Two phase erection of 440 volt O/H line from kuju new siding to PM 10 analyser room for uninterrupted power supply and re- strengthening of Topa OCP under Kuju Area.

Amount

Erection of pole of following length in cement concreate 1:3:6(1cement:3coarse sand:6graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as req.above 10.00 metre and upto 12.00metre

Supplying and erection of galvanised ‘D’ iron clamps complete with shackle insulator (100 mm X 110 mm), G.I. bolts, nuts and washers, coach screws etc. as required.

supply of G.I. wire

Erection of G.I. wire no.8 SWG including blinding etc. as req

Erection of ACSR conductor of 7/2.11mm to 7/3.00mm diameter and above including binding etc.as req

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required.

Supplying and erection of bow stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and also with 0.6 m long brace of size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulley fixed at one end of the brace as required.

Total impact of GST for the purpose of CTC

M/s Achal Electricals

Maa Katyayani Enterprises