PROVN OF STORAGE FOR COOKING GAS, INTERLOCKING TILES AT NAE, SHED NEAR BUILDING NO. P-120 TO P-122 AND P-191 AT NOFRA, GARBAGE BIN AND CERTAIN MINOR WORKS AT INS SARDAR PATEL UNDER GE (N) PORBANDAR

Amount

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation, etc. and getting out in hard / dense soil, complete all as specified.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation, etc. and getting out in soft / disintegrated rock complete all as specified.

Excavation over areas n exc 1.50m deep and getting out in hard/dense soil, including forming surface to required slope gradient, complete all as specified and as directed.

Excavation over areas n exc 1.50m deep and getting out in soft / disintegrated rock , including forming surface to required slope gradient, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil, complete all as specified.

Removing excavated rocks to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified.

Removing excavated soils exc. 250m and upto total distance 500m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete or as in sub base complete all as specified and directed.

Stone masonry walling or squared walling in cm 1:6, brought upto courses using dressed same size Porbandar stone of superior quality complete all as specified and directed.

Hard core of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 150 mm thick in each layer, watered and rammed to a true surface, before concerting or otherwise complete all as specified and directed.

20 to 25 mm thick Kota stone slab as in flooring laid over and including 15mm thick screed bed in cement mortar (1:6), set & jointed in grey cement slurry mixed with pigment to match shade of slab, including rubbing grinding and mirror polishing, complete all as specified and directed.

18 to 22 mm thick kota stone slab as in skirting, riser of steps and pillars over and including 15mm thick rendering in cement mortar (1:4) including rubbing grinding and mirror polishing,complete all as specified and directed.

Rendering 10 mm thick on fair faces of stone masonry surfaces or concrete surfaces on wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 15 mm thick on fair faces of stone masonry surfaces or concrete surfaces on wall in CM 1:4 finished even and smooth without using extra cement including mixing water proofing compound, complete all as specified and as directed. (NOTE:- Water proofing compound will be measured and paid separately)

Supply only integral water proofing compound.

Preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion weather proof antifungal paint over one coat of compatible primer as per manufacturers recommendations , complete all as specified and as directed by Engr-in-charge.

Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening preparatory to distempering complete all as specified and directed.

Factory made 35mm thick, 2nd class hard wood , plain framed, panelled shutters, (two panel) with lock rail and, panels shall be of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm long with fixing clips of sheet, cast or extruded sections fixing bolts and sliding bolts of extruded section or cast-aluminium alloy complete all as specified.

200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

150mm extruded aluminium alloy handles, cast type, anodised all as specified.

100mm Butt hinges medium weight, cold rolled, stainless steel, and fixed all as specified.

Powder coated aluminium anodised frame of size as directed for doors, windows and partitions with one or more rebates including necessary joining cleats, glazing clips, rubber neoprene packing, etc complete with powder coating of approved colour minimum thickness 50 micron complete all as specified and directed.

Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

4mm thick sheet glass, ordinary quality and glazing fixed to aluminium door / window with gasket complete all as specified and as directed.

75mm thick PCC 1:2:4 , type B-1 using 20mm graded stone aggregate as in plinth protection finished even & smooth without using extra cement making 10mm wide joints at every 3m interval and at every corner, filled with mixture of bitumen and sand (1:1) complete all as specified.

High tensile galvalume sheets colour coated single skin high rib / multi rib TMP Profile Galvalume sheeting in roof having 1000-1020 mm width 28 mm high crest @ maximum 250 mm pitch (centre to centre) and minimum 190mm manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.

Mild steel rolled or hollow sections such as in main and cross beams, hip and Jack rafters, purlins, where connected to common rafters and running rails etc fixed with angle cleats or flat iron clamps or other connecting arrangements complete Fe 410 -W (Gde E- 250) quality A, complete all as specified and as directed.

Preparation of new steel surface of any description, over 10cm in width or girth, not otherwise described and applying two coats of Synthetic Enamel paint over a coat of red oxide primer complete all as specified and as directed.

12 mm thick pre laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination fixed to timber framework etc including 6 mm thick teak wood leaping & French polishing to edging, complete all as specified and as directed.

Continuous (piano) hinge, mild steel, bright finish or electro-galvanised, width of flaps 40mm (when open), complete all as specified and as directed by Engineer-in-Charge.

60 mm thickness, M-35 Grade Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of complete (with grey cement and pigment) over and including 50 mm thick sand cushioning complete all as specified and directed.

Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil or soft / disintegrated rock complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out and hard/ dense soil , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,including removing of surplus soil complete all as specified and directed by Engr-in-charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out and soft/disintegrated rocks , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,including removing of surplus soil complete all as specified and directed by Engr-in-charge.

PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in foundation of walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

80 mm thickness, M-35 Grade Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of complete (with grey cement and pigment) over and including 50 mm thick sand cushioning complete all as specified and directed.

Preparation of newly plastered surfaces and applying three coats of white wash complete all specified and directed.

Precast reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed, including formwork etc. complete all as specified and as directed.

Mild steel work conforming to Fe-290 Gde E-165 as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, (Posts and Struts in fencing including embedding in concrete etc) drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps, gates wind tie including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work, complete all as specified and as directed by Engineer in Charge.

Supply only chain link M/S Galvanized fencing mesh, complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and as directed.

Rolled mild steel Framed work (rolled mild steel Fe - 410-W (Gde-E-250) quality "A") as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

Roof trusses (framed) made of trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed.

PCC 1:3:6 type C-1 using (20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, and similar work including use & waste of necessary form work complete all as specified and as directed.

Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

1 MM Thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275gm complete all as specified and as directed.

25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in trenches, laying in floors or walls/ceiling on & including saddle and clamps, Complete all as specified and directed.

20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in trenches, laying in floors or walls/ceiling on & including saddle and clamps, Complete all as specified and directed.

15mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in trenches, laying in floors or walls/ceiling on & including saddle and clamps, Complete all as specified and directed.

Galvanised steel water tubing 50mm dia medium grade ISI marked screwed socketed joints complete with all fittings laid in trenches or fixed to wall , floor or ceiling complete with & incl clips,wall hooks,wooden plugs, etc complete all as specified and as directed.

Galvanised steel water tubing 40mm dia medium grade ISI marked screwed socketed joints complete with all fittings laid in trenches or fixed to wall , floor or ceiling complete with & incl clips,wall hooks,wooden plugs, etc complete all as specified and as directed.

Galvanised steel water tubing 25mm dia medium grade ISI marked screwed socketed joints complete with all fittings laid in trenches or fixed to wall , floor or ceiling complete with & incl clips,wall hooks,wooden plugs,etc., complete all as specified and as directed.

Galvanised steel water tubing 20mm dia medium grade ISI marked screwed socketed joints complete with all fittings laid in trenches or fixed to wall , floor or ceiling complete with & incl clips,wall hooks,wooden plugs,etc., complete all as specified and as directed.

20mm PP-R Gate valves (PVC ball insert) complete all as specified and directed.

Brass sprinkler with stand, 20mm bore complete all as specified and as directed

Gun mental globe or gate valves, with iron wheeled head screwed both ends of iron pipes for 20 mm bore pipe fixed Complete all as specified and directed.

Cutting the existing water pipe line of size 25/40 mm dia including necessary excavation & earthwork inserting GI Tee, Union & sockets for making connection upto size of 20mm dia. (Note :- The Quoted rates includes cost of all fitting & earthwork required)

Point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid steel concealed conduit of 20mm dia or higher, medium grade complete with and including all conduit accessories and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick recessed hylam sheet top cover, brass screws, cup washers etc including all cutting / chases etc in walls complete all as specified and directed for the following :-

(a) One light/ fan point controlled by one one way switch, 5Amps.

(b) One flame proof point wiring for Exhaust fan /Fan point controlled by one one way switch,5 amps.

Point wiring with 2.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid steel concealed conduit of 20mm dia or higher, medium grade complete with and including all conduit accessories and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick recessed hylam sheet top cover, brass screws, cup washers with flame proof cable entry glands etc including all cutting / chases etc in walls complete all as specified and directed for Description a for independent switch socket outlet 6 pin 5/15 Amps complete all as specified and directed.

Flame proof and weather proof rotary type switch,16 Amps,230 Volts, AC single pole, (LM-6) aluminium alloy with flame proof cable entry glands CMRS certified,ISI marked rotary type switch, complete all as specified and directed.

Flame proof and weather proof switch socket & plug combination,2P +E,25 Amps,240 V including Flameproof cable entry glands all as directed

Ceiling rose surface Bakelite, 65x50mm, 3 terminals , complete all as specified and as directed.

Sub main wiring concealed with 6 Sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable 1100 V grade, drawn into and including rigid metallic steel concealed conduit 20mm dia or higher, complete with all conduit accessories including 4 sqmm (nominal area) single core PVC insulated FRLSmultistrand unsheathed copper conductor as earth wire and duly connected to common earth point all as Specified and directed by Engr-in-Charge.

Metal body Wall mounting fan 450 mm sweep AC, 240 volts consist of Double ball bearing , oscillating type fixed as per manufacturer instruction, connecting with and including connected using 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable complete all as specified & directed by Engr in charge.

MCB DB Single pole and neutral 8 way double door IP-43,230V having earthing terminal, with 200Amps rated bus bar including making electrical incoming and outgoing connection with lugs/thimbles, complete all as specified and as directed.

MCB SPN 40 Amps,10 KA breaking capacity 'B' Curve suitable 230 V,50 Hz for lighting and other domestic load, complete all as specified and directed.

MCB SP 6-32 Amps,10 KA breaking capacity 'B' Curve suitable 230 V,50 Hz for lighting and other domestic load, complete all as specified and directed .

Flame proof, CMRI certified,LED light fittings decorative 2x 18 Watt surface mounting type extruded metal/aluminium body, electronic LED driver, connector block with all accessories internal prewired & connecting up with 2 core flexible copper conductor cable of suitable size with mounting clamps complete all as specified and as directed. Model No EXTN2LT8-16/20 of CG or Equivalent model of make specified.

Metal body exhaust fan 300 mm sweep AC, 240 volts consist of Double ball bearing & Louvers metal body, 4 Blades, fixed as per manufacturer instruction, connecting with and including connected using 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable complete all as specified & directed by Engr in charge.

Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No4 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work in any type of strata , salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore as watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with CRS Bars 8mm dia at the rate of 100mm centre to centre both way with 12mm dia lifting handle and pit / chamber constructed 50 cm away from the edge in PCC 1:3:6 type C1, Angle iron 40x40x3mm frame for pit cover including testing with (two point method) on completion complete all as specified and directed.

Vastushilp Building Designer

Bharat Enterprise