ITI/STRIVE/Electronics/1671

Welding Trade Tool and Equipments

Connecting Screwdriver 10 X 100 mm

De- soldering pump electrical heated, manual operators 230 V, 40 Watt

Precision set of screw drivers T5, T6, T7

Tweezers – Bend tip 100 mm

Steel measuring tape 3 meter

Tools makers vice 100mm (clamp)

Tools maker vice 50mm (clamp)

Crimping tool (pliers) 7 in 1

Magneto spanner set 8 Spanners

File flat bastard 200 mm with insulated handle

File flat second cut with insulated handle 200 mm

File flat smooth with insulated handle 200 mm

Plier - Flat Nose 150 mm

Round Nose pliers 100 mm

Scriber straight 150 mm

Hammer ball pen with handle 500 grams

Tubular box spanner Set - 6 - 32 mm

Magnifying lenses 75 mm

Continuity tester With LED and Buzzer indicator

Chisel - Cold - Flat 10 mm X 150 mm

Scissors 200mm

Handsaw 450mm

Hand Drill Machine Electric with Hammer Action ( 1 mm to 13mm bit set)

First aid kit First Aid Manual, Bandage, Elastic Bandage, Adhesive Tape, Safety pins Scissors, different size Sterile gauze pads, cotton roll, Antiseptic wipes, Antibiotic Ointment, Dettol Liquid Gloves etc.

Bench Vice Bench Vice - 125 mm Bench Vice - 100 m Bench Vice - 50 mm

Dual DC regulated power supply 30-0-30 V, 2 Amps

DC Regulated Variable Programmable DC Power Supply 0-30V/3A

CRO Dual Trace 20 MHz (component testing facilities)

Signal Generator with Digital Display for Frequency Amplitude 10 Hz to 100 Khz, 50/600 Ohms (output impedance)

Battery Charger 0 - 6 - 9 - 12 - 24 - 48 V, 30 Amp

Clamp meter 0 - 10 A

Function generator ( DDS Technology (Sine, Square, Triangle, Ramp, Pulse,Serial Data, TTL and Modulation.) 1 MHz -10 MHz FunctionPulse – Modulation Generator with Built in 40MHz Frequency Counter

Dimmer starter 3 Amps, 0-250 V

Autotransformer 15 Amps, 0-270 V

Analog Component Trainer Breadboard for Circuit design with necessary DC /AC power supply: Sine, Square, Triangle Modulating Signal Generator and Simulation Software

Milli Ammeter (AC) 0 – 200 mA MI Type

Digital IC Trainer Breadboard for Circuit design with necessary DC Power Supply, Graphical LCD, Clock Frequency 4 different steps, Data Switches: 8 Nos, LED Display: 8 Nos. (TTL), Seven Segment Display, Teaching Simulation Software

Digital and Analog Bread Board Trainer DC/AC Power Supply, Sine/ Square/ TTL Generator Data Switches, LED indication, LED Display: 8 in Nos Simulation/Teaching Content through software

POWER ELECTRONICS TRAINER with at least 6 no’s of application board MOSFET Characteristics SCR Characteristics SCR Lamp Flasher SCR Alarm Circuit Series Inverter Single Phase PWM Inverter

Electronic circuit simulation software with 6 user licenses with 6 user licenses Circuit Design and Simulation Software with PCB Design with Gerber and G Code Generation, 3D View of PCB, Breadboard View, Fault Creation and Simulation

DSO (colour) 4 Channel , 50MHz Real Time Sampling 1G Samples/Sec, 12 Mpts Memory with PC Interface USB, LAN and math function includes +, -, FFT, differential, integral, abs, log etc

Soldering & De soldering Station Hot Air Specs:Temp. Range 50 deg C – 450 deg C Wattage 25 to 80 Watt Digital Display Hot air blower 500 W (De –soldering Gun type)

SMD Soldering & De soldering Station with necessary accessories Temp. Range 100deg C – 450 deg C Digital Display Hot air blower 500 W (De –soldering Gun type) Wattage 10 to 60 Watt.

DOL starter Single Phase NVC 0-220 V 5 Amp

AC Motor Trainer Kit ¼ HP motor Single Phase Contactors Relays MCB DOL Starter

Frequency modulator and Demodulator trainer kit FM Modulator Type: Reactance Modulator, Varactor Modulator, VCO Based Modulator FM Demodulator type All 5 demodulation techniques Detailed teaching and learning contents through software.

PWM trainer kit Message Signal Frequency 500 HZ, Amplitude 0 – 5 Volt. Supply Voltage board + 12 V, + 5 V Supply current minimum 100 m Amp.

AM/FM Commercial radio receivers 3 - Band

Microcontroller kits (8051) along with programming software (Assembly level Programming) Microcontroller kits (8051) along with programming software (Assembly level Programming) Core 8051, ready to run programmer for AT89C51/52 & 55, programming modes Key Pad and PC circuits. Detailed learning content through simulation Software.

Application kits for Microcontrollers 6 different applications 1. Input Interface : 4x4 Matrix Keypad, ASCII Key PAD, Four Input Switch 2. Display Module 16X2 LCD, Seven Segment, LED Bar Graph 3. ADC/DAC Module with most popular DC/DAC0808 4. PC Interface: RS232 & USB 5. Motor Drive: DC, Servo, Stepper 6. DAQ: Data Acquisition to sense different sensors signals

Sensor Trainer Kit waveforms, In built DAQ, and standard processing circuits like Inverting , Non – Inverting , Power, Current , Instrumentation Differential Amplifier, F/V,V/F,V/I,I/V Converter, Sensors :RTD,NTC Thermistor,LM35 Thermocouple, Gas(Smoke) Sensor, Load cell, LVDT Sensor, Speed Sensor

Fiber optic communication trainer Full duplex analog & digital trans- receiver with 660nm & 950 nm, noise generator with variable gain , four seven segment display BER counter, eye pattern.

LCD based DPM 3.5 Digit of different current & voltage ratings

SMPS different make

UPS Trainer PWM Switching technology, test points to measures the voltage of different sections overall functioning of UPS Trainer, AVR transformer, UPS with load condition.

UPS 3 KVA with backup time minimum 30 minutes

Mobile phone Trainer 3G/4G /55555G Dual SIM GSM Handset. Frequency measurement and band verification. Real time Mobile Operation

Smart phones of different make (android/Windows) 8 GB RAM, 64 GB Storage

Cell phone power source with charger chords for different cell phones

LCD TV (Trainer kit ) 21-inch full HD LCD Color Television should support PAL/ NTSC video formats Complete block diagram of a LCD TV system, Study board indicating various sections of LCD TV along with the test points and switch faults

LED TV (Trainer kit ) 20-inch full HD LED Color Television, PAL/ NTSC video formats, complete block diagram of a LED TV system , Study board indicating various sections of LED TV along with the test points and switch faults Trouble shooting in different sections

Home theatre system Speaker Details No. of channels 5:1 60 watt with all accessories

Solar Training Kit/ Simulator With built in meters for DCV, DCA, AC multifunction Meter (for ACI, ACV, Power, Frequency), Protection Circuits, BS-10 terminals for making the connection, Single/ Dual axis tracking system Charge Controller : PWM based MPPT, Charging Stage : Bulk, Absorptions and Float.

LED lighting system Measurement of Power, Voltage, Current, Power Factor and Light output performance of different lighting products like LED, CFL at variable input voltages 0 to 245V variable AC

Metal Rack 100cm x 150cm x 45cm (18 Gauge)

2.5 m x 1.20 m x 0.5 m (18 Gauge)

Fire Buckets 9 litter Metal Thickness (18-20 SWG ) with stand

Technozon Solutions

aa kay traders

Star Technology

Om Parkash and co

Vee Kay Systems

MULTITECH SYSTEMS

Star Technology

Vee Kay Systems

aa kay traders

Technozon Solutions