Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹9.8 LAccepted-AOC | l1 | Accepted-AOC Bidder Lower side amount | |
| 2 | l2₹10.5 L+₹66,100 (6.75%)Rejected-AOC | l2 | Rejected-AOC Bidder higher side amount | |
| 3 | l3₹11.1 L+₹1.3 L (13.3%)Rejected-AOC | l3 | Rejected-AOC Bidder higher side amount | |
| 4 | l4₹11.2 L+₹1.4 L (14.5%)Rejected-AOC | l4 | Rejected-AOC Bidder higher side amount | |
| 5 | l5₹11.5 L+₹1.7 L (17.7%)Rejected-AOC | l5 | Rejected-AOC Bidder higher side amount |
| Sl No | Description | Qty | Unit | ABTAR SINGH AND COMPANY L3 | H.N.SINGH AND COMPANY L2 | JASPREET SINGH L1 | ARUN INFRATECH L5 | SUMIT KUMAR L6 | M/S SHYAM ENGINEERS L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Transpiration of suitable truck mounted DTH / ODEX / Percussion / Calyx / RC/ODX method for drilling rigs along with necessary accessories etc to the site of work and erection of rig including leveling of site etc, complete in all respect as per direction of the Engineer-in-charge. | 1 | No. | 30,000 ₹30,000 | 32,000 ₹32,000 | 30,000 ₹30,000 | 11,000 ₹11,000 | 12,000 ₹12,000 | 10,000 ₹10,000 Lowest |
| 2.00 | Development of site including leveling at site through all kinds of roads, approaches field etc. within all leads and lifts as per the direction of Engineer in charge. | 1 | No. | 10,000 ₹10,000 Lowest | 11,500 ₹11,500 | 10,000 ₹10,000 Lowest | 16,000 ₹16,000 | 16,500 ₹16,500 | 15,000 ₹15,000 |
| 3.00 | Drilling of bore of 200mm/220mm dia as per specifications laid down in IS-2800-1991(Part-I) with up-to-date amendments, if any with Percussion / Calyx / RC/ODX method required for drilling in in collapsible strata conglomerate, boulders, pebbles, sand gravels, silt, clay etc. including the cost of attachments extractable casings, consumables water, POL, gravel pack in annular space etc. complete in all respect as per the direction of the Engineer in charge. | 70 | Metres | 9,500 ₹6,65,000 | 8,500 ₹5,95,000 | 8,000 ₹5,60,000 | 7,150 ₹5,00,500 | 7,200 ₹5,04,000 | 7,000 ₹4,90,000 Lowest |
| 3.10 | Supply and lowering of IS-Marked Electric Resistance Welded M.S. pipe 200mm.dia nominal size housing, 6.40mm.thick having outside diametre 219.10mm.screwed and socketted confirming to IS-4270-2001 with up-to-date amendments, if any, about 3.00 Metres to 6.00 Metres in length, welded without any circumferential joints into bore hole in any vertical position including cost of all scaffolding derricks, poles, clamps embedded in foundation extra including cost of all cuttings, threading and welding of pipes etc. complete in all respect as per the direction of the Engineer in charge. | 35 | Metres | 3,200 ₹1,12,000 | 3,200 ₹1,12,000 | 3,000 ₹1,05,000 Lowest | 5,200 ₹1,82,000 | 5,300 ₹1,85,500 | 5,000 ₹1,75,000 |
| 3.20 | Supply and lowering of IS-Marked Electric Resistance Welded M.S. pipe 200mm.dia nominal size housing, 8.00mm.thick having outside diametre 219.10mm.screwed and socketted confirming to IS-4270-2001 with up-to-date amendments, if any, about 3.00 Metres to 6.00 Metres in length, welded without any circumferential joints into bore hole in any vertical position including cost of all scaffolding derricks, poles, clamps embedded in foundation extra including cost of all cuttings, threading and welding of pipes etc. complete in all respect as per the direction of the Engineer in charge. | 35 | Metres | 3,200 ₹1,12,000 | 3,500 ₹1,22,500 | 3,000 ₹1,05,000 Lowest | 5,600 ₹1,96,000 | 5,700 ₹1,99,500 | 5,500 ₹1,92,500 |
| 4.00 | Labour charges for making slot in M.S pipe within all leads and lifts complete in all respect as per the direction of the Engineer in charge. | 24 | Metres | 1,500 ₹36,000 | 1,200 ₹28,800 Lowest | 1,200 ₹28,800 Lowest | 6,600 ₹1,58,400 | 6,650 ₹1,59,600 | 6,500 ₹1,56,000 |
| 5.00 | Providing and fixing casing shoe 200mm MSERW pipe as per requirement of ODEX attachment within all leads and lifts complete in all respect as per the direction of the Engineer in charge. | 1 | No. | 3,000 ₹3,000 Lowest | 3,500 ₹3,500 | 3,000 ₹3,000 Lowest | 16,000 ₹16,000 | 17,000 ₹17,000 | 15,000 ₹15,000 |
| 6.00 | Collection and preservation of soil samples in polythene bags complete in all respect as per the direction of the Engineer in charge. | 1 | No. | 2,000 ₹2,000 | 2,200 ₹2,200 | 2,000 ₹2,000 | 120 ₹120 | 130 ₹130 | 100 ₹100 Lowest |
| 7.00 | Development of Tube-Well and yield testing with Air Compressor 90°V notch and disinfection etc. complete in all respect as per IS 2800-1979 abd as per the direction of the Engineer in charge. | 1 | No. | 1,00,000 ₹1,00,000 | 1,00,000 ₹1,00,000 | 1,00,000 ₹1,00,000 | 21,000 ₹21,000 | 22,000 ₹22,000 | 20,000 ₹20,000 Lowest |
| 8.00 | Development of Tube-Well by continuous over Pumping method with V.T.Pumps/Submersible Pumps of suitable capacity not less than double the discharge established by the Compressor method/design discharge, until the well sand free as per IS-11189:1985 with up-to-date amendments, if any; complete in all respect as per the directions of the Engineer-in-Charge. The draw-down and discharge to be established by running the VT/Submersible pump continuously for 8 Hours in the presence of the officer not less than the rank of the Assistant Engineer. | 8 | Hours | 5,000 ₹40,000 | 4,800 ₹38,400 | 4,500 ₹36,000 Lowest | 6,500 ₹52,000 | 6,700 ₹53,600 | 6,000 ₹48,000 |
Tender Value
₹8.9 L
EMD Value
₹17,720
Closing Date
20 Dec 2025, 11:00 amClosed
Anund Blouria
Jal Shakti Division Nurpur
Drilling, lowering of Assembly and development of (200, 220mm dia) Mini Tube-Well at LWSS Nurpur town Ward No-10)
2025_HPIPH_123082_1
EE.NPR-EA-I-Tender on20-12-2025
Open Tender
Civil Works
Item Rate
30 days
Nurpur
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
₹17,720
6 Feb 2026
10 Dec 2025
20 Dec 2025
10 Dec 2025
20 Dec 2025
10 Dec 2025
Supply and lowering of IS-Marked Electric Resistance Welded M.S. pipe 200mm.dia nominal size housing, 6.40mm.thick having outside diametre 219.10mm.screwed and socketted confirming to IS-4270-2001 with up-to-date amendments, if any, about 3.00 Metres to 6.00 Metres in length, welded without any circumferential joints into bore hole in any vertical position including cost of all scaffolding derricks, poles, clamps embedded in foundation extra including cost of all cuttings, threading and welding of pipes etc. complete in all respect as per the direction of the Engineer in charge.
Supply and lowering of IS-Marked Electric Resistance Welded M.S. pipe 200mm.dia nominal size housing, 8.00mm.thick having outside diametre 219.10mm.screwed and socketted confirming to IS-4270-2001 with up-to-date amendments, if any, about 3.00 Metres to 6.00 Metres in length, welded without any circumferential joints into bore hole in any vertical position including cost of all scaffolding derricks, poles, clamps embedded in foundation extra including cost of all cuttings, threading and welding of pipes etc. complete in all respect as per the direction of the Engineer in charge.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
form_6.pdf
Tender Documents • 0.11 MB
Termsandconditions.pdf
Tender Documents • 0.20 MB
BOQ_180782.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .