SPECIAL REPAIR TO BLDG NO NP-88 GK HRDC OF HQ 11 RAPID (H) AT AHMEDABAD CANTT

Amount

Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified and directed.

M & L brick work with sub class "B"brick (old size) straight or curved on plan exc 6m mean radius in CM 1:6 completed all as specified.

Taking down cement or cement lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed.

M & L for rendering 15mm thick on fair faces of brick/ concrete surfaces in CM (1:4) mixed with water proofing compound @ 3% by weight of cement or as per manufacturers instruction finishing the surface even and smooth without using extra cement complete all as specified and directed. (WPC measured and paid seperately).

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed.

M & L for preparation of new plastered surfaces on walls and applying two coats of exterior emulsion paint with anti algal properties (Apex ultima or equivalent) with white exterior wall care putty on over one coat of primer on walls complete all as specified and directed.

M & L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant priming paint wall care putty complete all as specified and directed.

M & L for complete removal of old plastered surfaces on walls and applying two coats of oil bound distemper over wall care putty with priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

M & L for 10 mm thick rendering on ceiling surfaces in any position in CM (1:3) and finishing the surfaces even and fair complete all as specified and directed.

M & L for preparation of new plastered surfaces on ceilings and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant priming paint with wall care putty complete all as specified and directed.

M & L for complete removal of existing treatment of ceilings and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant priming paint with wall care putty complete all as specified and directed.

Taking down chowkhats or frames area exc. 1.50 Sqm and n. exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F mild steel frame work as in door frames, conforming to Fe-410W (Gde E-250) including fixing of holdfast and hinges complete all as specified. (Note - Hinges shall be measured and paid separately)

M & L for Second class hardwood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete complete all as specified and directed

S & F Factory made solid panel PVC door /cupboard shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drawing complete all as specified and directed.

S & F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, rubber gasket, aluminium beading etc including taking down existing vantilator complete all as specified and directed.

S & F powder coated anodised Aluminium alloy sections sliding windows with frames of Jindal or equivalent and 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4 mm nominal thickness one shutter with stainless steel wire cloth .36mm dia and average width of aperture 1.4mm , aluminium alloy handles/lock etc. complete all as specified and directed. Note: Thickness of chowkhats/Frame section and sliding shutter section shall be minimum 1.5mm (Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle, plastering and finishing the surface to match the exisiting surface after fixing of window.)

S & F powder coated anodised Aluminium door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock,hydraulic door closer with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified and directed.

S&F in repair for 18/19mm thick Prelaminated interior grade Block boards, grade 2 quality, decorative type with decorative face veneer on one face solid core, general purposes type fixed with screws to timber frame work complete all as specified and directed.

S & F 30 mm flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed.

S & F 25 mm dia fancy type curtain rod with brackets of stainless ends etc fixed in repair complete all as all as specified and directed.

S & F Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as all as specified and directed.

S & F 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F in repairs door closer aluminium (extruded section) body hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

S & F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.

S & F 150 mm size aluminium anodised door handles complete all as all as specified and directed.

M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as all as specified and directed.

M & L cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in, plinth protection providing 75 mm thickness all as specified.

Demolition of stone slabs and tiles of any description or thickness as in floors, apron etc laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for machine cut kota stone as in flooring, stair case landing. treads of steps etc, 18-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified including 15mm thick screed bed or bedding in cement mortar 1:6. all as specified and directed

M&L for 18-25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified.

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling complete all as specified.

M & L Vitrified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.

M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile 400x400 mm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.

All as per item no 39.00 but in vertical surfaces such as skirting over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi-corrugated etc.) sheets in roof covering complete all as specified.

S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , including Ridge fixed with self tapping screws complete all as specified.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling timber scantlings 40sq. cm and over in section, in any position as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified.

M & L Rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connectiong plates complete including cutting, grinding, welding etc Fe-290 (Gde E-165) as required complete all as specified.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to FE 410-W (Gde-E-250, Quality-A) complete all as specified.

M & L for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of redoxide complete all as specified.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

S & F 4mm thick coloured textured designer ceiling board (Everest) of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc complete all as specified.

Dismantling water tanks and removing to store exceeding 250 ltrs and n exc 500 ltrs complete all as specified .

S &F 500 ltrs Rotational moulded polye?thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl connecting pipes securing access covers etc complete all as specified.

S & F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete all as specified.

Taking up or down steel tubing 15 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from site complete all as all as specified and directed.

S &F Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of bore dia 15 mm complete all as specified and directed.

Taking up or down steel tubing 20 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from site complete all as all as specified and directed.

S &F Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of bore dia 20 mm complete all as specified and directed.

S & F in repairs 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets fixed in repairs complete all as specified and directed.

S & F in repairs Bib taps (long body) fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as directed.

S & F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed.

S & F in repair pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including complete all as all as specified and directed.

S & F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.

S & F in repairs health faucet spray type brass, chromium plated, and 1.5 m long PVC flexible pipe complete all as specified and directed.

S & F in repairs PTMT Swivel Shower rose, 15 mm dia ( Minimum wt 40 gms), complete all as all as specified and directed.

S & F in repair 15 mm stainless steel bore angle cock with flage chromium plated complete all as specified and directed.

Taking down copper/aluminium point wiring ( light, fan, socket or power) complete,incl fixtures and fittings like swithes, ceiling rose, pendant, regulator, sockets, light fitting ( Mirror light,Bulk head,LED Panel 2''x2'',security light,wall fitting,down light,Flood light,post top lantern) etc. removing materials for taking credit and making good disturbed surfaces of walls, floors, etc with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for the following points:-

One light /Fan /exhaust point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

M&L for Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete all as specified and directed.

S&F modular switch one way 6 amp 1 module all as specified and directed

S&F modular switch one way 16 amp 1 module all as specified and directed

S&F modular socket 6/16 - 2/3 pin combined 2 module all as specified and directed

S&F modular socket 6 amp 3 pin combined 2 module all as specified and directed

S&F modular bell push, 6 amp, 1 module complete all as specified and directed

S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed.

S&F socket type modular hum free electronic step fan regulator suitable for BLDC fan all as specified and directed

Supply and fix in replacement of old unserviceable LED tube light fitting Integral slim LED batten 20 watts with polycarbonate diffuser internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified.

Supply and fix in replacement of old unserviceable LED mirror light light fitting Integral slim LED batten Integral 9 / 10 watts of 2 feet long internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified.

Supply and fix in replacement of LED Bldg/security light fitting 30 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified.

Supply and fix in replacement of recessed mounted LED panel light 2'x2' size, 36 watts, full white / warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP / Amstrong / grid false ceiling complete with all fixing accessories including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:-

2x4 sqmm + 1x4 sqmm earth continuity conductor in 20 mm dia conduit..

2x6 sqmm + 1x6 sqmm earth continuity conductor in 20 mm dia conduit..

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed with degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete all as specified and directed.

Supply & Fixing for sheet metal enclosure MCB distribution board, double door with IP43 -IK09protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification

Supply and fix in replacement of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately.

S&F MCCB 125A 4 Pole, 16 KA, suitable for MCB DB complete all as specified and directed.

S&F MCBs of 'B' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:- Note for MCBs & MCB DBs:- MCBs & MCB DBs shall be of the same make.

SP 6 to 32 amp.

SPN 6 to 32 amp.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete all as specified and directed.

Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete all as specified and directed.

Taking down Ceiling Fan , Exhaust fan, sealing cable end,dismantling blades and removing fan and blades to store complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

SANVI ASSOCIATES (BID ID -3475092)

RISING ELECTRICALS (BID ID -3475342)

DATTA SURYAKANT CHAUDHARI (BID ID -3474931)

DMA PROJECTS (BID ID -3475119)

SNEH TRADERS (BID ID -3476221)

GIRNAR CONSTRUCTION (BID ID -3474507)