KMDA/EM/SE/EC-I/NIQ-11 of 2025-26 dated 29.10.2025(2nd Call)

Amount

Supplying & Erection of big size feeder pillar box of Size (1372 x 914 x 607 mm) made up of 3.15 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 coats of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35x35x3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Supplying and fixing Sheet steel Main Switches 415V TPN with fuse on L&N on flat iron frame on wall 30/32 A

Supply and fixing of Quartz Daily Time Switch Used for Automatic switching ON/OFF for Electric street lights, 30-minute Interval with 24-hour Programmable operation 240 VAC Base/DIN Mounting.

Supply & Fixing 2 Pole Power Contactors (Make-L&T, MNX 40-3P or equivalent) Conforms to IS / IEC 60947-4-1 & IEC 60947-4-1, AC1:55A, AC3:40A.

Supply, delivery & connection of Single Core HRFR PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible Cables, 1100 Volt Conforming to IS 694 of following sizes: 1Cx6 sq mm Cu. Conductor

Supply,delivey & fixing water poof junction box,size:140mm x140 mmx95 mm (Make: Hensel/Sintex or equivalent manufacturer)

Supply & delivery of 4 core 4 Sq mm PVC/XLPE insulated Round copper cables as per direction of EIC

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing materials as required: 25 mm dia

Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63] 25 mm

Labour for fitting and fixing high density poly-ethylene pipes or P.V.C. pipes as per direction of the Engineer-in-charge

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 4 Sq mm

Finishing the end of following XLPE/PVC armored cables by crimping method incl. supplying and fixing solder less socket (Dowels make), tapes, anticorrosive paste & jointing materials :4 core 4 Sq mm

Supply of single arm bracket made of 40mm dia 1.5 meter long.

Supplying,Fixing bakelite cable core termination block inside pole slot/loop-in box including making necessary connections as per direction of EIC.

Supply of LED post top, 5700k, min.3500lm, Efficacy> 100 Im/W, Min. 35W, 220-240V, 50Hz, (make-Philips, BGP200 LED35 CW PSU GR CPC SPD or equivalent) made in die-cast aluminium bottom housing and spun aluminium top reflector with decorative clear acrylic diffuser and IP 65 protection, as per technical specification and direction of EIC.

Supply of robust and reliable, high eiificiency with single die ceramic base IP66, CCT-5700K Min. 45W LED, 100 lm/W road lighting luminaire, as per technical specification and direction of EIC. Make-Philips-BRP031 LED45 CW SLR GR PSU SPD or equivalent

Supply of robust and reliable, high eiificiency with single die ceramic base IP66, CCT-5700K Min. 120W LED, 140 lm/W road lighting luminaire, as per technical specification and direction of EIC. Make-Philips-BRP503 LED168 CW R3C PSU S1 or equivalent

Hoisting, fixing and commissioning of luminaries including making necessary connections & earthing attachment (a) HPSV/LED Luminaries

Supply & Delivery of 7 Mtr. Octagonal Poles in 3mm shaft thickness with Top A/F 70 mm, Bottom A/F 130 mm , Base Plate 200x200x12 mm suitable for wind speed 180 Km/hr. as per IS:875 with suitable bracket arrangement to install 1 or 2 no. Led Steet Light A) Material grade of shaft shall be of S355JO/JR as per BSEN 10025 or Equivalent IS: 2062 grade E350 (BR) B) Materials grade of Base Plate shall be E250(BR) as per IS:2062 C) Galvanization as per BSEN ISO:1461 D) Make – Bajaj/ Valmont/Skipper

Supply of 4 Nos. M20X600 “J” Type foundation bolts as per EN-8 Grade (TS-600) manufactured from special steel along with nuts, washers, and templates for 7 Mtr. Pole

Construction of suitable Shallow foundation upto 7mtr. Octagonal Pole with M-20 grad concrete for Pole considering soil bearing capacity (SBC) 10T/sq. mtr. at 2 Mtr. depth with all materials and labour payment made as per PWD civil schedule & as per direction of EIC. Erection of Pole by using of lifting equipment like hydra etc. and fixing of foundation bolts , anchor plate etc. with necessary arrangement & Testing & commissioning of all electrical equipment of Pole like led fixtures, MCBs Terminal etc. with necessary connection

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI- Medium GI Pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. No 6 SWG

Supplying & Erection of mini size feeder pillar box of Size (918 x 561 x 382 mm) made up of 2 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C

Supplying and fixing 240/415 V 6-32 A 4pole MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

Supply, Installation, testing and commissioning of exterior rated Extruded. minum Anodic oxidation LED linear luminaire of 1000mm with Anti-aging and anti-UV high optical efficiency PC opel covers optics fordirect view architectural lighting application including integral driver/non integral driver , as per technical specification and direction of EIC.

Addressing Kit shall automatically write address to a whole group of interconnecting luminaires within minutes. It shall be Miniature industrial design, compact size touch screen. It can be powered by a power bank with a Micro-B type USB port for on-site programming and testing after installation. The product shall be compact in size, compatible with multiple types DMX512 chips, with Built-in test animation effects, 50 card slot to store animation and scenes. The addressing bit shall support standard RDM protocol, searching for RDM luminaires and static detection, Color-pick functions, and can be powered by Micro-B type USB power supply.

Supply of RDM 6Wall Splitter and Booster, should be able to provide 6-output DMX/RDM splitter with OMX/RDM pass through supporting bil directional communications for discovery. addressing and DMX control of Ethernet/DMX products. This unit takes the incoming DMX/ROM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6x32. The output terminals are electronically isolated from the Input & RDM-through port and share a common ground reference. All six output ports have an independent output driver to boost the DMX/ROM signal as per technical specification and direction of EIC.

3C x 2.5 sq.mm. cu Arm. Cable-Shielded as per technical specification and direction of EIC.

Cat-6 Cable Shielded Arm as per technical specification and direction of EIC.

Installation of faced lighting including additional accessories for installing the light as per final drawing/site condition consisting of brackets, angles, conduits, hardware like fasteners, nut & bolts, Mounting Clamp, IP67 male & female Connector, internal earting, Distribution Board including MCB's, Leader cable, IP-68 Junction boxes including all accessories & quantity as required to complete the full installations as per satisfaction of EIC.

Programming charges as per technical specification and direction of EIC.

Attending/Inspection/guarding/maintenance of Street Light points/facade lighting to ensure uninterrupted glowing of points including switching ON/OFF operation, restoration of fault, repairing & replacement of spares (to be supplied free of cost) including all type of maintenance job i.e., pole foundation, fixing of arm bracket, fixing of pole boxes, Wiring, fixing of accessories at feeder pillar boxes, socketing and jointing of cables, replacement of fuse wires etc., contact to WBSEDCL for power restoration as and when required and report of total glowing and non-glowing points of the site to EIC in once in a week with 1nos Electrician and necessary activities as per technical specification & satisfaction of EIC.

RASH ELECTRICAL WORKS (BID ID -7423462)

Leksa Lighting Technologies Pvt. Ltd. (BID ID -7366648)