Road work

No. figures Amount

1 Box cutting the road surface to proper slope and camber for 1470.00 Cum 104.21

making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed within all

lead and lift.

2 Earthwork in cutting in all sorts of soil and soft murrum including 142.00 Cum 127.75

conveying and spreading the stuff, embankment as and where

directed within 200meters from the end of the cutting with all

required lead and lift.

3 Providing, laying and spreading Granular sub base (Grade-I) by 630.00 Cum 943.34

providing close graded MCBT material in single layer with motor

grader on prepared surface, mixing by mix in place method with

rotavator at OMC and compacted with vibratory roller 80 to

KN static weight to achieve desired density etc. completed.

4 Providing & laying compacted WBM Grading-II using MCBT 420.00 Cum 1331.18

metal of size 53mm to 22.4mm in required layers including using

24% stone screening, 11.2mm size and 8% stone dust as filler

including spreading, watering and consolidation by vibratory roller

as per MORTH specification etc complete as directed by

engineer in charge.

5 Earthwork for embankment including breaking clods, dressing 728.00 Cum 183.70

with all lead and lift including rolling with power roller, watering

and consolidation from borrow pits within land width.

6 Providing and laying compacted of specified quarry spaull in side 72.00 Cum 771.64

shoulder including carraige of material and spreading on

prepared base including compacting as per MOST specification

etc. complete.

7 Providing and fixing ordinary kilometer stone of precast C.C. 1.00 No. 704.34

1:2:4 including necessary reinforcement as per IRC type design

in C.C 1:4:8 including painting, lettering etc. complete. (For ODR,

8 Providing and fixing Hectometer stone as per I.R.C. type design 4.00 No. 356.50

including painting, lettering etc.complete (i) Fixing in C.C. 1:5:10.

9 Providing and fixing Guard stone as per I.R.C. type design 10.00 No. 349.11

including white washing etc. complete (i) Fixing in C.C. 1:5:10.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

10 Hazard Marker Sign :- Providing and fixing sign boards made out 1.00 No. 3518.69

of 2mm aluminium sheet / 4mm ACP (Aluminum composite

panel) size 90 x 30 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint reflectorised with Micro Prismatic Grade retro

reflective sheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T. Specifications; 1.8mtr long stand post of 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with best

quality epoxy coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC block of size

x 45 x 60 cms. for each leg including excavation, curing etc.

complete under the supervision of engineer in charge. A

warranty for 7 years for the retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting

11 Village Name / Bump Ahead Sign :- Providing and fixing sign 3.00 No. 6397.44

boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite panel) size 90 x 60 cms. rectangular as

per design of IRC-67-2012. Pre treated with phospheting process

& acid etching, coated with one coat of epoxy primer and two

coats of best quality epoxy paint; reflectorised with Micro

Prismatic Grade retro reflective sheeting of Type-4 as per ASTM

D- 4956 and latest M.O.S.T. specifications; 3.3mtr long stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm;

painted with best quality epoxy coatings in black and white

bends. The details of symbol or inscription/letters / numerals for

each board shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

Cms. for each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for

years for the retro reflective sheeting from original manufacturer

& a certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective sheeting

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

12 Direction (Junction) Sign :- Providing and fixing sign boards 2.00 No. 21287.51

made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite panel) size 244 x 122 cms. rectangular as per design

of IRC-67-2012. Pre treated with phospheting process & acid

etching, coated with one coat of epoxy primer and two coats of

best quality epoxy paint, reflectorised with High Intensity

Prismatic grade retro reflective sheeting of Type-4 as per ASTM

D-4956 and latest M.O.S.T. Specifications; 4.0mtr (2 Nos.) long

stand post of Iron angle 75 x 75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable size iron angle of

50 x 50 x 5mm; painted with best quality epoxy coatings in black

and white bends. The details of symbol for each board shall be

as per the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC block of size 45 x 45 x 60 cms. for each leg

including excavation, curing etc. complete under the supervision

of engineer in charge. A warranty for 7 years for the retro

reflective sheeting from original manufacturer & a certified copy

of 3 year outdoor exposure test report from third party test

lab for the product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting

13 Citizen's Information Board : Providing and fixing of typical 1.00 No. 23062.34

information board as per instruction. Two M.S. plate of 1.6mm

thick of 900mm x 750mm size fixed at top and bottom duly

welded with M.S. angle with angles of 25 x 25 x 5mm thick M.S.

plate shall be welded by two vertical M.S. flat and four horizontal

M.S. flats 5mm thick to 75mm x 75mm of 12 SWG square tube

posts duly embedded in cement concrete M-15 grade C.C.

blocks of 600 mm x 600mm x 750mm below ground level.

Painting new letters and figures of any shade with ready mixed

synthetic enamel paint of superior quality in required shade and

coloured, all sections of frame joints and steel tube will be

painted with primer and two coats of epoxy paint as per drawing

clause 1701 & Annexure 1700.1 (10.16).

14 Road marking with hot applied thermoplast compound with 180.00 Sq.m. 367.73

reflectorising glass beads on bituminous surface and laying of

hot applied thermoplastic compound 2.5mm thick including

reflectorising glass beads @250 gms/sqmt area, thickness of

surface applied glass beads as per IRC 35. The finish surface to

be level uniform free from streaks and holes.

15 Supply & fixing logo board of MMGSY diamond size (600mm x 1.00 No. 22509.87

600mm) 16 gauge & board plate size (900mm x 250mm)

gauge thick M.S plate and 2.40 mt. deep length single angle 75 x

75 x 6 mm size including fitting and painting lettering with

luminous color as per drawing etc. complete.

16 Providing and laying in foundation with ordinary cement concrete 420.00 Cum 3105.11

M-100 mix and providing necessary vertical pin headers

including formwork, vibrating, ramming and curing complete.

17 Providing and casting in situ controlled cement concrete M-250 840.00 Cum 5293.41

mix with Trimix C.C. Road laid as directed including vibrating,

curing and filling in joints with bitumen complete.

18 Providing and fixing I.S.I. mark T.M.T. Bar Fe-500D 11600.00 Kg. 76.21

reinforcement for R.C.C. work including binding, bending and

placing in position complete upto floor two level.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

19 Supplying, fixing and joining reinforced concrete heavy duty non- 40.00 Rmt. 1028.03

pressure pipes carrying Indian Railway standard with collars for

culverts carrying heavy traffic as per Indian Railway standard

specification including setting and joining the pipes in C.M. 1:2

watering and laying (to level or slopes) of I.S. class NP4 of

300mm internal diameter.

TOTAL Rs.

i.e. Rs. Eighty Three lacs Seventy Two thousand Four hundred Fifty Nine and Fifty Six paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me

and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Ankleshwar Bharuch Bharuch