SPECIAL REPAIRS TO SEWAGE SYSTEM CONNECTING WORKS IN OFFRS MD ACCN AT NEW OLD ALLENBY LINE PROVN OF PPGI SUN SHED AT BLDG NO 334 TO 343 AT KOWKOOR LINE JCOs OR MAP QTRS AND BLDG NOS P 705 P 706 P 707 AT AMMUGUDA JCOs MAP QTRS AND PROVN OF TOILET BLOC

Amount

Surface dressing not exceeding 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundations, manholes, laying cables, pipe lines, etc and getting out in hard/dense soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed

Excavation in post holes (or similar holes) each n. exc 0.5 Cum, in hard / dense soil getting out, returning filling in and well ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed.

M&L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.

M&L PCC (1:2:4), type B-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.

M & L PCC (1:2:4) type B0 using (using 12.50mm graded stone aggregate) as in coping, water troughs, channels inside manholes and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

M & L PCC (1:2:4) type B1 using (using 20 mm graded stone aggregate) as in coping, kerbs, water troughs, channels inside manholes and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

M&L PCC ( 1:2:4) type B1 (using 20 mm graded stone aggregate) in benching, surface channels for manholes or drains etc, with necessary formwork complete all as specified and directed.

M&L Pre cast RCC ( 1:2:4) type B1 (using 20 mm graded stone aggregate) as in cover slabs for manholes, and set in CM (1:4) including necessary formwork including demolition of existing man holes of any description complete all as specified and directed.

M & L Precast cement concrete block masonry with solid blocks exceeding 10cm in width by using precast cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) and set in CM (1:6) complete all as specified and directed.

M&L Pre cast Machine pressed cement concrete (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in kerbs stones and fixing all as per manufacturer instructions etc., complete all as specified and as directed. Note: The size shall be provided as per directions of Eng-in-charge.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred, stopped ends etc complete all as specified and directed.

M&L Providing RCC M-20 (Nominal Mix) (1:1.5:3) type A1 (using 20mm nominal size graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc; basement slabs, complete all as specified and directed.

M&L Providing RCC M-20 (Nominal Mix) (1:1.5:3) type A1 (using 20mm nominal size graded crushed stone aggregate) as in columns, pillars, piers, posts and struts etc. complete all as specified and directed.

M&L Providing RCC M-20 (Nominal Mix) (1:1.5:3) type A1 (using 20 mm graded stone aggregate) as in beams, cantilevers bressummers lintels over 1.5 m span, etc complete all as specified and directed.

M&L Providing RCC M-20 (Nominal Mix) (1:1.5:3) type A1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floor roof, landing , slabs of septic tank, soakage wells, etc complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundation, footings, base of columns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels. Cantilevers, shelves including supports, overhangs, etc also splays between floor and beam etc for rough finished flat surfaces of concrete complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, landings and similar work not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed.

Demolition of brick work built in cement mortar, including all quoins, arches, pillar etc., including removal of debris beyond the premises complete all as specified and directed.

M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.

M&L Brick work with flyash bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed.

M&L Walling of random rubble masonry un coursed, well bonded, bedded and solidly hearted, built in CM (1:6) Secunderabad and Bangalore type complete all as specified and as directed.

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube supplying & fixing in openings as per specification & drawings complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per drawings and specifications complete all as specified and directed.

S & F 100mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B1 complete all as specified and directed.

S&F 150 mm long aluminum anodized barred tower bolts, of extruded section with bright bolt complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles fabricated type, anodised, complete all as specified and directed.

S&F Ventilator made with 5mm PVC sheet a overall outer dimensions of size 600 x 600. The rails and styles shall be 40x57mm duly reinforced with 19x19mm steel tube. The ventilator is divided into two equal parts panels with mullion of 62x57 mm. The bottom portion of the ventilator is fitted with 3.5mm pin head glass and top portion is divided with louver arrangement for placing the glasses including 12mm dia 2 Nos of bars in each panels complete all as specified.

M&L TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

All as per Item No. 35 above, but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, complete all as specified and directed

S&F Structural steel work rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E-165) complete all as specified and directed.

S&F Structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5 cm long and dia of neck 5 to 10 mm complete all as specified and as directed.

M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS:15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 Mpa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures, etc complete all as specified and as directed

Cutting and grooving of wall for fixing of galvalume sheet and making good the existing surface after fixing of galvalume sheet complete all as directed by Eng-in-charge.

M&L Providing water proofing treatment with APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric ( wt not less than 150gm/Sqm) applied on primed surface ( priming coat as per the directions of Manufacturer) by forced (torch) application with 10cm overlaps and finally coating the surface with bituminous aluminum paint @ 100gm/Sqm complete all as specified and directed by Eng-in-charge.

Demolition of cement concrete (unreinforced) in floor of paving not exceeding 15 cm thick below or above ground level including removing debris beyond the premises complete all as specified and as directed.

M&L Hard core of gauge n exc 63m, deposited spread and levelled in layers n.exc 15cm thick, watered and rolled/ rammed to a true surface complete all as specified and as directed.

M&L for 100 mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in subbase to floor complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.

M&L 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as specified and as directed.

M&L Designer rubber moulded chequerred cement concrete tiles of size 300 x 300 x 22mm or 250 x 250 x 22mm thick with mixture of grey and white cement in equal proportions with pigments and set and pointed in neat cement slurry in floors over and including 20 mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes etc complete all as specified and as directed.

Dismantling wall floor or hearth tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed.

S&F Non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm in floors etc., set and jointed in neat cement slurry and painted in white cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

S&F Glazed coloured earthen ware tiles of size 200x300x6 mm thick as in in vertical surfaces such as skirting or dado and set, jointed in neat cement slurry and pointed in white or colour cement to match over and including 15 mm thick rendering in CM (1:4) as backing coat complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness and similar work laid, bedded and pointed in cement mortar complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver blocks 60 mm thick by using M-35 grade with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 etc complete all as specified and as directed

M&L Sand filling or grit cushioning in below inter locking tiles, etc including spreading, levelling, watering and consolidation, complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for keys scrubbing down with water etc., complete all as specified and directed.

M&L Rendering 15mm thick CM (1:6) on brick masonry or concrete surface, including finished the surface smooth and even without using extra cement complete all as specified and directed.

M&L Rendering 10mm thick CM (1:4) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering two coats, first coat 10mm thick in CM (1:6) and 2nd coat 5mm thick in CM (1:4) with water proofing compound on external wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified. (Note : Supply only approved water proofing compound shall be measured and paid separately under relevant item)

Supply only integral water proofing compound complete all as specified and directed.

M &L Preparation of new surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L Preparation of new surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L Preparation of new surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M&L Preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L Cutting existing steel tubing for alterations or additions (Each cut measured) including making necessary threading and connection to the existing line to new line of 40 mm dia bore complete all as specified and directed.

S&F GI pipe 15mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down old unserviceable pipe complete all as specified and directed.

S&F GI pipe 20mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down old unserviceable pipe complete all as specified and directed.

S&F GI pipe 40mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down old unserviceable pipe complete all as specified and directed.

S&F Vitreous china wash down water closet, "Pedestal pattern including P or S trap with fixing bolt, plastic water closet seat cover, white, closed pattern with flat bottom and cover with aluminised hinging device, complete all as specified and directed.

S&F PVC Low level flushing cistern 10 litres capacity including all fittings i.e. float valve, syphon, flush pipe, brackets all as specified and directed

S & F 15mm fancy Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed..

S & F 15mm fancy Stop valves, cast copper alloy, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Stop valve 20mm bore, cast copper alloy, screwed down, high pressure, with or without crutch or butterfly handles, screwed both ends for iron pipes or unions and fixed complete all as specified and directed.

S & F 15mm fancy pillar taps, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

M&L PVC connection 15mm bore size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F Salt glazed stoneware gully traps, square or round mounted type ' P' of size 150x150mm complete all as specified and as directed.

S&F Salt glazed stoneware gully traps, square or round mounted type ' P' of size 150x150mm as fixed in repairs complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union, out let pipe etc for discharge complete all as specified and as directed.

S&F Vitreous china urinal partition white of size 310 x 700 mm. complete all as specified and as directed.

S&F Vitreous China wash basin, white, flat back, size 550x400mm excluding ditto but including brackets complete all as specified and as directed.

S&F PTMT waste coupling 32mm bore half or full threaded ( minimum weight 32mm- 45 gms) complete all as specified and as directed.

S&F PVC waste pipe 32mm bore for WHB/ Urinal complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks of 1000 ltr capacity,(cylindrical vertical with closed top) triple layered, hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.

M&L 25 mm bore ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe and fixed.(Minimum weight 210gms) as fixed in repairs complete all as specified and directed.

S & F 110mm bore UPVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking out old pipes complete all as specified and as directed.

S & F 110mm bore UPVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F 110mm bore UPVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F 75 mm bore UPVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking out old pipes complete all as specified and as directed.

S & F 75 mm bore UPVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F 110mm bore UPVC (SWR) plain bends, any radius as fixed in repairs complete all as specified and as directed.

S & F 75 mm bore UPVC (SWR) plain bends, any radius as fixed in repairs complete all as specified and as directed.

S & F 110 mm bore UPVC (SWR) plain bends, any radius with oval access door as fixed in repairs complete all as specified and as directed.

S & F 75 mm bore UPVC (SWR) plain bends, any radius with oval access door as fixed in repairs complete all as specified and as directed.

S & F 75 mm bore UPVC (SWR) plain bends, any radius with oval access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single T equal or un equal with access door complete all as specified and as directed

S&F 110 mm bore PVC (SWR) branch piece (single Y or T) equal or un-equal with access door as fixed in repairs complete all as specified and as directed

S&F 75 mm bore PVC (SWR) branch piece (single Y or T) equal or un-equal with access door as fixed in repairs complete all as specified and as directed

S&F 100 mm bore PVC (SWR) floor trap/Nahni trap, plain with grating including jointing to waste pipe fixed in plain cement concrete 1:2:4 type B1 as fixed in repairs complete all as specified and as directed

S&F PVC (SWR) Vent cowl of 110mm bore as fixed in repairs complete all as specified and as directed.

S&F PVC (SWR) Vent cowl of 75mm bore complete all as specified and as directed.

S&F PVC (SWR) Vent cowl of 110mm bore as fixed in repairs complete all as specified and as directed.

M&L 100 mm internal dia salt glazed stoneware drain pipes, grade ‘A’ laid in trenches with cement joints including demolition and breaking up drain pipes set in cement mortar complete all as specified and as directed.

All as per Item No.102 above, but 150 mm internal dia

All as per Item No.102 above, but 200 mm internal dia

M&L for RCC pipes, class NP3 150 mm bore laid in trenches with one collar per length and jointed with cement joints including demolition and breaking up existing drain pipes set in cement mortar complete all as specified and as directed.

All as per Item No.105 above, but 200 mm bore

M&L for RCC pipes, class NP3 150 mm bore laid in trenches with one collar per length and jointed with cement joints complete all as specified and as directed.

M&L Concrete bed to drain pipes of bore 100 mm dia of pipes with PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and directed.

All as per Item No.108 above, but 150 mm dia

All as per Item No.108 above, but 200 mm dia

M&L Concrete bed to drain pipes of bore 150 mm dia of pipes with PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and directed.

M&L Cutting into existing manholes or connecting new drain of size 100 mm dia pipe including making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) by using PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) with smooth finish and reforming benching as required, complete all as specified and directed by Engineer-in-Change.

All as per Item No.112 above, but 150 mm dia of pipe

All as per Item No.112 above, but 200 mm dia of pipe

M&L on site LLDPE RCC septic tank 30 users capacity of conventional type designed to carry sewage and sludge water, excavation in any type of soil, PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) below foundation, vent shaft, connection etc, complete for complete all as specified and as directed by Eng-in-charge. Make : Sintex/Polycon/Plasto as approved by GE

M&L Soakage well of size 1.8m dia and 4.5mtr effective depth including excavation, in any type of soil, foundation with PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) and walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats complete all as specified and as directed by Eng-in-charge.

Provision of soak well of size 1.8m dia x 3.0m deep including excavation in ordinary soil, foundation with PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) and walls of honeycombed masonry and solid in M-25 concrete, including intercepting chamber, screen chamber, brick work in CM, RCC cover slab in M-25/RR masonry/ filling with brick bats complete as per drg No TD/ST/748, sheet No 1/1 dt 22 Jan 2011 complete all as specified and as directed by Eng-in-charge.

M & L for Point wiring with 1.5 Sqmm copper conductor single core PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC conduit surface / concealed and conduit accessories of suitable dia medium grade and pressed steel terminal boxes suitable for MODULAR switches size duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with suitable modular white cover plate for fixing switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for: (a) One light point/Bell point controlled by one, one way switch 5 amps, SP

All as per Serial item No. 118 above, but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

All as per Serial item No. 118 above, but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Serial item No. 118 here in before, but using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor

S & F Switch piano, single pole one way flush type 5 amps 230 volts complete all as specified and as directed

S & F Switch socket combination 2 in 1, multipurpose 6 pin of 15 amps flush type complete all as specified and as directed

S & F Lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks completed all as specified and as directed

S & F Ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified.

S & F Wall mounted Indus plus LED Batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1x20 w watts, 230 volts, bipin holders, DIFFUSED TYPE connector block, internally pre wired etc with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting all as directed by Engineer-in-charge.

S&F LED security Light luminaire of 1x 35 watts with deep drawn housing including all accessories and LED Lamp with 25 watts with suitable pipe bracket 40 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts all as specified and as directed.

S & F Sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic lock system fox fixing MCB's/Isolators complete all as specified and as directed.

S & F MCB SPN 40 Amps 240 volts 'C' curve suitable for fixing in MCB DB's complete all as specified and as directed.

S & F MCB SP 6 to 32 Amps 240 volts 'C' curve suitable for fixing in MCB DB's complete all as specified and as directed.

M&L Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore 20mm dia light grade galvanised iron pipe with funnel wire with mesh for watering and connecting to main switch board/controlled board as shown in electrical plate No.3 in SSR Pt-I connected to earthing test points and including testing on completion etc., complete all as specified and as directed. Note : The unit rate shall also include for excavation earth work in hard /dense soil, PCC chamber made of PCC (1:3:6) type C1 (using 20mm graded stone aggregate) in pit, 50mm thick RCC (1:2:4) type B1 (using 20mm graded stone aggregate) cover duly reinforced with 8mm dia TMT bars @ 100mm centre to centre both ways, CI cover with CI frame hinges, galvanised iron funnel with watering pipe, wire mesh, complete.

Supply laying or fixing or passing through pipe, 1100 Volts grade heavy duty cable with PVC insulated aluminium stranded served with inner sheeting of PVC tape and overall PVC insulated in service connection suspended by insulating hangers not more than 01mtr apart including 4mm suspension wire of size 16 Sqmm two single core cable complete as specified and as directed by Engineer-in-Charge.

S&F Exhaust fan of size 300 mm sweep, 1380 RPM, single Phase 50 Hz, Heavy Duty, air delivery-1750 Cum/HR, power 70 watt 230 volts AC with louver including making hole in wall and fixing arrangement with nuts bolts etc., and making good the disturbed surface all as specified and as directed.

RAM CHARAN CONSTRUCTIONS

M/s GM Constructions

M/S RADHIKA ENTERPRISES