SITC of Exhaust system to the Gold Malam near Sri Govindaraja Swamy Temple, Tirupati

Part - A portion (AE-VJA section)

Attend the following activities in AE-Vijayawada juridiction (Sri Venkateswara swamy Temples, Kalyanamandapams and Institutions etc.,) for a period of 1year. (4 Nos / 12 Months)

(a). Switch ON/OFF the lights & Fans and Check the lights/ street lights/fans and all electrical equipments and the same is put in working condition, any lights/ fans etc., are not functioning the same is to be replace with new one. Note: The materials is to be arranged by the department.

(b). Switch ON/OFF the centralized AC system in the above Kalyanamandapam without fail and observed the cooling effect in the said place . Incase, there is no effective cooling the same is to be intimate to the concerned for rectification.

(c) Attend the emergency electrical works in the temple, Vedapatasala and Schools and hostels and the same is to rectified and put the system in working condidtion.

(d). Switch on the DG set when main supply failures and switch off the same when the main supply restored and enter the Electrical parameters, Diesel consumption, DG ON and OFF times in a separate register for verification of the TTD officers.

(e) Check the DG set, changeover, diesel oil, battery,etc in every day and put the same in working condition.

(f).Put the water in to all earth pits every day in the above temple without fail.

(g) cleaning of ceiling fans, lights etc., when ever required and put the same in neat and clean.

(h). computer applications like preparation of statements, estimates, work slips, EMD & FSD Bills, correspondence letters, etc., The above said persons will be located at Tirupati office head quarter.

Note: 1. The above work required for Semi skilled work mans for 2 shifts- i.e. 9 AM to 6 PM, 6 PM to 9 AM = 2 nos x 2 locations = 4 nos

( Rupees Ten lakhs fourteen thousand and eighty four only)

SCHEDULE (To be quotated by the bidder)

SERVICE CHARGES

Attend the following activities in AE-Vijayawada juridiction (Sri Venkateswara swamy Temples, Kalyanamandapams and Institutions etc.,)

Service charges towards deployment of man power for non migrated existing workers for a period of 11 months.

Service Charges for man power deployment shall be minimum of Rs.500/- / month per person and maximum of 5% of the basic wages for corresponding worker. Any tender with values excess of 5% of basic wages or less than Rs.500/month will be rejected summarily.

The above mentioned number of persons is inclusive of off duties for 11 months

the tenderer shall quote his offer for above considering all the activities indicated in the scope of work including labour force to be deployed by the tenderer for the satisfactory service levels including transportation, taes and overheads etc., as applicable and required for satisfactory performance of the contract.

Initially for one month, the contractor has to pay wages including ESI, EPF, etc., and as per the wages in Schedule-A in the tender document duly certified by the Charted Accountant. The same procedure shall be continued for subsequent months also.

Employer contribution of ESI & EPF as applicable at the prevailing rates per worker per month shall be paid

for wages more than ₹15,000/-, EPF @ 13% & ESI @ 3.25 % shall paid on ₹15,000/- only

Whenever, there is enhancement of wages, the same to be implemented as the same will be reimbursed by TTD

Only persons belong to Hindu Religion shall only be engaged.

TTD will not provide any accommodation for their workers during maintenance period and they will not be permitted to stay at site / premises after completion of shift duties. It is the responsibility of the contractor/firm to make alternate arrangements for transport and accommodation to their workers / staff away from the premises.

The price quoted shall be excluding of GST.

TTD shall be authorized to deduct any taxes as applicable from the bidder

Monthly: The following documents should be furnished by the contractor for arranging monthly payment

a) Documentary evidence that payment is made to personnel through their bank accounts.

b) ESI, EPF payment challans of the preciding month where TTD has reimbursed the employeer contribution of ESI & EPF

d) GST payment challans/invoice of the month / Quarterly as the case may be since the rate quoted should be inclusive of all taxes applicable.

SCHEDULE-A (Not to be quotated)

Part - A: Work Portion (Minimu Wages of AE-VJA section)

Attend the following activities in AE-Vijayawada juridiction (Sri Venkateswara swamy Temples, Kalyanamandapams and Institutions etc.,) for a period of 1year. (4 Nos of Non Migrated persons for 11 Months)

(a). Switch ON/OFF the lights & Fans and Check the lights/ street lights/fans and all electrical equipments and the same is put in working condition, any lights/ fans etc., are not functioning the same is to be replace with new one. Note: The materials is to be arranged by the department.

(b). Switch ON/OFF the centralized AC system in the above Kalyanamandapam without fail and observed the cooling effect in the said place . Incase, there is no effective cooling the same is to be intimate to the concerned for rectification.

(c) Attend the emergency electrical works in the temple, Vedapatasala and Schools and hostels and the same is to rectified and put the system in working condidtion.

(d). Switch on the DG set when main supply failures and switch off the same when the main supply restored and enter the Electrical parameters, Diesel consumption, DG ON and OFF times in a separate register for verification of the TTD officers.

(e) Check the DG set, changeover, diesel oil, battery,etc in every day and put the same in working condition.

(f).Put the water in to all earth pits every day in the above temple without fail.

(g) cleaning of ceiling fans, lights etc., when ever required and put the same in neat and clean.

(h). computer applications like preparation of statements, estimates, work slips, EMD & FSD Bills, correspondence letters, etc., The above said persons will be located at Tirupati office head quarter.

Note: 1. The above work required for Semi skilled work mans for 2 shifts- i.e. 9 AM to 6 PM, 6 PM to 9 AM = 2 nos x 2 locations = 4 nos

SITC of Exhaust Hood Made of SS304-20 G (1.0 MM) Mat finish and Grease Filters for RESIDUAL SOOT/ASH with Pivot Hinged construction for ease of cleaning and cut out suitable for fixing Volume control dampers. Size of the Exhaust hood 1050 mm Width X 2400 mm Length X 600 MM Back Height and 300 MM Front for the HEAD ROOM. Filter Frame Shall be of 1.2 mm thick SS304 and Baffles shall be of 1.0 mm SS304. Make : PLUS VENTILATION PVT LTD/HAS/SYSTEMAIR

Supply, installation, testing and commissioning of CENTRIFUGAL FAN SINGLE INLET with BACKWARD CURVED IMPELLER Suitable for handling EXHAUST FUMES. The air qty and static is sufficient to handle the ducting arrangement Fan Capacity 8640 CFM at TP 60 MM. Design to ensure that the exhaust fumes are not in contact with motor. The Motor Sahll be Provided with Motor Guard for Monkey Protection. Make of Fan : NICOTRA / HAS / KRUGER / SYSTEMAIR-DESIGN BASED ON TECHNICAL DATA SHEET OF M/S NICOTRA Gebhardt. Make of Motar : KIRLOSKAR/CG/SIEMANS OF IE3 GRADE

Supply and fixing of starter panel fabricated with 16 SWG CRCA sheet steel with 7.5 HP DOL starter and incoming control 32 AMPS MCCB and Multifunction Digital meter and 3Phase indication lamps etc, along with Auto/Manual Selector Switch Option for Auto Restart feature in the event of power failure and resumption. ELECTRICAL SWITCH GEAR SHALL BE OF L and T/ SCHNEIDER

Supply and Installation of Anti Vibration foot Mounts comprising of Set of 6 Nos with Loading Range of 100-300 Kg per each Mount. Make: DUNLOPE/TECHNOCAB/RESISTOFLEX / ALTERNATE

Supply and Installation of Damp & Heat Resistance canvass Connection with GI Strip Flanges

Supply and installation of V-Belts for Pulley Drive arrangement with Tapper lock pulleys and Fixing of Belt Guard for Safety and Monkey Protection

Volume control dampers for the Exhaust hoods GI 20 G FRAME AND 18 G BLADES

Pre Designed and Factory Fabricated 20 Gauge Ducting Made of 120 GSM with TDF 35 mm Flanges. GI SHEET SHALL BE OF JINDAL/AMNS/TATA

Pre Designed and Factory Fabricated 22 Gauge Ducting Made of 120 GSM with TDF 35 mm Flanges. GI SHEET SHALL BE OF JINDAL/AMNS/TATA

Supports/Auxillary Materaisl and Consumables for EX Hoods

Outlet Canopy of size 660mm x 660mm with Bird/Monkey Entry Protection Mesh

Supply and Transportation of XLPE/PVC insulated & PVC sheathed armoured cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 etc., complete. Make: Torrent/Universal /Unicab/ Havells / KEI /Polycab/Gloster/Orbit/ Paragon/RR Kabel/RPG /Rhino /Pawancab/AKG/LS cable/ Polywires. 3C x 4 sq.mm

Supply and laying of following sizes Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, riveting, soldering, saddles, making connection etc as required 25mm x 3mm GI Flat (0.656 Kgs/Mtr)

Supply, transportation & installation of following sizes of Hot Dipped Galvanized Iron ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders and etc., complete. 150mm x 50mm x 2.0mm

Commissioning and Testing of the Exhaust system