Providing and fixing of Office Furniture and Compactor for the use at Office of DGCoA, Shahjahan Road, Kota House, Delhi

Bill of Quantity (BoQ)

Name of WORK: Providing and fixing of Office Furniture and Compactor for the use at Office of DGCoA, Shahjahan Road, Kota House, Delhi

SL NO DESCRIPTION/ SPECIFICATIONS IMAGE/DRAWING QTY UNIT UNIT PRICE AMOUNT

LINEAR WORKSTATION WITH STORAGE Supply Installation and fixing of

SIZE- 1500W X1500x 600D X 750HT TABLE TOP AND 1200HT PARTITION WITH 1200MM RETURN PARTITION-Main Partition:-Partition is made of 50mm

thick NEO based system with half glass marker & fabric magnetic tile above table top and laminate tile below the table top.

Return Partition(only in starting and last of each row): Partition is made of 50mm thick NEO based system with fabric magnetic tile and inside above table top

and laminate tile below the table top.All out side tile will be fabric above & laminate below the table top.Wire Management: Raceways are provided BTT only

main spine and skirting on main (inside) spine for power and data cable management. 65mm dia grommet hole is provided for wire access. 3Dr padestal

(2D+1F):- 400x450x650HT MM.The structure is made out of 18mm Thick Pre-Laminated Particle Board. Finger groove handles, central locking system ,

levellers & other necessary hardware are priovided. with PP keyboard tray and CPU trolly

Specifications: Table Top - All table tops will be made out of PLB will be E1- P2 25mm Pre-laminated particleboard (PLB) confirming to IS-12823:2018 with 2

mm PVC edge banding. The table top will be made in PLB( Pre laminated board) with the density of 680kg/m³ and 25mm thick one side pre-laminate board

confirming to IS-12823: 2018. Surface: CPL( continuous pressure laminate) in 0.5mm thickness in melamine finish. The PVC edge band will be confirming to

to IS 4892 standards. Edge band used have good resistance to light fastness, impact resistant and highly resistant to heat and solvents.2 mm thick PVC edge

band will confirm to DIN 68861 for resistance to clearers. The edge band material should have Shore D hardness of 79± 4. The Hot melt glue used for fixing the

PVC edge band should have ISO 9001- 2015 quality certification confirming to ASTM D 4499 standards for viscosity and thermal stability. The edges should be

PVC Edge banded with matching finish or have an option of reverse water fall edges. Support - The PLB Gable end supports are offered in both 18 mm PLT

(laminated in the same finish both sides). The PLB will be confirming to IS 12823 : 2018. MS leg support should confirm to IS 4923 : 1997, IS 3074.

Wiremanagement - Cable management.The system should have effective Cable management system. The data and the power cables should be at different

levels (called Raceways) to maintain the separations as per the IT norms minimum 300 mm apart. The wire management slots in the frames are large enough

to manage high volume of data cables (CAT-6) - approx- 40-50 CAT-6 cables. Vertical movement of the cables in addition to the two/ three levels of horizontal

passage should be possible. The raceway covers should be designed as “clip on” raceway which permits easy removal and fixing. No screws/nut bolt should be

used. The Skirting raceways are 120 mm and the raceways at the table top level are of 120 mm. The length of the raceways will be matching to the frame

width. All standard electrical/Data faceplates should be capable of being be mounted on the raceways at both the levels. The raceways will be provided with cut

1 outs as per the requirement of the switches/sockets. The switches /sockets to fixed fixed “staggered” to ensure electrical safety. Option of additional raceway 28 Nos ₹ 60,298.00 ₹ 16,88,344.00

should be available to accommodate more cables (if >50 CAT-6 cables) or sockets. PARTITION:-The partition based system will be with main spine in 50 mm

thick made by 1,2 mm thick CRCA sheet confirming to IS 513: (2008), IS 13871:1993. The end partition is 50 mm. The profile of verticals should be able to

slide the tiles thickness of 6 mm. The verticals will have multiple slots for carrying the data and power cables and provision for fixing MS brackets.There will be

minimum three slots at different levels to accommodate raceways at skirting and table top levels. There should be options of carrying the cables both above

and below the table top as per the requirement. The slot provided should be of size- 150x 25 mm. the slot cut out should made by CNC machines to avoid

sharp edges and burr. There will be minimum four horizontal members in each frame- top , middle levels and at the skirting level. The horizontal members will

be made from CRCA sheets formed in “C” shape in hydraulic press. The CRCA sheets will be confirming to IS 513: (2008), IS 13871:1993.All the Frames are

duly powder coated in charcoal black color or color of choice to a thickness of 50-60 microns confirming to ASTMB – 117, ISO – 1520 and ISO – 1518 &

ASTMD - 2794. The powder coating will be done with NANO Ceramic coating.All the Frames are duly powder coated in charcoal black color or color of choice

to a thickness of 50-60 microns confirming to ASTMB – 117, ISO – 1520 and ISO – 1518 & ASTMD - 2794. The powder coating will be done with NANO

Ceramic coating.

Workstation is provided with Fabric Magnetic, Glass Marker and Laminate tile.

• Glass Marker tiles: 5mm Glass with white Vinyl Backing. The glass will confirm to ASTM C1036.

• Laminate Tile: Constructed out of 6mm thick Pre-laminated Particle board confirming to IS – 12923.

• Fabric Tile: Constructed out of 5.5mm thick Medium Density Fiber Board (MDF) confirming to IS – 12406 and covered with Fabric of choice. The fabric used

will be confirming to BS EN 1021-1, BS 7176 & ISO 105-B02. The glue used for upholstery are made with advanced adhesives confirming to ASTM D 1500,

ASTM 1298 standards. Sprayed with upgraded machines to ensure uniformity and best adhesion.

• Magnetic tile: Constructed out of 0.8mm Galvanized sheet confirming to IS 277, ASTM A653 specifications. Sheets are post treated with NC (Noncromat

coating - Cr free coating) and covered with Fabric of choice. The fabric used will be confirming to BS EN 1021-1, BS 7176 & ISO 105-B02. The glue used for

upholstery are made with advanced adhesives confirming to ASTM D 1500, ASTM 1298 standards. Sprayed with upgraded machines to ensure uniformity and

best adhesion. 25mm thick Pre laminate particle board with 2mm PVC edge lipping.

Support - 18mm thick Pre lam gable ends.

IMAGE FOR REFERENCE ONLY

Digitally signed by AMIT

SINGH 12:47:28 IST

SL NO DESCRIPTION/ SPECIFICATIONS IMAGE/DRAWING QTY UNIT UNIT PRICE AMOUNT

Supply Installation and fixing of CHAIR FOR WORKSTATION

* Allworks Medium Back Mesh Chair

* Fabric Upholstered Cushion Seat

* Single Lock Synchro Mechanism

* Adjustable Lumbar Support

* One Way Adjustable Armrests ( Height)

Supply Installation and fixing of CHAIR FOR CONFERENCE ROOM(Head Chair)

FP Invention High Back Chair with Multilock Mechanism , Gaslift & Two Way Adjustable Arms (Height & Swivel) with Chrome Base - Leatherette Seat & Back

Supply Installation and fixing of CHAIR FOR CONFERENCE ROOM(revolving chair)

4 FP Invention Medium Back Chair with Multilock Mechanism , Gaslift & Two Way Adjustable Arms (Height & Swivel) with Chrome Base - Leatherette Seat & 22 Nos ₹ 23,895.00 ₹ 5,25,690.00

Supply Installation and fixing of CHAIR FOR CONFERENCE ROOM

FP Invention Visitors Chair with Chromeplated Sledge Base & Fixed Arms - Leatherette Seat & Back

Supply Installation and fixing of CHAIR FOR MEETING ROOM(Head Chair)

* Astro Medium Back Mesh Chair

6 * Fabric Upholstered Cushion Seat 1 Nos ₹ 17,169.00 ₹ 17,169.00

* Single Lock Synchro Mechanism

* Adjustable Lumbar Support

* One Way Adjustable Arms (Height)

Digitally signed by AMIT

SINGH 12:47:28 IST

SL NO DESCRIPTION/ SPECIFICATIONS IMAGE/DRAWING QTY UNIT UNIT PRICE AMOUNT

Supply Installation and fixing of CHAIR FOR MEETING ROOM

* Astro Medium Back Mesh Chair

* Fabric Upholstered Cushion Seat

* Single Lock Synchro Mechanism

* Adjustable Lumbar Support

* One Way Adjustable Arms (Height)

Supply Installation and fixing of Main Body: (a) Construction: Rigid Knock Down construction made of 0.8 thk. CRCA Steel. Each unit has 5 loading levels formed by 4 nos.

adjustable shelves. The body comprises the following components: Front Cover: It is the foremost panel of the body on which the Drive unit are fixed. It is made of 0.8 thk.

CRCA Steel. The front cover has a pattern of holes on the front surface for ventilation purpose. Back Cover: It is the backmost panel of the body and is the mirror image of

the front cover. It is made of 0.8 thk. CRCA Steel. The back cover has a pattern of holes on the surface for ventilation purpose. Back Panel: The back panels are made of 0.6

thk. CRCA Steel. The two back panels are fixed together using machine screws. When the entire optimizer layout is locked it also prevents access to inside files from the

outside. Shared Panel: The shared panel acts as a partition between two adjacent bodies. It is made of 0.8 thk. CRCA Steel. Optimizer Height from ground is 2083 mm (1980

body + 65 undercarriage + 38 channel system). Overall size of one bost shall be 1200mm W x 400mm D. The bodies including shelves are given antirust surface treatment &

are coated with epoxy polyester powder. It involves an 8-step treatment. Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film

Thickness of minimum 40 microns. Shelf: It is made of 0.7 thk CRCA steel conforming to IS: 513 Gr.D or DD. Its max load bearing capacity is 100 Kg uniformly distributed per

shelf. Shelves are mounted on support brackets & shelf level can be adjusted at approx. 25.4 pitches. Storage capacity:- The shelf is 1180mm in length and can hold up to

13 nos. of box files of size 85mm x 345mm x 285mm. Drive Type Understructure:- The Understructure is a welded frame suitably fabricated to bear the loads based on

configuration. The frame consists of the following parts: Main channel, body-fixing channel, U-channel and Z-channel. All the components are made of HR sheet 3 mm thk.

conforming to IS:2062. In case of drive type movement of units is achieved by rotating a PU hand wheel. The hand wheel comprises of a welded metal frame which is then

covered by PU using insert-molding process. The metal frame is made of 3 mm thk. HR conforming to IS:2062. (Make: GODREJ / Featherlite)

TOTAL amount including

TOTAL amount including

Digitally signed by AMIT

SINGH 12:47:28 IST