REPAIR MAINT TO ROAD FURNITURE ROAD PATH CULVERT PETTY REPAIR TO BUILDINGS REPAIR TO DRAIN AT RAMBILLI

Amount

Supply & fix in repair for Poly carbonate Convex Mirror outdoor type 800mm dia made out of fibre alongwith bracket, Pole mounted and fixed to 80mm bore Medium Grade GI Pipe of required length complete and embedded in PCC 1:3:6, type C1 including necessary earth work required for poles complete all as specified. Make : Intex/Syntex or equivalent.

S&F Retro Reflective Sign Boards (one Written) Made up to 2mm thick aluminium sheet, face to be fully covered with high Intensity Prismatic (Type-IV) sheeting conforking to type-III of ASTDM-D 4956-01 as approved by GE with letters (Block, Roman, Italic or Indian) including necessary stops, commas, short lines, dashes, brackets, etc (Number of alphabets not exceeding 30 Nos per each side), Index hands (Natural Size) or arrows (upto 600mm long) , number, borders etc as per IRC 67-2001 in silver/white with blue/green or any other colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to Class II ASTDM-1956-01 and fixing same to the structural frame work by means of suitable size aluminium, alloy, rivets or bolts and nuts including the cost of painting with two coats of epoxy paint in grey colour on the back side of aluminium sheet and erecting in position complete all as specified and as directed. Make : Intex or equivalent. Note: Rate quoted is deemed to be including PCC 1:2:4, type B1 block of size 450x450x600mm for fixing MS Post, 2 Nos of MS Posts made out of 50mm bore Medium Grade MS Pipe of 3.00m long, Structural frame work with 25 mm square pipe with 1.6 mm thick wall, applying two coat of synthetic enamel paint over a coat of Zink Chrome Primer to MS frame work and earth work etc.

S&F Single Post Mandatory Road Sign Board of normal size as per IRC 67- 2001 consisting of MS Tube, 40mm bore, Medium grade confirming to Fe-290 (Grade E-165) of 3.0 Metre Height out of which 1.00 metre is embeded in PCC below ground level, Aluminium Sheet 2mm thick, 600mm dia or 600 mm Isosceles Triangle fitted at top and bottom is fitted with MS plate 200x200x6mm thick, embedded in PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) of size 450x450x1000mm, including necessary earthwork in any type of soil and removal of soil upto 50 metre, applying two coats of synthetic enamel paint over one coat of zinc chorme primer on all exposed steel surfaces. The front side of baord shall be stuck with a layer of red signal colour sticker sheet conforming to IRC 67-2001 and over that the traffic sign sticker conforming to IRC67-2001 like speed limit, school zone, One way, No Entry etc shall be stuck complete all as specified and as directed. Note:- Rate Quoted shall be deemed to include earth work, MS Post, sheet, sticker, Painting concrete etc all as directed.

S&F for Reflective metal delineators, reflective tape fix on top and Jali on reflective tape so that no one can remove them from pole embedded in PCC 1:2:4, type B1 (using 20mm graded stone aggregate) of size 450x450x600mm, including necessary earthwork in any type of soil and removal of soil upto 50 metre complete all as specified and directed by Engineer-in-Charge.

S&F Rubber speed breaker ISI marked Size 500mmx400mmx50mm and end caps Size 175x400x50mm yellow and black colour complete all as specified and directred.Make : Intex or equivalent.

S&F flexible safety cones 750mm high double reflective marking orange colour complete all as specified and directed.

S&F flexible PVC traffice Barricades yellow and black colour or as directed by GE of size 2000mmx1200mmx550mm with reflective marking complete all as specified and directed.

S&F flexible PVC Spring Post 750mm tall double reflective marking orange colour complete all as specified and directed.

M&L for Repair to pothholes with paving bitumen any depth, not exc 1.00 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm putting in pre-mixed bituminious macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pothholes exc 30mm complete all as specified and directed.

M&L Hardcore of broken stone or boulders of guage exc 63mm but n.exc 100mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for finishing surface of concrete roads, pavements, by brooming complete all as specified and directed.

M&L for forming 12mm thick Expansion joints 100mm thick concrete filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade A complete all as specified and directed.

M&L for forming Contraction (Dummy) joints 65mm deep x10mm wide filled with sealing compund Grade "A" complete all as specified and directed.

M&L for cleaning and preparation of the substrate to which the waterproofing barrier applied must be carried out thoroughly to leave a sound base for the application. Any laitance present on the surface must be removed mechanically. Release oil and other contaminants which may impair adhesion must be removed prior to the application. Surface shall be maintained in dry condition before applying waterpfoof coating. This rate includes water pond test (Pre & Post WP treatment). Note:- Includes Bore packing, Injection grounting(using cebex 100), covering and crack repairs. Providing and applying Fosroc Nitoproof 600 PF of Fosroc chemicals or approved equivalent a single component pitch free polyurethane based coating that cures by reaction with atmospheric moisture to form a tough but flexible waterproofing membrane. It is elastomeric, seamless waterproof membrane applied in 2 coats to DFT not less than 1.5mm thick having a elongation capacity of over 400%. Termination to be done on wall extending the coating to min 300 mm height above the finished floor level and sealed inside the groove of 20mm widex10mmthick flushed with polymer modified mortar as per vendor recommendation. Laying 200gsm non-woven geo textile membrane over Nitoproof 600 PF coating with overlap sealed using synthetic rubber adhesive before providing screed concrete. The material shall comply to – ASTM C 836, Elongation (ASTMD412):>400%, specific gravity : 1.4g/cc, solid content: 85%, Laying 200gsm non-woven geo textile membrane over Nitoproof 600 PF coating with overlap sealed using synthetic rubber adhesive before providing screed concrete. The material shall comply to – ASTM C 836, Elongation (ASTMD412):>400%, specific gravity : 1.4g/cc, solid content: 85%, Modulus@100% elongation (ASTM D412) : 0.62 N/mm2, Tear resistance (ASTM D 624) : 15N, water vapour transmission (ASTM E96) : 0.6 g/m2/hr, Water permeability @ 5 bar : Nil, Shore A hardness (ASTM D2240) : 60 complete all as specified and directed by Engineer-in-Charge.

Supply and application of two component pigmented aliphatic polyurethane based UV protection topcoat Dekguard PU of Fosroc or equivalent applied in an average minimum DFT of 60 to 80 micron complete all as specified and directed.

M&L for Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size 25 to 30mm thick exceeding 0.25Sqm area but not 0.5 Sqm fixed with and including one number SS clamps (grade 202) of flat 30mmx2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed.

M&L rendering 10 mm thick CM 1:4 on fair faces of wall of brick work or concrete surfaces fcomplete all as specified and directed.

M&L screed bed or bedding layer in CM 1:6 of mortar 15mm thick for laying floor finished complete all as specified and directed.

M&L for Acrylic PVC letters on walls alphabets not exceeding 400mmx40mmx10mm in any colour as directed by GE/Engr in charge in Hindi, English and Telgu complete all as specified and directed.

M&L for granite tiles 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing type match with exiting surface complete all as specified and directed.

M&L 20mm granite tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone includiung grinding and polishing complete all as specified and directed.

Supply and fix in repairs bib tap cromium plated fancy type 15mm bore dia cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specfied and directed.

Supply and fix in repair of Rotational moulded Polythylene water storage tank triple layer of 1000 Litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Supply and fix in repair 10 Litres low level PVC flush Cistern as fixed in repairs and including of 32mm dia PVC flush pipe to connect from flush cistern to water closet (any pattern) and making good all the joints all as specified.

Supply and fix in repair CP toilet roll paper holder with flap all as directed and speicified.

Supply and fix in repair health faucet including one mtr length SS connecting pipe all as specified and directed.

Supply and fix in repair 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and directed.

Supply and fix in repair aluminium alloy anodised sliding door bolt 300mm long with hasp staple (bolt 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and directed.

S&F in repairing 20mm outer dia 3-layer PP-R Polypropylene random copolymer pipes SDR 7.4 11UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed to walls, ceilings or in floors etc complete all as specified and as directed.

S&F in repairing 25mm outer dia 3-layer PP-R Polypropylene random copolymer pipes SDR 7.4 11UV stabilized and antimicrobial fusion welded haveing thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed to walls, ceilings or in floors etc complete all as specified and as directed.

S&F in repairs Bib taps standard of PTMT any colour high pressure screwed fancy type long body min weight for 15mm 120 gms complete all as specified.

S&F 4mm dia galvanised steel wire, 150x10mm mesh made up into mattersses or cages lapped wired and laid in position including closing after filling complete all as specified and directed.

Excavating in post holes in soft/loose soil each n.exc 0.5 Cum getting out returning filling and ramming earth or broken rubble mixed with earth around in layers not exceeding 05cm, watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.

M&L for steel round bars 10mm dia and over cut to length bent to shape reuired, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde.E-250) quality A of Fe290 (Gde-E-165) complete all as specified and directed.

M&L for Rolled mild steel in Joist, channel, angle or tee sections fixed independently without connecting plates, etc confirming Fe 290 (Gde E-165) complete all as specified and directed.

S&F in repairs Decorative window aluminium corded venetain blinds as approved quality including all accessories and size of Blind as per site requirement complete all as specified and directed.

S&F in repairs fabric roller blinds in a single pieces as approved quality including all accessories and size of blind as per site requirement complete all as specified and directed.

Cleaning of septic tank and soakage well by pumping out /bailing out sludge complete all as directed at site and making it free from any residual waste (solid/liquid whatsoever) and disposing off sludge and waste water etc by depositing the same in near by pits to a distance n.exc 100 mtrs from the manholes, but away from wells/water storage tanks, complete all as specified and directed by engineer-in-charge.

M&L for RCC 1:2:4 type B1, 20 mm graded crushed stone aggregate in walls, retaining walls any thickness complete all as specified and directed by Engineer-in-Charge.

M&L for steel formwork to sides, faces of vertical walls, retaining walls and similar works etc vertical or to batter and like for fair finished surfaces of concrete complete all as specified and directed by Engineer-in-Charge.

M&L for reinforcemnt in any situation using CRS TMT steel bars of grade Fe-500D, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns and biding with andincluding mild steel wire (annealed) not less than 0.9mm dia for securing with clips complete all as specified and directed by the engineer-in-charge.

M&L for PCC 1:4:8 type D2 40 mm graded crushed stone aggregate in foundation, filling and mass concrete complete all as specified and directed by engineer-in-charge.

M&L PCC 1:2:4 type B1(20 mm graded crushed aggregate) 100mm thick complete all as specified and directed.

M&L PCC 1:2:4 type B0 (12.5mm graded stone aggregate) for kerb stones complete all as specififed and directed.

M&L for PVC (SWR) pipes 160mm single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforcement) in ground floors and pavings exc. 15cm thickness but above the ground floor complete all as specified and directed.

M&L for brickwork with old size fly ash bricks, straight or curved on plan exc 6.00m mean radius, built in CM 1:6 complete all as specified and directed.

PRADEEP ENTERPRISES