PERIODICAL SERVICES TO CERTAIN BUILDINGS AND WALL IN GARUDA AREA INCL PAINTING TO HANGARS AT INS GARUDA NAVAL BASE KOCHI IN THE AREA OF AGE BR III NW KOCHI AND COMPREHENSIVE MAINTENANCE INTERNAL E AND M SERVICES TO MD ACCNS OTM ACCNS OF DAD COMPLEX

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed by the Engr-in-charge

M & L for Rendering 15mm thick in cement mortar 1:4 on fair face of brick work or concrete surfaces, finished even and smooth with out using extra cement and with using water proofing compound all as specified and as directed by the Engineer-in-Charge. Note:- WPC will be measured and paid seperately

Supply only for Water Proofing Compound compleate all as specified and directed by Engr-in-Charge.

M&L for 10 mm thick plastering in CM(1:4) finished even and smooth(without using extra cement) on ceiling etc compleate all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in CM(1:6) on fair faces of brick work/concrete surfaces or other than fair face of brick work finished even and smooth without using extra cement compleate all as specified and directed by Engr-in-Charge.

M&L for preparation of new plaster surfaces of wall and applying three coat of white wash on walls all as specified and as directed by Engr -in-Charge .

- Ditto - all as per item No.06 here-in-before but in ceiling compleate all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of walls including cornices (plastered or unplastered) and applying one coat of white wash all as specified and directed by Engr -in-Charge .

All as per item No. 8 above but on ceiling compleate all as specified and directed by Engr-in-Charge.

M&L for preparation of new plaster surfaces of wall and applying two coat of colour wash on walls all as specified and as directed by Engr -in-Charge .

M&L for preparation of old decorated surfaces of walls including cornices (plastered or unplastered) and appling one coat of colour wash all as specified and directed by Engr -in-Charge .

M&L for preparation of old decorated surfaces of walls including cornices (plastered or unplastered) and applying one coat of distemper oil emulsion all as specified and directed by Engr -in-Charge .

M&L for preparation of old decorated surfaces of walls including cornices (plastered or unplastered) and appling one coat of cement base paint all as specified and directed by Engr -in-Charge .

M&L for preparation of new surfaces of walls including cornices (plastered ) and appling two coat of cement base over a coat of priming all as specified and directed by Engr -in-Charge .

M&L for preparation of old decorated wood surfaces of any discription exc 10 cm with or girth and appying one coat of synthetic enamel paint all as specified and directed by Engr -in-Charge .

M&L for preparation of old decorated steel surfaces of any discription exc 10 cm with or girth and appying one coat of synthetic enamel paint all as specified and directed by Engr -in-Charge .

M&L for cleaning a coat of wood filler on new or old works with wood surfaces of any discription exc 10 cm with or girth and appying one coat of french polishing all as specified and directed by Engr -in-Charge .

M&L for preparation of old decorated steel surfaces of any discription exc 10 cm with or girth and appying one coat of aluminium paint all as specified and directed by Engr -in-Charge .

M&L for Writing letter of figures (BLOCK , ROMAN , ITALIN, OR INDIAN ) n exc 30 cm high all as specified and directed by Engr -in- charge . (NOTE; Writing shall be done with thick paint so that they stand out boldly)

Removal of vegetation/ shurbs on unaccessible roofs or projections etc and spraying of acid of required quantity complete from any location of Bldg and making good disturbed surfaces with cement mortar (1:4) or cement concrete type C1(1:3:6) using 20mm graded aggregate including necessary scafolding all complete as directed by Engr -in-charge.

M&L for preparation of old decorated surfaces of walls including cornices (plastered or unplastered) and applying one coat of weather coat ( Appex Paint ) all as specified and directed by Engr -in-Charge .

M&L for complete removal of existing treatment from wall & two coats of antifungal paint over a coat of primer compleate all as specified and directed by Engr-in-Charge.

M&L for one coat of brush bond TGP crustalline capillary water proofing system for cementitious substrates for waterproofing against the positive or negative sides of wall for damp proofing, repairing cracks, plugging holes and stopping active leakage complete all as specified and directed by Engr in charge

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying a coat of apoxy anticorosive paint over a coat of primer for hangar/Truss work (ht aprx 15 m) compleate all as specified and directed by Engr-in-Charge.

Taking down carefully existing unserviceable copper/aluminium point wiring (light, fan, socket or power point etc) complete with fittings/fixtures such as switches sockets, ceiling rose, fan regulators, etc removing materials for taking credit and making good disturbed surface of wall, floors, etc compleate all as specified and directed by Engr-in-Charge.

Material and labour for point wiring with 1. 5 Sqmm PVC insulated (FRLS) sheathed multistranded single core copper conductor cable in and including PVC casing capping of suitable size including 2mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated hylam top cover or PVC moulded switch boards of suitable size including 1.5 Sqmm PVC insulated (FR) multistranded copper conductor earth continuity wire for one light/fan point controlled by one 5A switch all as specified and as directed by the Engineer-in-Charge. Note : Red/yellow/blue coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. for one light/fan/bell point controlled by one switch compleate all as specified and directed by Engr-in-Charge.

All as per item No 26 here-in-before but for one pin 5 A socket outlet same board compleate all as specified and directed by Engr-in-Charge.

All as per item No 26 here-in-before but for one pin 5 A socket outlet independent point compleate all as specified and directed by Engr-in-Charge.

All as per item No 26 here-in-before but with 2.5 Sqmm cable for one 15A switch socket on independent board compleate all as specified and directed by Engr-in-Charge.

All as per item No 26 here-in-before but with 4 Sqmm cable for one AC point compleate all as specified and directed by Engr-in-Charge.

S & F switch piano flush type 5 Amps SP 230 Volts all as specified and directed compleate all as specified and directed by Engr-in-Charge.

S & F ceiling rose surface bakelite 65 x 50 mm 3 terminals compleate all as specified and directed by Engr-in-Charge.

S&F socket outlet 2 in 1 3 pin 5 and 15 Amps flush type compleate all as specified and directed by Engr-in-Charge.

S&F switch piano flush type single pole one way 15 Amps compleate all as specified and directed by Engr-in-Charge.

S & F Socket outlet 2 in 1, 3 pin, 5Amps compleate all as specified and directed by Engr-in-Charge.

S&F fan regulator suitable capacity electronic type 230 V step type. for accommodating along with switch & socket board compleate all as specified and directed by Engr-in-Charge.

S & F in repairs switch piano flush type 5 Amps 2 Way compleate all as specified and directed by Engr-in-Charge.

S&F in repairs Bell push, flush type 5 Amps compleate all as specified and directed by Engr-in-Charge.

S&F in repairs switch 6 A One way SP modualr type compleate all as specified and directed by Engr-in-Charge.

S&F in repairs Moduler socket shuttered 6A, 5 Pin combined 2 module compleate all as specified and directed by Engr-in-Charge.

S&F in repairs switch 16 A one way SP modular type compleate all as specified and directed by Engr-in-Charge.

S&F in repairs Moduler socket shuttered 6/16 A 6 Pin combined 3 module compleate all as specified and directed by Engr-in-Charge.

S&F in repairs Modular bell push flush type single pole 5Amp compleate all as specified and directed by Engr-in-Charge.

S&F in repairs Switch Modular type 6 Amps single pole 2 way compleate all as specified and directed by Engr-in-Charge.

S&F in repairs electronic step type moduler fan regulator, AC 230 Volt, 120W compleate all as specified and directed by Engr-in-Charge.

S&F in repairs Call Bell, AC, 240V, SP, ISI Marked compleate all as specified and directed by Engr-in-Charge.

S&F in replacement switch piano flush type 5 Amps one way compleate all as specified and directed by Engr-in-Charge.

S&F in replacement switch piano flush type 16 Amps one way compleate all as specified and directed by Engr-in-Charge.

S&F in replacement socket 5 pin 5 Amps 5 pin compleate all as specified and directed by Engr-in-Charge.

S&F in replacement of socket 2 in one 3 pin 5 and 15 Amps flush type compleate all as specified and directed by Engr-in-Charge.

S&F in replacement of switch socket combination flush type 5 pin 5 Amps one way compleate all as specified and directed by Engr-in-Charge.

S&F in replacement of switch socket combination flush type 5 pin 15 Amps one way compleate all as specified and directed by Engr-in-Charge.

S&F in replacement lamp holder PVC / Polycarbonate type with backplate for batten fittings / angular fittings compleate all as specified and directed by Engr-in-Charge.

Supply and fixing sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp capacity compleate all as specified and directed by Engr-in-Charge.

S&F in replacement lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, AC, 240V, Pin type, ISI marked and as specified and directed by Engineer-in-Charge.

Supply & fix in replacement Regal Batten for LED tube lights, both side connection type and LED tube rod 1 x 20 Watt, both side connection compleate all as specified and directed by Engr-in-Charge. Make : Havells Cat Part No. REGALBATTENT8 upto 1x822W SSBSWH for Regal Batten & CRYSTAL 1213T8DSTL20W LED 8655 GLASS for tube rod or equivalent Philips/ Crompton

S&F in replacment LED tube light both side connection type 1X20 W compleate all as specified and directed by Engr-in-Charge. Make Havells Cat Part No. CRYSTAL 1213T8DSTL20W LED 8655 GLASS or Crompton/Wipro

S&F in replacment Suspended LED luminaire 1x40 W incl suspention wire, batten pre wired complete including taking down old un servicable light fittings all as specified and as directed by Engineer-in-Charge. Make : Havells Cat No CONSTA 1144LP40WLED840SPCWH or Philips, Crompton & WIPRO

Supply and fix in replacment LED Mirror light fitting with 10 watts, 2KVsurge protection, including suitble clamps, screws etc including taking down old un servicable light fittings all as specified and as directed by Engineer-in-Charge.Make :- Crompton Cat part no. LDL-10-CDL or or Philips,Havells, Whipro & Bajaj

S&F in replacment decorative wall light fixture made up of poly carbonate suitable upto 15 Watt LED bulb including taking out existing light fitting of any type and compleate all as specified and directed by Engr-in-Charge. make . Make Havells CITY3 Cat Part No. LHDLO6160099 or Philips/Wipro

Supply and fix in replacment in existing holder, 9W LED Bulb with B22 base, clear acrylic diffuser, Self declaring R No, power factor .90, 85 lumens light output compleate all as specified and directed by Engr-in-Charge. Make :- Luker Cat Part No. LBGB09CL or Crompton/ Philips

S&F in replacment LED surface type ceiling light 10 Watt with defuser and driver complete including taking out old light fittings compleate all as specified and directed by Engr-in-Charge. Make Luker IP65 ECO CEILING LIGHT Cat Part No. LCL10R or Philips/Wipro

M&L for submain wiring with 2 runs of 4 Sqmm PVC insulated unsheathered multi standrard copper conductor cable and one run of 4 Sqmm cable as earth continuity wire in and including PVC casing caping or surface PVC conduit and making good -the disturbed surface to match with exisitng surface compleate all as specified and directed by Engr-in-Charge. Note : (i) Three runs of 4 Sqmm PVC cable and one run of PVC casing caping or surface PVC conduit will be measured as one unit length.(ii) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

M&L for submain wiring with 2 runs of 6 Sqmm PVC insulated unsheathered multi standrard copper conductor cable and one run of 6 Sqmm cable as earth continuity wire in and including PVC casing caping and making good -the disturbed surface to match with exisitng surface all as specified. Note : (i) Three runs of 6 Sqmm PVC cable and one run of PVC conduit will be measured as one unit length.(ii) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

M&L for submain wiring with 2 runs of 10Sqmm PVC insulated unsheathered multi standrard copper conductor cable and one run of 10 Sqmm cable as earth continuity wire in and including PVC casing caping or surface PVC conduit and making good -the disturbed surface to match with exisitng surface compleate all as specified and directed by Engr-in-Charge. Note : (i) Three runs of 10 Sqmm PVC cable and one run of PVC casing caping or surface PVC conduit will be measured as one unit length.(ii) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

M&L for submain wiring with 4 runs of 10Sqmm PVC insulated unsheathered multi standrard copper conductor cable and two run of 10 Sqmm cable as earth continuity wire in and including PVC casing caping or surface PVC conduit and making good -the disturbed surface to match with exisitng surface all as specified. Note : (i) six runs of 10 Sqmm PVC cable and one run of PVC casing caping or surface PVC conduit will be measured as one unit length.(ii) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

Taking down unserviceable/damaged Sub main wiring any type any size including continious earth wire, conduit/capping casing/consealed and making good disturbed surfaces of walls/ceiling matching with existing colour compleate all as specified and directed by Engr-in-Charge.

S&F in repairs sheet metal enclosure for MCB DB TPN 4 way, double door compleate all as specified and directed by Engr-in-Charge.

S&F in repairs sheet metal enclosure for MCB DB TPN 8 way, double door compleate all as specified and directed by Engr-in-Charge.

S&F in repairs sheet metal enclosure for MCB DB SPN 4 ways, double door compleate all as specified and directed by Engr-in-Charge.

S&F in repairs sheet metal enclosure for MCB DB SPN 8 ways, double door compleate all as specified and directed by Engr-in-Charge.

S&F in repairs MCB TPN DB, IP-43 protection, double door type, 8 way as MCCB incomer compleate all as specified and directed by Engr-in-Charge. Make : L&T Cat Part No. DBVTH008DD or Legrand/ ABB

S&F MCB TPN 100 Amps, 415 Volts compleate all as specified and directed by Engr-in-Charge.

S&F MCB TPN 63 Amps, 415 Volts compleate all as specified and directed by Engr-in-Charge.

S&F MCB SPN 40A compleate all as specified and directed by Engr-in-Charge.

S&F MCB SP 5 TO 40A compleate all as specified and directed by Engr-in-Charge.

S&F energy efficient ceiling fan of 1200mm sweep (5 star rated) 230 Volt 50 Hz including all electrical connection compleate all as specified and directed by Engr-in-Charge. make :- Havells Cat Part No. ES-40 including taking down old unserviceable ceiling fan and depositing with MES Store yard.

Taking down existing ceiling fans of 1200 mm sweep of any make and removing to workshop for following repairs and refixing at same location/ other location compleate all as specified and directed by Engr-in-Charge. (a) Opening & Strip cutting the winding of ceiling fans and re-winding with super enamelled copper wire of suitable/ existing size, with sleeves, heating, baking etc. and re-assembling the same. (b) Replacement of Ball bearings of suitable size. (c) Replacement of fan capacitor of suitable capacity.

Same as item No. 78 here in before but for exhaust fan 250 to 400 mm sweep compleate all as specified and directed by Engr-in-Charge.

S&F Capacitor, 240V, AC, suitable for fans compleate all as specified and directed by Engr-in-Charge for the following:- (a) 2.5 mfd

S&F in replacement of PVC body exhaust fans complete 200/250mm sweep on the same location or where as directed by Engr-in-Charge. Make: Havells Cat Part No. Ventil Air-DX white

S&F in replacement motor assembly for PVC body Wall mounting fan of 400 mm sweep compleate all as specified and directed by Engr-in-Charge.

T L ALOSIOUS

ANIE JOHN CONTRACTORS

MS BUILDERS

SREENARAYANA ENTERPRISES

Jack electrolinks Private Ltd

Oriental Constructions