REPAIR TO FLOOR WALL SANITARY FITTINGS JOINERIES CLEANING OF OVERHEAD TANKS, INTERNAL WATER SUPPLY AND CERTAIN MISC WORK TO MD ACCNS BLDGS IN DERA COMPLEX VARSHA VARUNA TARANGINI FERNSONS DAWSON VIHAR APARTMENTS AND DAD COMPLEX AT SATALITE AREA IN K

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish outside MD land complete all as specified and directed.

M&L for glazed ceramic coloured designed straight edge tiles 7mm thick area of tiles exc 0.06 Sqm and n exc 0.18 Sqm on vertical surfaces such as skirting or dados laid over cement mortar backing coat set and jointed with neat cement slurry and pointed in white or coloured cement to match incl Rendering in CM 1:4, 10mm thick complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm on floors laid over cement mortar screeding set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles incl 15mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.38 Sqm in floor including 15mm thick cement screed bed in CM 1:6 and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

S&F Vitrified tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed.

S&F Vitrified tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm, in vertical surfaces as skirting / dado including 10mm thick cement plaster 1:4 and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate as in levelling course to floors complete all as specified and directed.

Demolition of brick work/ stone /boulders built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed.

M&L pre cast cement concrete block masonry 1:3:6 with solid blocks exc 10 cm in width and setting in CM 1:6 complete all as specified and directed.

M&L for precast cement concrete louvers and jallies, 50 mm thick, type B0 1:2:4 (12.5 mm graded stone aggregate) including all mouldings but excluding frame set in CM 1:6 complete all as specified and directed.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for chequered cement concrete tiles 25 cm x 25 cm x 25 mm thick set in neat cement slurry with grey cement and pigments laid over and including 20 mm thick screed bed in CM 1;6 and including taking down old tiles complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (EWC), any colour, pedestal pattern and connecting to trap complete all as specified and directed.

S&F in repairs Plastic seat cover, any colour closed pattern with flat bottom & cover and mild steel chromium plated or aluminium hinges, etc including fixing bolts complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern 5 ltr capacity, low level, any colour, with inlet ball valve, float and handle including brackets and all connections complete all as specified and directed.

S&F in repairs PVC connection 15mm bore 45cm long with brass coupling complete all as specified and directed.

S&F in repairs white glazed vitreous china WHB flat back size 550x400 mm including CI bracket etc incl PVC waste pipe 40mm bore 90cm long with coupling spring type complete all as specified and directed.

S&F in repair vitreous china urinal bowl flat back of size 465 X 355 X 265mm white along with waste coupling including fixing plugs, bedding urinal against wall in CM 1:2 securing urinals to plugs including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F in repairs 100 mm dia stainless steel grating complete all as specified and directed.

S&F in repair of Brass Chromium plated waste coupling 32 mm dia suitable to WHB complete all as specified and directed

S&F in repair 32 mm dia size PVC waste pipe with cup head for Wash Hand Basin / sink complete all as specified and directed.

M&L in repair PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair stainless steel sink with draining board made out of 1mm thick sheet kitchen or laboratory with plugs, washers including bedding lime cement mortar to dwarf wall or including fixing cantilever brackets fixed to wall and connecting union to pipe overall size 915x460x203mm bowl size 405x354x203 mm including waste coupling and waste pipe complete all as specified and directed.

S&F in repair pillar taps, brass, with capstan heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair tubular towel rail 20mm dia brass chromium plated with brackets 60cm long complete all as specified and as directed.

S&F in repairs CP health faucet including 1m long flexible pipe and fittings complete all as specified and as directed.

M&L for cutting grinding of terrazzo tiles or kota stone floor etc with grinding machine after filling the pits and holes with matching cement and polishing with 3 step grinding stone complete on floor/ vertical surface of wall dado, skirting etc complete all as specified and as directed.

S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

Taking down rainwater pipe, eaves gutter and AC vent pipe of any size including AC gutters, etc incl all fittings complete all as specified and as directed.

M&L for PVC eaves gutter heavy duty with half round 200mm dia complete all as specified and as directed.

M&L for PVC(SWR) junctions (single T) equal or unequal to fit 200mm bore eaves gutter, top portion half round and bottom portion to fit 110mm bore PVC pipes complete all as specified and as directed.

S&F PVC(SWR) pipe single socketed in any length with rubber ring joints fixed to wall 110mm bore complete all as specified and as directed.

S&F PVC(SWR) pipe single socketed in any length with rubber ring joints fixed to wall 75mm bore complete all as specified and as directed.

S&F PVC(SWR) bends any radius to fit to 110mm bore pipe with access door complete all as specified and as directed.

S&F PVC(SWR) bends any radius to fit 75mm bore pipe with access door complete all as specified and as directed.

M&L cover fillets of 3mm thick standard hard board 20mm thick fixing with screws complete all as specified and as directed.

PVC(SWR) branch piece, single (Single Y ) equal or unequal 75mm bore complete all as specified and as directed.

PVC (SWR) branch piece, single (Single Y ) equal or unequal 110mm bore complete all as specified and as directed.

PVC (SWR) junction single, (Single T ) equal or unequal 75mm bore complete all as specified and as directed.

PVC (SWR) junction single, (Single T ) equal or unequal 110mm bore complete all as specified and as directed.

Taking down chowkats n.exc 1.5 Sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed.

All as per Item No 43 above but area exc 1.5 Sqm but n.exc 4 Sqm complete all as specified and as directed.

Taking down shutters of any description n.exc 1 Sqm each complete all as specified and as directed.

All as per Item No 45 but exc 1 Sqm but n.exc 2 Sqm each complete all as specified and as directed.

M&L 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

M&L 2nd class HW 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L 2nd class HW 30mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (B); supplied and fitted to chowkats complete all as specified and as directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty or fitted with beads not exceeding 0.50 Sqm. complete all as specified and as directed.

Repairs to shutters without taking down of any description exceeding 1.0 Sqm and not exceeding 2 Sqm including resecuring or easing and adjusting in same opening complete all as specified and as directed.

S&F 4mm thick Sheet glass one side frosted, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F in repair 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed .

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed .

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick with particle board(stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

M&L for repair (only) to aluminium doors of size n.exc 2 Sqm and making good and functional including changing of pivot, repairs to lock,handle,rubber beadings complete all as specified and as directed.

M&L for repair (only) to aluminium window of any size, pattern and any number of shutter & making good and functional including changing of pivot,repairs to lock,handle,rubber beadings etc complete all as specified and as directed.

M&L PCC 1:2:4 type B-1,using 20mm graded stone aggregate for fixing holdfast including necessary form work complete all as specified and as directed.

S&F MS holdfast made out of FI 25x3mm complete all as specified and as directed.

S&F 200mm long Aluminium anodised barrel tower bolt complete all as specified and as directed.

S&F 100mm long Aluminium anodised barrel tower bolt complete all as specified and as directed.

S&F 250mm long Aluminium anodised sliding door bolt complete all as specified and as directed.

S&F 125mm long Alum anodised handle complete all as specified and as directed.

S&F 100mm long Alum anodised handle complete all as specified and as directed.

S&F 100mm MS butt hinges, medium grade cold rolled complete all as specified and as directed.

S&F 100mm stainless steel butt hinges, complete all as specified and as directed.

S&F 75mm stainless steel butt hinges, complete all as specified and as directed.

S&F Continuous (Piano hinges 30 cm width of flaps) MS, bright finish or electro galvanised complete all as specified and as directed.

S&F in repairs 375mm mild steel, ordinary rat tail pattern springs including roller and plate complete all as specified and as directed.

S&F in repairs mortise lock vertical type, size 75mm 2 levers brass complete all as specified and as directed.

S&F in repairs 40mm dia, brass cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed.

S&F hasp and staple 100mm, safety type aluminium anodised with hungers incl bolt to hinges plate and fixed with screws complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring 140mm complete all as specified and as directed.

S&F in repair flush valves syphon set complete internal for flush tank 10 Ltrs capacity push button for single layer for PVC flush complete all as specified and as directed.

All as per item No 77 above but Dual type

Taking down cement plaster from Brick/Concrete wall and ceiling including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for rendering 10mm thick on brick or concrete wall surfaces with cement mortar (1:4) and WPC @3% by weight finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of ceiling surfaces finished even and smooth complete all as specified and as directed.

M&L for rendering 10mm thick on brick or concrete wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed. Note:- The WPC shall be measured and paid separately. The dosage of WPC shall be as directed by the manufacturer.

M&L for Liquid water proofing compound complete all as specified and as directed.

M&L preparation of new decorated surfaces of walls (plastered or unplastered) including cornices and applying three coat of white wash on ceiling complete all as specified and as directed.

M&L preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of new decorated surfaces of walls (plastered or unplastered) including cornices and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

Destruction of growth of weed plants with roots from the roof top of bldgs. and vertical surfaces of walls of buildings at any position and height, by completely removing the growth and applying 2.40 'D' oil mixed with weedicides or mixed with Veedol chemical solution and sprayed on and around roots and at places of possible growth of weeds and making good damaged surfaces by plastering, pointing in cement mortar 1:4 or PCC 1:3:6 including provision of necessary scaffolding complete all as specified and directed by Engineer-in-Charge

Repairs to shutters without taking down of any description not exceeding 1.0 Sqm including resecuring or easing and adjusting in same opening complete all as specified and as directed.

S&F in repair 2nd class hard wood, small fittings such as brackets of any type latch and hinge blocks, shaped door and windows stops and the like including all necessary labours articles not exceeding 200 Cu cm each complete all as specified and as directed.

S&F in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

M&L 18 to 20 mm thick machine cut polished granite 1st quality "black" stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface in floors, aprons etc laid, bedded and pointed in any mortar including grinding and moulding of exposed edges of granite and making hole for gas pipe including dismantling of existing stone slab and tiles of any description or thickness complete all as specified and as directed. (Sample of granite should be passed by GE before execution of work)

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated guard and railing size 60cm long (with brass bracket) complete all as specified and as directed

S&F in repairs, corner glass shelf of 5mm thick plain sheet glass (one tier) and with brass, chromium plated bracket complete all as specified and as directed.

Dismantling of Wall or ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc , keep in safe custody for reuse complete all as specified and as directed .

S&F seamless false ceiling consisting of 4mm thick Non asbestos fibre cement building boards, suspended on GI frame work comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with and incl GI hangers 6 mm dia (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long incl applying two coats of oil emulsion distemper over a coat of primer including necessary scaffolding complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including nainital or similar pattern roof covering complete all as specified and as directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Roof trusses (framed) confirming to Fe 410W, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed

Cleaning / removing vegetation growth over MP Tiles roof / RCC roof/ chajja etc up to two story and removing debris off the premises complete all as specified and as directed.

M&L in repairs 6mm thick veneered decorative plywood, Grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nail to timber frame work complete all as specified and as directed.

S&F Aluminium powder coated sliding type window with 4mm thick plain sheet glass including provision of airtight heading and handling arrangements complete with using following section complete all as specified and as directed:- (i) Outer frame 50.80x25.40x1.5mm (ii) 3 Track frame 43.66x22x1.22mm (iii) Shutter frame 31.80x14.50x1.20mm (iv) Shutter interlock 31.80x20.50x1.20mm Note:- 4mm thick Glass pane and stainless steel wire netting shall be measured and paid separately.

S&F in repairs aluminium powder coated frame work for partition (area of panel not exceeding 1.50 sqm each) with out sash bar, including all necessary jointing leats,hold fasts, hinges with fixing clips, rubber gasket, anodised snap beading, anodised aluminium fittings, locking arrangement etc (minimum thickness of powder coating 50 micron). Section used for partition is catalogue No 9223 of size 63.58x38.10x2.00 mm (single partition vertical &horizontal sections) of Hidalgo or equivalent make as approved by GE including provn of glass pane, 12mm thick prelaminated particle board with decorative choice lamination on both sode complete all as specified and as directed. Note:- The cost of 4mm thick Glass pane and 12mm thick prelaminated particle board with decorative choice lamination on both sode shall be included in the quoted rate.

S&F in repairs aluminium powder coated frame work for door without sash bar, including all necessary jointing cleats, hold fasts, hinges with fixing clips, rubber gasket, anodised snap beading, anodised aluminium fittings, locking arrangement etc (minimum thickness of powder coating 50 micron). Section used for door are catalogue No 9258 of size 50x44.50x1.80 mm door vertical stiles, catalogue No 9286 of size 50x45x1.50 mm door Top and middle /lock rail, catalogue No 9246 of size 100 x44.50x1.85 mm door bottom rail, of Hindalco or equivalent make as approved by GE complete all as specified and as directed .

S&F in repairs 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed .

M&L for 5 mm thick sheet glass, ordinary quality fixed with glazing clips/aluminium cleats in square n.exc 0.50 sqm in each pane all as specified complete all as specified and as directed .

S&F in repair pillar taps, brass, with capstan heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair grating doom 100 mm dia complete all as specified and directed.

M&L for 2 mm thick High Performance Modified Self-Adhesive Membrane SBS (Styrene Butadiene Styrene) based waterproofing membrane with high density polyester film on one side and easy-to-peel silicon film on the other side on roof including cleaning and preparation of surface including removal of old treatment and disposal of the old item to outside MD land complete all as specified and directed.

M&L for water proofing treatment by applying oil bound bituminous primer 0.20 kg/sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4 kg/sqm, reinforced with non-woven polyester matt not less than 160 g/sqm, having softening point not less than 1400 C longitudinal tensile strength not less than 650 N/Sqcm tearing strength of 180 N by torque application including minimum 10 cm side overlap and 15 cm end lap and applying a coat of blown grade hot bitumen 85/25 conforming to IS : 702 heated to a working temp of 180 degree and applied @1.2kg/Sqm finishing the surface with solar reflective bituminous aluminium paint @ 100 g/sqm including demolition of cement concrete any description and in any position, complete all as in follows steps:- (a) 25mm thick PCC :2:4 type B0 as in padding finished even and smooth. (b) 10mm thick plaster in CM mortar1:4 with using WPC and finished even and smooth w/o using extra cement (c) Application of oil based bituminous primer @ 0.20 kg/sqm,. (d) Application of 85/25 conforming to IS : 702 @ 85/25 @ 1.20 Kg/sqm (e) Laying of 4 mm thick APP modified water proofing membrane weighing not less than 4 kg/sqm (f) Application of 85/25 conforming to IS : 702 @ 85/25 @ 1.20 Kg/sqm (g) Application of solar reflective bituminous aluminium paint @ 100 g/sqm

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note:- (i)The cost of 4mm thick Glass pane and stainless steel wire netting shall be included in the quoted rate. (ii) For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L in repair for 5mm thick Solid PVC Wall Lining consisting of 5mm thick prelaminated colour PVC sheet inclusive of solvent cement and fixing including cover fillet at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed.

S&F Ball bearing runners 45 mm, 500 mm long Telescopic ball bearing drawer channel full extension load capacity 50 kg complete all as specified and directed.

S&F in repairs stainless steel auto closer counter sunk hinges complete all as specified and directed.

S&F in repairs 100mm long stainless steel handle complete all as specified and directed.

S&F in repair UV protection sun control film for window and door glass complete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 40mm thick PCC type B 0 1:2:4 (using 12.5mm graded aggregate ) as in repair top surface of pavement and flooring etc. and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 100 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete type C2 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and directed.

M&L for 75mm thick cement concrete type D2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

Dismantling / removal of old interlocking paver blocks complete all as directed by Engr- in- charge.

M&L Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling and well ramming complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, with grey cement and pigment complete all as specified and directed.

All as per Item No 125 but expect paver block complete all as specified and directed. Note : Paver block obtained from item No 123 shall be reused.

S&F in repair sinks made of stainless steel 1 mm thick kitchen sink with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and directed.

Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for damp proofing course, etc., and making good, cutting exc 20 cm girth complete all as specified and directed.

S&F in repairs, 15mm size Chromium Plated fancy type Bib Taps, quarter turn with flange and aerator, short body, cast copper alloy with crutch or butterfly handle, screwed for GI/ CPVC pipe, complete all as specified and as directed

S&F Angle Stop valve, cast copper alloy chromium plated fancy type screwed down for 15 mm bore pipe complete all as specified and as directed.

S&F Angle Stop valve, cast copper alloy chromium plated screwed down for 20 mm bore pipe complete all as specified and as directed

S&F in repairs PTMT gratings with provision to receive the waste water pipe and fixed with white cement alround, 100 mm dia with minimum weight 25 gms complete all as specified and as directed.

Taking out or down steel tubing and connections 15mm complete all as specified and as directed.

Taking out or down steel tubing and connections 20mm complete all as specified and as directed.

Taking out or down steel tubing and connections 25/32mm complete all as specified and as directed

S&F in repairs, on wall/ concealed on wall, 16mm dia. High pressure CPVC pipes SDR-13.5 & Plain CPVC SDR 11 fittings including all necessary fittings, solvents, complete all as specified and directed.

Supply and fix in repairs, on wall/ concealed on wall, 20mm dia. High pressure CPVC pipes SDR-13.5 & Plain CPVC SDR 11 fittings including all necessary fittings, solvents, complete all as specified and directed.

Supply and fix in repairs, on wall/ concealed on wall, 25mm dia. High pressure CPVC pipes SDR-13.5 & Plain CPVC SDR 11 fittings including all necessary fittings, solvents, complete all as specified and directed.

S&F Kitchen utensil stand stainless steel of size 75 x 75 cm with minimum 25cm width complete all as specified and directed

Supply and fix in repairs, bib tap/ stop cock /angle valve any bore dia any type of 15mm dia including repairing and replacing spindle/washer etc and refixing complete all as specified and directed.

All as per Item No 140 above but pillar tap 15mm dia complete all as specified and directed.

S&F in repairs, PVC bathroom cabinet (white) of size 420 x 300 x 100mm (approx.), with one single shutter and built in mirror in front of shutter complete all as specified and directed.

M&L for scrubbing, cleaning thoroughly, removing all scale and dirt, mud sediments, silts etc. from the internal surfaces of HDPE Storage Tanks below 750 Litres (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required, including writing the words "DATE OF CLEANING" in capital letters of suitable size on outside visible place of Water Tank with synthetic enamel paint (white) over black background, complete all as specified and as directed.

All as per Item No 143 above but 500 Ltr capacity tank complete all as specified and as directed.

All as per Item No 143 above but 300 Ltr capacity tank complete all as specified and as directed.

All as per Item No 143 above but 250/270 Ltr capacity tank complete all as specified and as directed.

M&L for scrubbing, cleaning etc thoroughly, RCC OH service tank 20,000 Ltr capacity situated in different locations at satellite area including removal of sludge, bleaching sediments, mud or any other deposits to a distance not exc 50 metres white washing of inner portion of tank, including writing the words "TANK CAPACITY AND DATE OF CLEANING" in capital letter of suitable height matching with the existing marking at outer wall with synthetic enamel black/white paint , complete all as specified and as directed.

All as per Item No 147 above 15,000 Ltr capacity complete all as specified and as directed.

All as per Item No 147 above 10,000 Ltrs capacity complete all as specified and as directed.

M&L for scrubbing, cleaning etc thoroughly, RCC UG / AG sumps of following 2,72,000 Ltr capacity situated in different locations at satellite area including removal of sludge, bleaching sediments, mud or any other deposits to a distance not exc 50 mtrs, white washing of inner portion of tank including writing the words "TANK CAPACITY AND DATE OF CLEANING" in capital letter of suitable height matching with the existing marking at outer wall with synthetic enamel black/white paint in different locations at satellite area, complete all as specified and as directed.

All as per Item No 150 above 200,000 Ltrs capacity complete all as specified and as directed.

All as per Item No 150 above 100,000 Ltrs capacity complete all as specified and as directed.

All as per Item No 150 above 68,000 Ltr capacity complete all as specified and as directed.

M&L for scrubbing, cleaning etc thoroughly, OPEN WELL any capacity situated in different locations at satellite area, including removal of sludge, bleaching sediments, mud or any other deposits to a distance not exc 50 metres including writing the words " DATE OF CLEANING" in capital letter of suitable height matching with the existing marking at outer wall with synthetic enamel black/white paint ,complete all as specified and as directed.

M&L for preparing the exposed outer surface of UG / AG sumps situated in different locations at satellite area ,by cleaning with wire brush, brooming etc & applying one coat of exterior weather coat antifungal paint, complete all as specified and as directed.

POOJA ENGINEERING WORKS

ANIE JOHN CONTRACTORS

Albert Rebello and Company

REIGN CONSTRUCTIONS