damaged portion of the drum by cutting nut & bolt with the help of Gas cutter, man power, and labour as per site requirement / strategy.

Overhauling of central gear box by machining of worm and gears as per site requirement.

Providing & Fixing of bearings Numbers. (1) 22218 – 2 Nos. (2) 22219 – 4 Nos. (3) 6411 – 2 Nos. (4) 6312 – 2 Nos. (5) 6205 – 2 Nos. (6) 6209 – 2 Nos. Make: FAG/SKF/DJB approved make.

Fixing the wheel and gears and above bearing in the turn table and oil seals as per required size on the site.

Providing of set of scrapper arms comprising of arms, made out of M.S. angle iron size 65 x 65 x 8mm, 323 Kg, 75x75x8mm, 561 Kg., 50x50x6mm, 168 Kg. aprx. and Vertical channel size 150x70x6mm, 258. Appx. of main arm as per sample.

Providing the damaged and rusted scrapper of M.S sheet 8 MM approx. 2 meter length X 10 inch width with moulded as per sample approx and making hole for fixing with the nut bolt as per sample for replacement the scrapper at site as per requirement.

Fixing the above scrapper arm and scrapper with the welding machine, gas cutter and tool & tackles etc as per site requirement.

Repairing of damaged vertical structure of central drum, M.S. angle iron as per required and 75x75x8mm (Approx. 25mtr). By welding & providing nut bolt etc as per requirement at site.

Repairing of centre drum by patch work using 5mm thick M.S. sheets and homogenous electric and welding i/c replacement of the damaged stiffeners of the drum with the help of electric welding by providing of size 50x8mm M.S. flat as per site requirement. The job also includes replacement of the damaged portion of the drum and restringing with 50x50X8mm angle iron fixed on the top and bottom of the drum with the help of electric welding.

Providing and fixing of MS Chequred sheet 8 mm thickness for bridge platform of as per site requirement. Approx 25 Sq. Mtrs.

Providing of different type M.S. Angle Iron of size 65 x 65 x 6 mm. approx 974 kg, size 75 x 75 x 6 mm approx 893 Kg size 50 x 50 x 6 mm approx 479 Kg, size 125 x65 C channel approx 538 Kg & 150 x75 mm C Channel 1292 Kg approx. or size as per site requirement for strengthening of bridge complete in all respect as per required.

Cutting/dismantling of old and rusted worn out scum box i/c out let pipe etc. with all tools & tackles.

Fab./Providing of scum box with sizes 1800 x 1500 mm made out from 6 mm thick MS sheet with provision of slope as per existing.

Providing of SS Tie Rod of size 5/8” dia x length 5 Mtrs. Apprx.

Fixing of above Tie Rod at both side of central drum for holding the scrapper arms with adjustment assembly.

Alignment of the complete structure after assembling fixing the above material with the provision of weight to align the same.

Providing of Red Oxide Metal primer( approx. 10 drum 20 litre each) Black Enamelled.( 15 drum 20 litre each) Orange enamelled paint (5 drum 20 litre each) Make: -Asian/ Nerloc/ Burger.

Painting the complete structure after removing the rust with the wire brush and putting one coat of epoxy primer and two coats of epoxy paint etc.

Replace of Gear Oil. Servo-40 in the central mechanism as well in reduction gear boxes.

Testing and commissioning of complete PST with all auxiliary material as lowering/ lifting tools and tackles.

Shakti Trading Co.