SPECIAL REPAIRS TO JCO S ACCN BLDG NO P 193 02 X QTRS OF EME BN UNDER THE AREA OF AGE BR I OF GE ARMY CENTRAL JODHPUR (9056/E8)

Amount

Demolition of cement concrete of any thickness and in any position including removal of existing water proofing treatment of any description and bedding in any type of roof and removing rubbish to a distance exc 50 Mtr but not exc. 250 Mtr, complete all as directed.

Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete incl necessary form work if any, complete all as specified and as directed.

M&L for 75mm thick Plain cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate), as in plinth protection including necessary form work laid in alternate bays and filling the joints with bitumen mastic filler, complete all as specified and as directed.

M&L Factory made machine pressed precast conctete interlocking paver block, size 60 mm thick & any shape, rubberised finish confirming to IS 15658-2006, M-35 Grade, with grey cement and pigments, over and including sand cushioning of 25mm thick, complete all as specified and as directed.

M&L Factory made machine pressed precast cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in kerb stone blocks of approved size and setting in cement mortar 1:4, complete all as specified and as directed .

Demolition of stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land, complete all as specified and as directed.

Cutting into old masonry to form toothings for and bonding in new brick or stone work including making good but making good in lime or cement mortar of the same mix as for new walling, complete all as specified and as directed.

M&L for squared rubble walling, Jodhpur type, regular coursed , well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and as directed.

Ditto all as per item no. 8.00 here-in-above, but except stone, complete all as specified and as directed.

M&L precast cement concrete 1:2:4 type C-1 using 20mm graded stone aggregate as in solid block masonry exceeding 10cm width and setting in cement mortar 1:6, complete all as specified and as directed .

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to square rubble walling un-coursed or brought up to courses, complete all as specified & as directed by Engineer-in-charge.

Dismantling of floor / wall tiling of any description including cement mortar bedding / backing coat and removing rubbish to out side MD Land, complete all as specified and as directed.

M&L 25mm thick (average) PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate), as in sub base , the surface of concrete is to be finished even & rough to receive tile flooring surface, with out using extra cement, complete all as specified and as directed.

M&L non skid ceramic tiles (premium quality), coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6, complete all as specified and as directed. Make: Kajaria/ Somany/ Orient bell.

M&L non skid ceramic tiles (premium quality), coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in dado / verticle surface, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4, complete all as specified and as directed. Make: Kajaria/ Somany/ Orient bell.

M & L coloured glazed ceramic tiles (premium quality) of size 450mmx350mmx7mm/ 450mm x 300mm x 7mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles, complete all as specified and as directed. Make: Kajaria/ Somany/ Orient bell. Note:- The tiles shall be in one or more colour patterns incld highlighters all as per approved and directed by Engg-in-charge.

Dismantling of stone slab / floor / wall tiling of any description including cement mortar bedding / backing coat and removing rubbish to out side MD Land, complete all as specified and as directed.

M&L for machine cut Udaipur green stone slab 15 to 18 mm thick, laid in floor and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and mirror polishing complete over and including 15 mm thick screed bed in CM 1:4, complete all as specified and as directed.

M&L Machine cut kota stone slab flooring using 18 to 20mm thick , laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing, grinding and polishing to smooth mirror finish over and including 10mm thick CM 1:4 on backing coat on brick or concrete surfaces, complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises, complete all as specified and as directed.

Racking out joints/ pointing to random rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering, complete all as specified & directed by Engineer-in-charge.

M&L 15 mm thick, plastering in CM 1:6 on stone masonry surfaces ( internal wall surfces) finished even and smooth with out using extra cement, complete all as specified and as directed.

M&L 15 mm thick, plastering in CM 1:4 on stone masonry surfaces finished even and smooth with out using extra cement using integral water proofing liquid as per manufracturer, complete all as specified and as directed.

M&L plastering 10 mm thick in CM 1:3 on concrete surfaces of ceiling , finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for keyed pointing in CM 1:3 to square rubble stone masonry jodhpur type wall surfaces, uncoursed or brought up to courses , complete all as specified and as directed.

Preparing new plastered or unplastered surfaces and applying (3mm thick in two layers) Birla/JK wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of primer on walls, complete all as specified and as directed.

Complete removal of existing treatment of any description on walls and applying wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of primer on walls, complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on wall surfaces, complete all as specified and as directed.

Preparation of old plastered surfaces and applying one coat of white wash on ceiling surfaces, complete all as specified and as directed.

Preparation of old white washed surfaces and applying one coat of white wash on wall surfaces, complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on wall surfaces, complete all as specified and as directed.

Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint incld & over one coat of primer, complete all as specified and as directed.

Preparation of old painted external surfaces of walls and applying one coat of cement base paint, complete all as specified and as directed.

Preparation of new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed .

Preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer, complete all as specified and as directed.

Taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each, complete all as specified and as directed.

Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and as directed .

Taking down Shutters of any description exceeding 1.00 Sq.m and not exceeding 2.00 Sq.m each after easing and adjusting, complete all as specified and as directed.

Taking down Shutters of any description and refixing the shutters in the same opening of any description exceeding 1.00 Sq.m and not exceeding 2.00 Sq.m each after easing and adjusting, complete all as specified and as directed.

M&L mild steel work as in door frame and similar work fixed with angle cleates, confirming to Fe 290 Grade - E - 165, complete all as specified and as directed.

M&L rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165, complete all as specified and as directed.

M&L rolled mild steel sections like hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; and similar work confirming to Fe-290Gde E-165, complete all as specified and as directed.

M&L rolled mild steel sections like fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 mm thick bent to shape incld two coat and similar work confirming to Fe-290Gde E-165, complete all as specified and as directed.

M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a), complete all as specified and as directed.

M&L factory Made flush shutters, 35 mm thick solid core with particle board core construction, both side laminated, as per IS 2202(part-I, 1999) . The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 35mm while the thickness face veneer shall not be less than 0.6 mm, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and as directed.

Taking down steel windows and ventilators ( glazed / fly proof) of any description, complete all as specified and as directed.

S&F Factory made steel window / ventilators with top hung shutters including box type hinges, steel peg stay, glazed window / ventilator, complete all as specified and as directed.

S&F Factory made steel window / ventilators with top hung shutters including box type hinges, steel peg stay, gauged window / ventilator, complete all as specified and as directed.

S&F 200mm size aluminium anodised barrel tower bolts of extruded section, complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 300 mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed .

S&F Stainless Steel butt hinge of size 100mm , medium weight, complete all as specified and as directed.

S&F Mild Steel butt hinge of size 100mm , medium weight, cold rolled, complete all as specified and as directed.

S&F 125 mm long double action spring hinges, mild steel with steel wire spring, stove enameled, black, complete all as specified & directed by Engineer-in-charge.

S&F 140 mm floor door stopper of aluminium alloy body and tongue , anodised ,with hard drawn steel spring ,fixed in floor, complete all as specified and directed.

S&F 4.00 mm thick figured glass,pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and as directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane, complete all as specified and as directed.

S&F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed to Aluminium door/window, complete all as specified and as directed.

S&F in repair GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00mm and fixed to Aluminium door/window, complete all as specified and as directed.

M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in hold fast block concrete, complete all as specified and as directed.

M&L flat iron as in hold fast for door frame and similar work fixed with angle cleates, confirming to Fe 290 Grade - E - 165, complete all as specified and as directed.

S& F in repairs decorative SS curtain rod of 22 to 25 mm dia, including 8 nos PVC rings per running meter of curtain rod, complete all as specified and directed.

S & F in repairs PTMT shelf with bracket guard and railing, including choromium plated brass screws and wooden cleats, (minimum weight not less than 300 gms), complete all as specified and as directed.

S & F in repairs soap dish, PTMT, white of approximate size 160 x 160 x 90 mm embedded in wall, complete all as specified and as directed. Make: Prayag / Polytuf

S & F in repairs PTMT tubular towel rail, 20mm dia, D Typ450mm long between flanges including brackets, complete all as specified and as directed. Make: Prayag / Polytuf

S & F in repairs MS chromium plated peg set of five fixing with wall, complete all as specified and as directed.

S & F in repairs stainless steel kitchen sink with drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm, complete all as specified and as directed. Make: Blue Star/ Nirali/ Jayna

S & F in repairs white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests andPVC 'P' or 'S' trap including provision of cement concrete bedding 1:5:10 type E2, complete all as specified and as directed. Make: Cera / Hindware / Parryware

S & F in repairs (Ivory color) vitreous china ware wash hand basin, flat back of size 550 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long, complete all as specified and as directed. Make: JAQUAR or equivalent model in Cera / Hindware

Dismantling of cast iron / PVC pipes of 100 mm internal dia including fittings, jointed in cement mortar, complete all as specified and as directed.

Dismantling of cast iron / PVC pipes of 75 mm internal dia including fittings, jointed in cement mortar, complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps, complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 75mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps, complete all as specified and as directed.

S & F cast iron branch pieces with ovall access door, single [equal or unequal] ordinary or inverted [spigot and socketed type] or with parallel branches suitable for 100mm dia pipes, complete all as specified and as directed.

S & F Cast Iron Bends [any radius], diminishing pieces or tapers [larger bore measured] of 100 mm bore, for Cast Iron soil / waste / vent pipes, complete all as specified and as directed.

S & F cast iron bends with ovall access door [any radius], diminishing pieces or tapers [larger bore measured] of 75 mm bore, for cast Iron soil / waste / vent pipes, complete all as specified and as directed.

S& F 110 mm bore cast iron vent cowl, complete all as specified and as directed.

S& F 110 mm bore cast iron floor trap, complete all as specified and as directed.

S & F brass chromium plated shower rose of size 15mm with or without swivel joints fixing to steel pipes, complete all as specified and as directed. Make: Jaquar / Cera / Marc

S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe, complete all as specified and as directed . Make: Jaquar

Stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 25 mm bore iron pipe or for unions, complete all as specified and as directed.

Stop valves, two way angular, CP long thread with flange, screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions, complete all as specified and as directed.

S & F CP fancy type 15 mm bore two way bib cock screwed for iron pipe or ferrule of size 15 mm dia, complete all as specified and as directed. Make: JAQUAR or equivalent model in Cera / Hindware

S& F stop valves, 15 mm dia, cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle with long shank and cup [concealed type] for iron pipe etc, complete all as specified and as directed.

S& F bib taps, 15 mm dia, long body with flange, cast copper alloy, chromium plated, fancy type, for iron pipe etc, complete all as specified and as directed. Make: Jaquar/ Marc/ Cera

S&F in repairs, 20 mm bore gun metal, globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repairs, 25 mm bore gun metal, globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repairs, 15 mm bore gun metal, globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S & F in repair CP wall mixer with telephonic shower arrangement ,connecting legs and wall flanges but with out crutch and telephone shower, complete all as specified and as directed. Make: Model No.QQT- 7217 of JAQUAR make or equivalent model in Cera / Hindware / Johnson

S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 600 mm long with PTMT nuts, color of cistern properly match with WC color, complete all as specified and as directed. Make: Cera / Hindware / Parryware

Dismantling of old u/s PVC tank capacity exc 250 ltrs but n. exc 500 ltrs, removing to store / sold to contractor under sch of credit, complete all as per specified and as directed by Engg-in-charge.

S&F in repairs of 500 ltrs capacity rotational moulded polythene water storage tanks (white) three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I, complete all as per specified and as directed by Engg-in-charge. Make:- Sintex Pure / Rotex / Polytuf

Disconnecting existing tanks capacity exc 250 ltrs but n. exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately), complete all as per specified and as directed by Engg-in-charge.

S&F of ball valves for 20mm bore pipe, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (minimum weight 210 gms), complete all as per specified and as directed by Engg-in-charge.

S&F stainless steel plate rack of size 900mm X 600mm X 200mm of approved pattern made out of stainless steel sheet 18 gauge with round 8mm dia rods, complete all as specified and directed. Make: Jayana / Nirali / Bluestar

M&L for 40 mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate), as in water tank plateform, finishing the surface even and smooth without using extra cement, complete all as specified and as directed.

Demolition of cement concrete reinforced in manhole covers in any position not other wise specifically provided and removing debris and rubbish out side MD land, complete all as specified and as directed.

M&L for precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in landings, cover slabs (for man holes etc) chullah hoods,chajjas,water troughs,shelves and similar articles with plain faces, complete all as specified and as directed .

S&F 5 cm thick sand stone slabs Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar (1:4), complete all as specified & as directed by Engineer-in-charge.

Supply only water proofing compound (ISI Marked)

Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing or credited to contractor, complete all as specified and as directed.

Taking up or down 20mm bore steel water tubing and connections including cleaning for refixing or credited to contractor, complete all as specified and as directed.

Taking up or down 25mm bore steel water tubing and connections including cleaning for refixing or credited to contractor, complete all as specified and as directed.

Refixing old GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

Refixing old GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

Refixing old GI tubing (ISI marked) 25mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S&F GI tubing (ISI marked) 25mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided and removal unserviceable materials, debris and rubbish to a distance out side MD land, complete all as specified and as directed.

Use and waste of form work to sides and soffits of lintels, beams, brackets, shelves and similar works for rough finished surfaces of concrete, complete all as specified and as directed.

Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide including rough finished surfaces, complete all as specified and directed.

RCC M-25 design mix as in slabs supported on walls, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

RCC M-25 design mix as in beams and colunms in floors, and the like, complete all as specified and directed.

M&L TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded, complete all as specified and as directed.

M&L TMT steel bars of 6 to 8 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded, complete all as specified and as directed.

M& L for carring out of water proofing treatment in roof in the following stages : (a)- M & L 10 mm thick sceeding in cement mortar 1:3 on brick work or concrete surfaces on roof surfaces mixed with WPC, surface finished even and smooth without using extra. (b)- Apply first coat of bitumen primer confirming to IS 3384-1986 @ 0.40Kg/Sqm. (c)- Second coat of bonding material using hot blown type bitumen confirming to IS- 702-1988 grade 85/25 @1.20 Kg/ Sqm (d) Third layer of 3 mm thick APP modified polymeric membrane with non-woven polyester reinforcement shall be laid by torch application method. The side overlaps of minimum 75 mm and the end laps of minimum 100 mm. All overlaps & joints shall be sealed as per manufacturer's instructions. (e) Fourth coat of bonding material using hot blown type bitumen confirming to IS 702-1998 of grade 85/25 @ 1.20 Kg/Sqm (f) Fifth and top most layer of surface finish 25mm thick PCC 1:2:4 type B-1 using 12.5mm graded crushed stone aggregate in roof padding over APP membrane, the surface of concrete is to be finished even and smooth with using extra cement and provide V shaped groove 6mm wide & 10mm depth filled with mastic bitumen of (1:1), complete all as specified and directed by Engr-in-charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft / loose soil, complete all as specified and as directed .

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil, complete all as specified and as directed.

Removing of excavated material to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crused stone aggregate) as in bed to 150 mm bore RCC drain pipe including forming cradles, complete all as specified and as directed.

S & F 150 mm bore Reinforced cement concrete pipes, one end socketed, class NP-2, laid in trenches and jointed, complete all as specified and as directed .

M&L PCC 1:4:8 type D-2 (using 40 mm graded crused stone aggregate) as in bed to 200 mm bore RCC drain pipe including forming cradles, complete all as specified and as directed.

S & F 200 mm bore Reinforced cement concrete pipes, one end socketed, class NP-2, laid in trenches and jointed, complete all as specified and as directed .

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 200 mm dia of pipe, complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150 mm dia of pipe, complete all as specified and as directed.

Taking out from position, framed woodwork as in cupboards / cabinets etc with all fittings, shutters, shelves, drawers etc in any position (fixed in walls or floors) & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but nexc 1.50 sqm & depthd nexc 60 cm complete.

Providing and fixing poly vinyl chloride (PVC) cabinet/door/shutter frame of width 150 mm & thickness 18 mm, made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw, frame shall be fixed to the wall, using 75mm long M.S. Screws through the frame with PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge.

M&L for 18 mm thick solid PVC sheet with UPVC coated, Celuka printed in one of two different colours ( with wood grain printed pattern / ivory clour finish) as in kitchen cabinet shutters ,and cupboard shutter all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc, complete all as specified & directed .

S&F Continuous (piano) /auto hinges, mild steel, bright finish or electrogalvanised

Extra over PVC boards for lipping 1-1.5 mm thick 18 mm wide complete

S&F '0' degree clip type self closing hinges for cabinets fized with cadimum coated screws all as per sample. Make : Hettich.

S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters

S&F 75mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint drawers Make : Hettich.

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud, complete all as per approved smaple. Make : Hettich.

S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers. Make : Hettich.

M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil as directed by Engineer-in-charge Make : Hettich.

M&L for Cement concrete 1:3:6 Type B2 (using 40mm graded aggregate) in surface channel and drains, complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc . removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.

Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in 20mm dia PVC concealed conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with modular metal flush box of suitable size for mounting of modular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light / fan / bell point controlled by one, one way switch, complete all as specified and directed .

All as per Serial Item No. 143 above but one 3/5 pin socket outlet 5/6 Amps on independent board, complete all as specified and as directed.

All as per Serial Item No.143 above but for one 3/5 pin socket outlet 5/6 Amps on the same board with other switches, complete all as specified and as directed.

All as per serial Item No.143 above but for 15 Amps 5/6 pin socket point on independent board with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire, complete all as specified and directed .

M&L switch piano, flush type, single pole, one way, 5/6 Amps, 230 Volts, complete all as specified and as directed. Make: Legrand / L&T / Schneider

M&L switch piano, flush type, single pole, one way, 16 Amps, 230 Volts, complete all as specified and as directed. Make: Legrand / L&T / Schneider

M&L socket outlet 5 Amps 2-in-1, 3/5 pin 230V AC flush type, complete all as specified and directed. Make: Legrand / L&T / Schneider

M&L socket outlet 6/16 Amps 2-in-1, 3/5 pin 230V AC flush type, complete all as specified and directed. Make: Legrand / L&T / Schneider

S&F bell push, flush type, 5 Amps, 230 Volts, complete all as specified and as directed.

S&F Bell ding dong AC 230 volt single pole, complete all as specified and as directed.

S&F Electronic fan regulator, stepped type, 100 W, AC, 230 Volts, , complete all as directed. Make: Legrand / L&T / Schneider

S&F ceiling rose, 3 phase / PVC / Polycarbonate, isolated body, complete all as specified and as directed.

S& F integrated LED channel tube light fitting, 1X20W, 230V, energy efficient box type, integral, sleek polycarbonate with white acrylic cover epoxy powder coated with fluorscent tube light 1X20W complete with all accesories internally pre wired and connectiong up with twin core twisted flexible copper conductor of suitable size, complete all as specified and as directed. Make:- Havells HEXBTP7IN1S022 or its equivalent in CG / Philips

S&F LED light fitting 1X10W, 2 feet, decorative type,PVC extruded batten complete with retrofit T5 polycarbonate tube rod with connector block etc., complete with accessories pre- wired and including connecting up with three core twisted flexible copper conductor cable with suitable size , complete all as specified and as directed Make : Havells/ Bajaj/Philips/CG

S&F batten lamp holder,metal case body of brass, suitable for LED batten fitting 9W 230 volts, complete all as specified and as directed .

Supply, Fix, connecting and testing of energy efficient, pressure die cast aluminium housing with heat resistant toughened glass with frame & IP-66 protection and impact resistance IK 07, LED street light luminaries 45 watt 5700K, fixed on pole incld. 1.60 mtr long 40 mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mm x 6 mm with nuts, bolts & washers and conductor to fitting with 3 core 1.50 sqmm pvc insulated cable Make : Havells Cat Part No LHETAXU7PN6J045 or techno commercially equivalent model of make Bajaj/Philips/CG

Taking down & hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan

Taking down & hanging only exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan, complete all as specified and as directed.

M&L submain wiring with two runs of 6 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through in PVC concealed conduit with accessories fixed on wall / ceiling and connected to common earth dolly , complete all as specified and directed. Note :- Two runs of 6 sqmm and one run of 4 sqmm shall be measured as one length for the purpose of measurement.

S&F factory made prewired distribution board in sheet metal enclosure in double door with 200A rated bus bar,TPN 4 way, 240V for fixing MCB's, complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

S&F factory made prewired distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's, complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

S&F MCB SP ‘C’ Curve 10KA, 6 to 32 amps, complete all as specified and directed . Make:- Legrand / Havells / L&T

S&F MCB SPN ‘C’ Curve 10KA, 63 amps, complete all as specified and directed . Make:- Legrand / Havells / L&T

S&F MCB TPN ‘C’ Curve 10KA, 63 amps, complete all as specified and directed . Make:- Legrand / Havells / L&T

Taking down existing electric meter of any size any capacity and deposited to E/M store yard and supply and fixing electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60 Amp accuracy class-I 50 Hz, conforming to IS 13779, IP-54, with parameters to show data, time current reading, load, PF, voltage and KWH, complete all as per as specified and as directed

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel including dismentling of existing earth pit etc, complete all as specified and as directed. NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire. Any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of lead wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty solid aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 4 core 16 sqmm , complete all as specified and directed

Note:- 1. All items in BOQ are for"Materials and labour (M&L) /Supply and fix (S&F)" and to be executed in "Repairs " unless otherwise specifically mentioned as "Supply only" or "fixing only" or "Supply and Laying only" in BOQ. Bidders are requested to quote their rates accordingly. 2. The contract amount shall be arrived at after duducting amount of Schedule of Credit from the Total quoted amount.