Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-AOC | ₹1.5 L Quoted ₹1.7 L | L1 | Accepted-AOC being L1 |
| 2 | l2₹1.8 L+₹9,950 (6.01%)Rejected-Finance OPPOSITE VIPUL GAS AGENCY HOSPITAL ROAD SOLAN H P | SOLAN | SOLAN | HIMACHAL PRADESH | ₹1.8 L+₹9,950 (6.01%) | l2 | Rejected-Finance being L2 |
| 3 | L3₹1.8 L+₹17,900 (10.8%)Rejected-Finance | ₹1.8 L+₹17,900 (10.8%) | L3 | Rejected-Finance being L3 |
| Sl No | Description | Qty | Unit | Metro Suppliers and Construction Company L3 | M/S THAKUR ELECTRICAL & HARDWARE STORE L1 | ROYAL ENGINEERING WORKS L2 |
|---|---|---|---|---|---|---|
| 1.00 | Providing and installation of submersible pump set of KSB/ Crompton/ Kirlosker make confirming to latest BIS code, The pump shall be fitted with bronze impeller of suitable alloy for handling Clear water as per IS : 8034-1976 having oil/grease packed bearing and stainless steel shaft wound stator on motor side with shaft protection sleeves on pump side ensuring better life for shaft. The impeller of pump shall be directly mounted on extended submersible shaft confirming to BIS 9238-1979 with up to date amendments of 2900 (N) RPM totally dust and water proof with detachable pump casing for easy inspection with double mechanical seal, grease/oil lubricated bearing and suitable for operation on 415 +/- 10% volts 3 phase 50 C/S AC supply. The power of motor should be at least 10% in excess of maximum power required by the pump in complete operating range with mounting stand/duck foot bend, steel guide wire with mounting hook, lowering chain and standard accessories by manufacturing complete and suitable for fulfilled the following requirements complete in all respect including entire carriage of material up to all leads and lifts as per direction and to the entire satisfaction of the Engineer in charge. Discharge :- 1.3 LPS Head :- 130 Mtrs | 1 | Set | 61,500 ₹61,500 | 54,000 ₹54,000 Lowest | 58,000 ₹58,000 |
| 2.00 | Providing and errection of MS fabricated control panel board suitable for 3 HP submersible motor of L&T/BCH/Crompton make consisting of ammeter, voltmeter, indicating lamp. MCCB, direct on line starter, On/Off push button complete with internal wiring . | 1 | No | 14,500 ₹14,500 | 13,000 ₹13,000 Lowest | 14,000 ₹14,000 |
| 3.00 | Providing and Fixing of 3 core copper cable 4mm2 Havells / L&T/ Finolex/CRI make entire carriage of material upto all leads and lifts as per the direction of the Engineer in Charge. | 160 | Rmt | 350 ₹56,000 | 330 ₹52,800 Lowest | 340 ₹54,400 |
| 4.00 | Providing and erection of G.I. rope wire 6mm and to the entire satisfaction of the Engineer-in-Charge. | 140 | Rmt | 75 ₹10,500 | 60 ₹8,400 Lowest | 70 ₹9,800 |
| 5.00 | Providing and fixing PVC pipe of 32 mm dia including entire carriage of material upto all leads and lifts as per the direction of the Engineer in Charge. | 65 | Rmt | 370 ₹24,050 | 350 ₹22,750 Lowest | 360 ₹23,400 |
| 6.00 | Providing and fixing of horizontal nipple of 32mm dia complete upto all leads and lifts as per the direction of the Engineer in Charge. | 1 | Each | 1,700 ₹1,700 | 1,500 ₹1,500 Lowest | 1,600 ₹1,600 |
| 7.00 | Providing and fixing of Clamp for submersible set complete upto all leads and lifts as per the direction of the Engineer in Charge. | 1 | Each | 1,300 ₹1,300 | 1,000 ₹1,000 Lowest | 1,200 ₹1,200 |
| 8.00 | Lowering of submersible set with riser pipe cylinder connecting rods etc. complete in the hand pump and to the entire satisfaction of the Engineer-in-charge. | 1 | Job | 13,800 ₹13,800 | 12,000 ₹12,000 Lowest | 13,000 ₹13,000 |
Tender Value
Refer Docs
EMD Value
₹3,000
Closing Date
4 Jul 2026, 11:00 amClosed
EE JSV Division Jhandutta
EE JSV Division Jhandutta
AR MO LWSS Talai Town in Tehsil Jhandutta Distt Bilaspur HP SH Providing and installation of submersible pump with all allied accessories for at Bore No. 5 LWSS Talai
2026_HPIPH_137557_1
JSDJ-2845-2944 dt. 25.6.2026
Open Tender
Electrical Works
Item Rate
90 days
Jhandutta
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
₹3,000
23 Aug 2026
25 Jun 2026
4 Jul 2026
25 Jun 2026
4 Jul 2026
25 Jun 2026
25 Jun 2026 - 4 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and installation of submersible pump set of KSB/ Crompton/ Kirlosker make confirming to latest BIS code, The pump shall be fitted with bronze impeller of suitable alloy for handling Clear water as per IS : 8034-1976 having oil/grease packed bearing and stainless steel shaft wound stator on motor side with shaft protection sleeves on pump side ensuring better life for shaft. The impeller of pump shall be directly mounted on extended submersible shaft confirming to BIS 9238-1979 with up to date amendments of 2900 (N) RPM totally dust and water proof with detachable pump casing for easy inspection with double mechanical seal, grease/oil lubricated bearing and suitable for operation on 415 +/- 10% volts 3 phase 50 C/S AC supply. The power of motor should be at least 10% in excess of maximum power required by the pump in complete operating range with mounting stand/duck foot bend, steel guide wire with mounting hook, lowering chain and standard accessories by manufacturing complete and suitable for fulfilled the following requirements complete in all respect including entire carriage of material up to all leads and lifts as per direction and to the entire satisfaction of the Engineer in charge. Discharge :- 1.3 LPS Head :- 130 Mtrs | 1 | Set | - | - |
| 2 | Providing and errection of MS fabricated control panel board suitable for 3 HP submersible motor of L&T/BCH/Crompton make consisting of ammeter, voltmeter, indicating lamp. MCCB, direct on line starter, On/Off push button complete with internal wiring . | 1 | No | - | - |
| 3 | Providing and Fixing of 3 core copper cable 4mm2 Havells / L&T/ Finolex/CRI make entire carriage of material upto all leads and lifts as per the direction of the Engineer in Charge. | 160 | Rmt | - | - |
| 4 | Providing and erection of G.I. rope wire 6mm and to the entire satisfaction of the Engineer-in-Charge. | 140 | Rmt | - | - |
| 5 | Providing and fixing PVC pipe of 32 mm dia including entire carriage of material upto all leads and lifts as per the direction of the Engineer in Charge. | 65 | Rmt | - | - |
| 6 | Providing and fixing of horizontal nipple of 32mm dia complete upto all leads and lifts as per the direction of the Engineer in Charge. | 1 | Each | - | - |
| 7 | Providing and fixing of Clamp for submersible set complete upto all leads and lifts as per the direction of the Engineer in Charge. | 1 | Each | - | - |
| 8 | Lowering of submersible set with riser pipe cylinder connecting rods etc. complete in the hand pump and to the entire satisfaction of the Engineer-in-charge. | 1 | Job | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
form6.pdf
Tender Documents • 0.70 MB
form8.pdf
Tender Documents • 1.18 MB
conditions.pdf
Tender Documents • 0.10 MB
BOQ_203611.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .