REPAIR/ MAINT OF STREET LIGHT AND INTERNAL ELECTRIFICATION IN MD/ OTM ACCN AT AREA B AF STN WADSAR

Amount

Taking down carefully point wiring of any type, size and description (light, fan, socket outlet etc.) including removal of battens, pipes, sockets, switches, ceiling roses, light fittings etc, complete and making good the disturbed surfaces to match with existing, complete all as specified and as directed.

Taking down main switches, bus bar, distribution boards etc of any type and capacity along with the existing boards, and removing the same from site and making good the disturbed surfaces/ portion of walls etc. complete all as specified and as directed.

Taking down old and unserviceable sub main wiring of any size and description and removable the same from site and making good the disturbed surfaces/ portion of walls etc. complete all as specified and as directed.

M&L for concealed sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and in existing conduit pipe including one run of 4.0 Sqmm single core PVC insulated, FRLS, flexible copper cable as earth continuity conductor in green colour complete all as specified and as directed. Note:- (a) Two runs of single core cable with one run of earth continuity cable will be measured and paid as one unit. (b) Make disturbed surface good to wall/ floors.

M&L for concealed sub main wiring of two run with 06 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and in existing conduit pipe including one run of 6.0 Sqmm single core PVC insulated, FRLS, flexible copper cable as earth continuity conductor in green color complete all as specified and as directed. Note:- (a) Two runs of single core cable with one run of earth continuity cable will be measured and paid as one unit. (b) Make disturbed surface good to wall/ floors.

M&L for sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC casing-n-coping of size 25 x 16 mm medium grade and accessories of suitable size and fixed on wall/ ceiling including one run of 4.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green color complete all as specified and as directed. Note:- (a) Two runs of single core cable with one run of earth continuity cable will be measured and paid as one unit. (b) Make disturbed surface good to wall/ floors.

M&L for concealed point wiring complete with FRLS PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm, 1100 volt grade, alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly in and including PVC conduit pipe fitting medium grade of 25 mm dia fixed in concealed surface of wall/ceilling/ false ceilling including cutting/ chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall only with 3.0mm thick laminated sheet where as required and accessories complete suitable for the following:-

One light/ fan point controlled by one on way switch.

One socket outlet 05 Amps on the same board.

One socket outlet 05 Amps on independent board.

One bell/ buzzer point controlled by on bell push.

One light point controlled by two 2- way switches with cables 1.5 sqmm size.

All as per Item No. 07 above but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable 1100 volt grade, (FRLS) through and including 20x12 mm PVC casingn-copping and its accessories, cadmium screws and including 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable (FRLS) as earth continuity conductor and MS boxes made of 16 gauge MS sheet concealed type on walls cover 3mm thick for housing complete all as specified and as directed for the following:-

One light/ fan point controlled by one on way switch.

One socket outlet 05 Amps on the same board.

One socket outlet 05 Amps on independent board.

One bell/buzzer point controlled by on bell push.

All as per Item No. 09 above but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket complete all as specified and as directed.

M&L for flame proof point wiring complete using colour code with two run of 1.5 Sqmm single core multi-stranded copper conductor ZHLS PVC insulated and unsheathed multistrandard copper conductor cable 1100 V grade conforming to IS-694 drawn through and including ERW steel conduit 20 mm dia (external flame froof) heavy grade (IS Marked) including necessary all accessories/ fixtures, concealed in wall, ceiling including sunken type pressed steel terminal boxes with flame retardant sheet of approved shade 3 mm thick including providing continuous earth wire with one single run of 1.5 sq mm single core mult-stranded copper conductor ZHLS, PVC insulated and unsheathed cable 1100 volts grade conforming to IS 694 for one light point controlled by one way flame proof switch etc, complete all as specified and as directed by Engineer-In-Charge. Note:- The cost of cutting chases in wall/ floor/ ceiling wherever required and making good the surface as existing shall be deemed to be included in respective items of schedule.

S&F in replacement of LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vaporgroup of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

S&F in replacement of flame proof and weather proof single pole rotary/ cam switch on-off with direct entry single pole 16A on-off in AL LM-6, 230V complete all as specified and as directed.

S&F 2 way sheet metal enclosures for flush/ surface mounting distribution board single door, 240 volts without bus bar complete all as specified and as directed.

S&F in replacement 4 way sheet metal enclosures for flush/ surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and as directed.

All as per Item No. 15 above but 8 way.

All as per Item No. 15 above but 12 way

All as per Item No. 15 above but 4 way 415 volts TPN DB.

M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to 25x4 mm galvanised earth strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed.

S&F in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

All as per Item No. 20 above but SP 40 AMP capacity.

S&F following amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

SP 5 To 32 AMP.

SPN 32 AMP.

SPN 40 to 63 AMP.

S&F TPN/ FP 40 to 100 AMP, 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed.

All as per Item No. 23.00 but TPN 40 to 100 AMP capacity of 'C' Curve

S&F 40 Amps RCBO A-type (TPN-4M) 240/ 415 Volt, 50 Hz , 10 KA short circuit capacity and breaking capacity 100 mA complete all as specified and as directed.

Repair/ maint of day to day complaints (light/ bell/ ceiling fan/ exhaust fan/ switch and socket any type/ geysers point etc.) by using following spare parts to rectify the defects and make serviceable with or without replacing spare parts complete all as per the directed by Engr-in-charge. Note:- (i) Contractor shall provide appropriate technician and labour on daily basis. (ii) Fixing charges against each item are included with item.

S&F switch piano, single pole one way 5 Amps, 240 volt capacity flush type complete all as specified and as directed.

S&F switch flush type, 05 Amp single pole, two way complete all as specified and as directed.

S&F 3 pin 5 Amps Socket outlet 3 pin, 5A, flush type complete all as specified and as directed.

S&F bell push piano type, single pole one way 5 Amps 240 volts capacity flush type complete all as specified and as directed.

S&F an electric bell ding dong AC 230 volt single pole all as specified.

S&F 5 pin, 5 Amps switch & socket combination flush type multipurpose 3 pin, 5 Amp flush type universal complete all as specified and as directed.

S&F 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified and as directed.

S&F ceiling rose, 5 Amps surface type 240 volts bakelite three terminal as ordered complete all as specified and as directed.

S&F fan regulator electronic step type 230 volts suitable for any type of ceiling fan sweep complete all as specified and as directed.

S&F switch type fan regulator electronic switch type 230 volts suitable for any type of ceiling fan of any sweep complete all as specified and as directed.

S&F in replacement modular switch, one way, 6 Amps, 1 module, ISI marked complete all as specified and as directed.

S&F in replacement modular socket, 6 Amps - 2/ 3 pin combined 2 module, ISI marked complete all as specified and as directed.

S&F in replacement modular socket, 6/ 16 Amps - 2/ 3 pin combined 2 module, ISI marked complete all as specified and as directed.

S&F in replacement modular switch, one way, 16/ 20 Amps, 1 module, ISI marked complete all as specified and as directed.

S&F in replacement modular switch, two way, 6 Amps, 1 module, ISI marked complete all as specified and as directed.

S&F in replacement modular bell push, 6 Amps, 1 module, ISI marked complete all as specified and as directed.

S&F in replacement modular fan step regulator, 120 W - 1 module, ISI marked complete all as specified and as directed.

S&F in replacement modular white cover plate with frame, 1 module, ISI marked complete all as specified and as directed.

S&F in replacement modular white cover plate with frame, 2 module, ISI marked complete all as specified and as directed.

S&F in replacement modular white cover plate with frame, 3 module, ISI marked complete all as specified and as directed.

S&F in replacement modular white cover plate with frame, 4 module, ISI marked complete all as specified and as directed.

S&F in replacement modular white cover plate with frame, 6 module, ISI marked complete all as specified and as directed.

S&F in replacement modular white cover plate with frame, 8 module, ISI marked complete all as specified and as directed.

S&F in replacement modular white cover plate with frame, 12 module, ISI marked complete all as specified and as directed.

S&F on wall , plug and socket in sheet steel enclosure with Songle pole & earth, suitable for 20 Amp with providing MCB SP 20 Amp suitable for single phase AC supply complete all as specified and as directed.

S&F holder brackets/ angle suitable for any type of lamp (as per sample ordered) complete all as specified and as directed.

S&F 12 watt ball type LED lamp complete all as specified and as directed.

S&F in replacement of 10 watt ball type LED lamp, 230 volt suitable for recess mounting light fittings complete all as specified and as directed.

S&F flexible PVC pipe of 25mm bore for passing the cable complete all as specified and as directed.

S&F in replacement 3 pin 05 Amps switch socket combination, box type multipurpose 2 in 1 type (3 pin 5 Amps) complete all as specified and as directed.

S&F in replacement 3 pin 15 Amps switch socket combination, box type multipurpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified and as directed.

S&F in replacement of LED batten fitting alongwith removable LED Tube 20W, 230 Volt, 6000K, wall/ ceiling mounted, LED batten fixed by means of bolts, ABS rotor suitable for single side connections. LED rod having glass material complete haivng lumen efficacy minimum 100 lm/w, CCT 6500 K, powered by integral constant current driver suitable for 240 V AC with all accessories internallly prewired including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete all as specified and as directed.

S&F in replacement LED luminaire 600mm x 600 m, 35/ 36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

All as per Item No. 30 above but 12 watt.

All as per Item No. 30 above but 15 watt.

S&F LED light fitting 1x9W/ 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in replacement Polycarbonate retrofit LED tube rod of 18W rod for replacement with existing T8 & T12 FTL having high quality polycarbonate end cap are snap fitted in housing complete having lumen efficacy 100 lm/w, powered by integral constant current driver suitable for 240 V, AC with all accessories internallly prewired including connecting up with exising FTL & making single ended connection by twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Taking down ceiling fan/ exhaust fan/ wall mounted fan/ pedastal fan/ cabin fan any sweep from sealing cable end, dismantling blades and removing fan and blades to store and reassembling and refixing the fan after repairing/ servicing complete all as specified and as directed. Note:- Replacement of any parts like capacitor, condensor, ball bearing, painting, bushing, winding, blades, canopy and alike will be measured and paid seperately and rate also includes for cleaning, greasing, providing machine made screw, split pin etc alike complete.

M&L for strip opening and cutting of old burnt copper winding of ceiling/ exhaust/ wall mounted/ pedestal/ cabin fan any type and sweep complete all as specified and as directed.

Rewinding of ceiling fan motors 1200mm/ 1400mm with new super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton tape sleeves, varnish, reassembling, testing and commencing for satisfactory run, complete all as specified and directed by Engineer-in-Charge.

All as per Item No. 37.00 above, but rewinding of 300mm exhaust fan.

All as per Item No. 37.00 above, but rewinding of 400/ 450mm exhaust fan.

All as per Item No. 37.00 above, but rewinding of wall mounted/ pedestal/ cabin of 400/ 450mm sweep.

M&L in replacement of fan capacitor/ condensor 2.5 MFD, 240 volt of ceiling fan/ exhaust fan/ wall mounted fan complete all as specified and as directed.

M&L in replacement of fan capacitor/ condensor 4.0 MFD, 240 volt of exhaust fan complete all as specified and as directed.

S&F down rod 12 mm dia made out of high density mild steel 900mm long as per approved sample complete all as specified and as directed.

S&F down rod 12 mm dia made out of high density mild steel 600mm long as per approved sample complete all as specified and as directed.

M&L in replacement of ball bearing of original size suitable for ceiling fan 1200/1400mm sweep complete all as specified and as directed.

M&L in replacement of ball bearing of original size suitable for exhaust fan 300mm sweep complete all as specified and as directed.

M&L in replacement of ball bearing of original size suitable for exhaust fan 400/ 450mm sweep complete all as specified and as directed.

M&L in replacement of gun metal bushes suitable for ceiling fan 1200mm sweep complete all as specified and as directed.

S&F in replacement flexible cord of 230 volt grade, size 0.50 sqmm two core, multi stranded copper conductor complete all as specified and as directed.

M&L in replacement of nut and bolt (not less than 2.5 inches) and 0.25 inches dia with suitable size rubber reel for hanging of ceiling fan complete all as specified and as directed.

M&L in replacement of PVC canopy of any size and shape suitable for existing ceiling fan complete all as specified and as directed.

M&L for painting to ceiling fans complete, in-situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and as directed.

All as per Item No. 52.00 above, but for exhaust fan 300mm sweep inlcuding blades complete all as specified and as directed.

All as per Item No. 52.00 above, but for exhaust fan 400/ 450mm sweep including blades complete all as specified and as directed.

M&L in replacement of blades of 1200mm sweep made of aluminium sutiable for ceiling fans complete all as specified and as directed.

S&F in replacement blades of 300/ 400/ 450 mm sweep made of aluminium suitable for exhaust fans complete all as specified and as directed.

S&F in replacement of PVC blades for wall mounted fan 400mm sweep complete all as specified and as directed.

M&L in replacement of louvers suitable for 300mm sweep exhaust fan complete all as specified and as directed.

All as per Item No. 58.00 above, but for 400/ 450mm sweep exhaust fan.

Supply only ceiling fans complete with three blade, down rod, accessories 230V, 1200mm sweep, with squirrel cage induction motor complete all as specified and as directed.

Disconnecting carefully water and electric connection from geysers and taking down of storage type water heater of 50 ltr capacity of any make and 230 volt, for repair by removing the heating assembly, thermostat, element, cleaning and decaling of inner tank, heating plate assembly by suitable decaling solution properly, welding, soldering/ brazing to arrest leakage and re-assembling the complete geysers and refixing in existing position with fixing arrangement including fixing of heating elements/ thermostat complate all as specified and as directed.

All as per Item No 61.00 above, but for 25 ltr geysers complete all as specified and as directed.

Note for Ser item Nos. 61.00 & 62.00:- Replacement of any parts like heating elements, glass wool thermostat, switches, indicating lamp, painting and alike will be measured and paid seperately and rate also includes for cleaning complete.

M&L for grouting in walls, making hole, fixing of suitable type of bolts, nuts and washers including installation of water heater of any capacity in suitable places, complete all as specified and as directed.

M&L for replacement of glass wool of approved quality complete all as specified and as directed by Engineer-in-Charge.

M&L in replacement of geyser inner tank assembly for any type and capacity of water heater complete all as specified and as directed.

S&F in replacement of steel inner tank for 35/50 ltrs tank capacity of water heater as per existing model complete all as specified and as directed.

S&F in replacement of inner tank for 15/25 ltrs tank capacity of water heater complete all as specified and as directed.

M&L in replacement of heating element embedded type of nickel plated copper sheathed tubular mineral filled of 1.5 KW capacity complete with rubber of ISI marked for geysers complete all as specified and as directed.

All as per Item No. 68.00 above, but of 2.0 KW capacity complete all as specified and as directed.

M&L in replacement of thermostat switch with temperature adjustment range 40 to 85 degree celsius ISI marked complete all as specified and as directed.

M&L in replacement of indicator neon type suitable for any type capacity of water heater as existing complete all as specified and as directed.

S&F in replacement PVC connections of 15mm dia suitable for hot & cold water 450 mm long with brass nuts and rubber washers complete all as specified and as directed.

M&L for preparation of old painted surfaces of water heater of capacity 50 ltrs including scrapping and cleaning and applying two coats of DICO super enamelled paint of white colour complete all as specified and as directed.

All as per Item No. 73.00 above, but on 25 ltrs capacity water heater complete all as specified and as directed.

M&L in replacement safety pressure valve of size 15 mm dia, ISI marked for geysers, complete all as specified and as directed by Engineer-in-Charge.

M&L for servicing of 1000 LPD solar water system (evaculated tube collector type) and maintenance of complete solar water heating system for carrying out minor leakage, cleaning of sintex tank incl dismantling inlet and out let connections and re-fixing the same after cleaning for proper functioning to maintain proper water temperature complete all as specified and as directed by Engr-in-Charge.

All as per Item No. 76.00 above, but for 100 LPD capacity.

S&F in replacementof solar water heater silicon 'O' rings for 1000/ 100 LPD capacity complete with all accessories as required at site and as directed by Engineer-in-Charge.

S&F in replacement of ETC glass tube 47mm/ 1500 mm including connected accessories etc complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of ETC tube 58mm dia/ 1800mm length including connected accessories, i.e. silicon ring, etc, complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement heating element for solar heater tank electrical back up system 3.0 KW 230V AC, 50 cycle, triangular/ round type ISI marked complete with rubber gasket including replacing the bolts if any broken during changing the heating elements complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement PVC wire 1.5 sqmm 3 Core PVC insulated cable copper drawn through PVC conduit from looping box to street light fitting terminal complete all as specified and as directed.

All as per Item No. 82 above but 2.5 sqmm 3 core.

All as per Item No. 82 above but 4.0 sqmm 3 core

Dismantling and servicing of stainless steel grill/ blades of air cool flow cooling system and re-assembling and refixing the fan after repairing/ replacing for smooth functioning complete all as specified and as directed.

S&F in replacement of blocking misting nozzles for air cool flow cooling system complete all as specified and as directed.

S&F in replacement replacement of water pump for air cool flow cooling system complete all as specified and as directed.

M&L for rewinding to pressure pump with suitable gauage of copper winding wire with insulation materials complete all as specified and as directed.

Repairing/ cleaning of nozzles with suitable cleaning chemical for air cool flow cooling system complete all as specified and as directed.

S&F in replacement of mist fan motor for air cool flow cooling system complete all as specified and as directed.

S&F 15 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in replacement of air plug suitable for any type capacity of water heater complete all as specified and as directed.

S&F in replacment Weather proof flat twin core auminium cable 1.5 sqmm complete all as specified and as directed.

All as per Item No 93.00 above but 2.5 sqmm.

S&F in replacement of heavy duty, lever type 240 V, AC, NO/NC type limit switch for hanger door size 4.6 x 5 mtrs. complete all as specified and as directed.

S&F in replacement of 8 to 30 mm size, 240 volts, proxy switch for hanger door complete all as specified and as directed.

Overhauling/ servicing of hanger door gear box including greasing/oiling and replacement of minor defective parts complete all as specified and as directed.

S&F in replacement hanger door top roller of size 117.5 mm dia, 42 mm thick made from alloy EN9 material and consisting of 02 Nos ball bearings complete all as specified and as directed.

S&F in replacement of mild steel galvanised wire rope of 6mm dia as existing complete all as specified and as directed.

Overhauling/ Servicing of hanger door 01 HP, 3 phase motor incl winding with super enamled copper wire of suitable gauge and necessary complete all as specified and as directed.

S&F LED street light fitting 35 Watt, 230 V, AC, outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

All as per Item No. 101 .00 above but 70 watt.

S&F LED flood light 70 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

All as per Item No. 103.00 above but 100 watt.

All as per Item No. 103.00 above but 120 watt.

All as per Item No. 103.00 above but 170 watt.

All as per Item No. 103.00 above but 210 watt.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

All as per Item No. 108 above but 40 watt.

Supply and fixing the following spares as per existing type and model for street light/gate light/ search light:-

Copper ballast HPSV/ MH 70 watts.

Copper ballast HPSV/ MH 150 watts.

Copper ballast HPSV/ MH 250 watts.

Copper ballast HPSV/ MH 400 watts.

HPSV/ MH lamp 70 watts.

HPSV/ MH lamp 150 watts.

HPSV lamp 400 watts.

HPSV lamp 250 watts.

Igniter electronic 70-400 watts for SV/ MH lamp.

Porcelain holder for 70 -400 watt.

S&F in replacement of mounting bracket forming 'L' shape having an interior angle of 120 degree made out of GI pipe light grade 50 mm dia for fixing to street light fittings on the poles not less than 1.5 meter long duly painted with aluminium paint two coats complete all as specified and as directed.

S&F in replacement of mounting bracket forming Cap type having an interior angle of 120 degree made out of GI pipe light grade 50 mm dia for fixing to street light fittings on the poles not less than 1.5 meter long duly painted with aluminium paint two coats complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick electrode, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to 4 mm dia galvanized earth wire by means of bolts, nuts, check-nuts and washers of galvanized iron or steel all as shown in electrical plate No 5 (duly protected with 15mm dia light grade GI pipe upto 7.5m from the earth plate) and connected to GI steel earth plate including charcoal, dust, common salt, necessary excavation in soft/ loose soil, returning, filling in and removal of surplus soil to a distance not exceeding 50m from the starting point, watering pipe 20 mm bore GI tube of light grade treated with 1 No PGI funnel, pit of PCC 1:2:4 type B-1/ RCC 1:2:4 type B-1, pit cover 75 mm thick reinforced with 6 mm dia bars @ 75 mm c/c both ways and with MS handle 12 mm dia connected to earth test point including testing complete all as specified and as directed.

M&L for bands, straps, supports or stays for rainwater, ventilating pipes, incuding bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples, chains hand made sliding bolts, clamps hold fasts wall ties hooks for hanging fans, plain agnle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles confrirming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L in replacement of contactor ML 1.5, 3 pole, 415 V complete all as specified and as directed.

S&F in replacement of looping box (enclosures) of size 280x170x130mm made of PVC comprising of 02 Nos aluminium bus bar 100 Amps rating fixed on porcelain insulators, earthing terminal and one MCB SP 6/ 16 Amp including MS bracket, nut an bolts complete all as specified and as directed.

S&F in replacement of old pipe with non metallic rigid/ flexible PVC conduit 25 mm dia complete fixed on pole incuding necessary clamp complete all as specified and as directed.

M&L for writing numbers on pole (as per sample) with stencil cut with white enamel paint over a black painted background 15 cm in height and 15 cm in width complete all as specified and as directed.

S&F radium sticker of red colour, water proof 80 mm wide on around the poles complete all as specified and as directed.

M&L for preparation of old painted surfaces of LT steel tubular poles 9/11m height including brackets and cross-arms if any and applying one coat of synthetic enamel paint of any tint and colour complete all as specified and as directed.

Taking up/ down of old unserviceable UG LT cable up to 16 Sqmm, 2 core of any type from trenches etc complete all as specified and as directed.

Supply and laying or fixing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (H/D) earthed cable aluminium conductor, 1100 volts grade with standed complete all as specified and as directed for 10 sqmm, 2 core nominal cross section in service connections.

All as per Item No. 122 but of cable size 16 Sqmm , 2core.

M&L for excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc. and getting out soft/ loose soil complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm complete all as specified and as directed.

Removing excavated materials not exceeding 50 mtrs away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

Supply and laying clean dry sand for cable cushioning including gently punning down complete all as specified and as directed.

M&L for old size, burnt brick, sub class 'B', laid in trenches, abutting each other with a gap not exceeding 10 mm , vertically over the cable for cable protection complete all as specified and as directed.

M&L in replacement of driver (circuit) suitable for 25/30/50/72/90 watt LED fittings. Make:- Havells/ Bajaj/ HPL/ GE as approved by GE.

S&F in replacement of NATURE SWITCH-02 (sensor along with pre-dawn switching off timer, 4-8 hrs) & NS-INDOOR (sensor for Lux level based switching of outdoor/ semi-indoor lights). Make:- Nature switch or equivalent in HPL/ L&T/ EE.

S&F in replacemetn of IP-65 aviation obstruction light, die cast aluminium housing, red coloured polycarbonate dome and Power consumption 5.8 Watt operating temperature 10-60 degree C LED type with lamp and connection complete all as specified and as directed.

Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nuts of approved size, for LT, 20x15cm size complete all as specified and as directed.

Dismantling concrete poles/ struts, any size, transporting to store and stacking complete all as specified and as directed.

Dismantling and taking down fluorescent tube light single/ double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store (Accessories orcomponents to be provided free for replacement by department) complete all as specified and as directed.

Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60 Amp, accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and as directed.

All as per Item No. 135 above but 3 Phase, 415 volt.

Supply and errecting in replacement of PCC poles with cast iron base plate, finial taper plug, bolts, nuts & screws asspecified type 410 SP-22 (9.0metres long) duly painted internally complete and externally painted with two coats of bituminious paint with two coat of aluminium paint alongwith cap type single arm bracket 1.5 mtr long of size 40 mm dia and providing nuts & bolts complete all as specified and as directed. Note:- Earth work/ excavation/ PCC shall be measured and paid separately.

S&F in replacement garden light 8 W LED height 30 inches, suitable for architectural outdoor light with providing PCC (1:3:6) type C1 foundation & earth work complete so as to fix it properly complete all as specified and as directed by Engr-in-Charge. Note:- Earth work and PCC will be measured and paid separately against respective items.

S&F bus bar chamber of raing 100 Amps TPN factory made dust and vermin proof including bus bar of rectangular cross section of copper strip supported on cast epox insulator at suitable interval heat shrinkable sleeves with powder colour code 01 set of 04 strip of complete with grouting in wall with suitable FI strip bend to shape with PCC work for holding enclouse and complete all as specified and as directed. Make:- Havells, cat part No IHBB010004, 4 way or equivalent make as approved by GE.

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregates) in coping of pole including necessary form work complete all as specified and as directed.

M&L for boring of holes up to 80 mm dia under road pavement, hard standing, etc by trenchless technology using ultra sound technique complete all as specified and as directed by Engineer-in-Charge. Note:- Pipe for protection of cable shall be measured and paid separately.

S&F GI pipe Light grade 50mm bore (ISI marked) laid in trenches/ path/ road crossings/ fixed to poles/ ceiling/ along walls/ path/ drain/ floors with and including all necessary clamps, nuts, bolts, washers etc and all fittings as required, complete all as specified and as directed by the Engineer-in-Charge. Note:- Necessary excavation and earth work shall be measured and paid for separately.

All as per Item No. 142 above but 80mm bore.

Supplying, installing, testing and commissioning in replacement of indoor type totally enclosed weather, dust & vermin proof, CPRI approved, factory made LT wall mounted meter panel board 415 volt, 3 phase, 4 wires, AC, 50 Hz fabricated from 2.00 mm thick CRCA sheet steel and epoxy powder coating in RAL 7032 shade with seven tank treatment process, front opening hinged door with a fully transparent cover made of polycarbonate/ high grade engineering plastic to permit clear view of display, locking arrangement, copper busbar 20mmx5mm insulated with heat shrinkable sleeves, appropriate space for fixing single phase energy meter 05 Nos upto 40 Amps, 40mmx40mmx6mm size angle iron frame, hold fast/ fastener/ bolts/ copper lugs/ spacers/ terminal blocks, rubber gasket, locking knobs, phenolic laminated sheets for live isolation, heat shrinkable sleeves, nuts, bolts, washers, connections from MCCB to busbar, busbar to meter & meter to MCB with single core copper cable of size 10 sqmm connection, R- Y-B LED indications to show 3 phase availability at incomer including the following:-

(i) One number MCCB 63 Amps, 415 volts, 4 pole, 16 KA, thermally adjustable between 70 to 100%. (ii) Temper proof electric meters single phase -05 Nos (Refixing the existing) only alongwith sealing, making sticker of Qtr No in suitable size for identification etc all as directed by Engr-in-Charge). (iii) Five numbers MCB DP 32 Amp, 10 KA, 'C' seriesas approved (one number in each outgoing side of meter).

ALBA AC AND REF SERVICES

Electricals India

Jinendra Chemicals

Shree Krushna Supply Corporation

mahavir industries

SNEH TRADERS

Ramdev and Sons

Shree Builders

Abhishek Enterprises