Construction of Fire Brigade Station with Office Buildings at Ambala Sadar

Amount

Providing and fixing Readymade information signs for service areas in stainless steel finish (Grade 304 , 1.5-2mm thk.) with information embossed or cut out with appropriate lettering/Pictograms/ complete as per the attached reference images. Lettering font,size and content subject to final approval of the architect in charge.SERVICE AREAS-SIZE OF PLATE 6"X6" with rounded edges

FUNCTIONAL AREAS -SIZE OF PLATE 12"x3"

Providing and fixing Room plates on glass/wooden partitions / glass doors as per the approved location. Size of the SS plate(Grade 304 , 1.5-2mm thk.)- 6" x 6" with acrylic black rimming sliding room occupany indicator , lettering to be embossed/etched complete as per the attached image.Font and final design subject to final approval of the architect in charge.

Providing and fixing Directional signage on toughened glass sheet .Content to be displayed using plotter cut lettering on one side of the sheet, with additional taping to achieve a unifrom background . Lettering font,size ,color and content subject to final approval of the architect in charge. Cost to include mounting of glass sheets using SS Studs on masonary wall surface or suspending the sheets using ss rods from the ceiling.

Providing and installing Fire exit sign ceiling hanged, led Emergency with Ni-cd Battery backup capable of emergency backup of 2hr. Complete with hanging accessoires to the satisfaction of Engineer-in-charge.

Providing and installing Color Coded Dustbin DUO made of FRP Size: 406B x H813 xL813mm With Plastic bucket of 60L Each Colors & Graphics to be customized as per the directions of the architect

Providing and installing SS Dustbins with Swing Lid Size: Dia 230mm x Height 460mm Material : SS-202 grade

SITC of Manual call point with mounting box complete as required.

Sitc of Electronic hooter 6 watt output TAC approved with a range of 25-30 mtr.

providing, installing, connecting, testing and networkable logic driven analogue addressable Main Fire Alarm Control and indicating panel.The panel shall be coupled to the PA system complete in all respect. 4 loop Panel

Wiring with 2X1.5 sqmm solid PVC insulated copper conductor 100 volt grade wires in with concealed conduit including terminations, all labour and material etc complete

Supply/Fixing of self illuminated "EXIT" sings made out from not less than 4 mm of transparent acrylic sheet of 300 x 150 mm size with self illuminated plastic words of 100 mm height suspended from ceiling by means of M.S. chain or fixed of the walls as required and as directed at site.

Supply, installation, testing and commissioning of Analogue addressable Photo Smoke Detectors based with LED shall be visible from 360deg, complete as required. (Make :/ GST/Morley)

Supply, Installation, Testing and Commissioning of Fault Isolator (GST/Morley)

Supply, Installation, Testing and Commissioning of Monitor Module. (GST/Morley)

Supply, Installation, Testing and Commissioning of Control Module. (GST/Morley)

Supply and fixing Response Indicator with Dual LED

Supply & fixing of fire extinguisher, ABC Type 6.00 kg. capacity(ISI Marked IS:15683 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.PWD-2018-1131 (A)

Supply & fixing of CO2 type fire extinguisher, 6.5 kg. capacity(ISI Marked IS:2878 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.PWD-2018-1132 (A)

Supply, Installation, Testing and Commissioning of M.S. Pipe 'B' Class as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends. Tees, Reducers etc. and coating of Primer and P.O. Red Paint. Make : QST/Jindal Gzb. 150mm ...

Supply, Installation, Testing & Commissioning of Butterfly Valve Complelte in all respects.(Make : SIR/Kartar) 150 mm

Supply, Installation, Testing & Commissioning of Flow Switch, complete in all respects. (Make:- System Sensor)150 mm dia

Supply, Installation, Testing & Commissioning of Alarm Control Valve, complete in all respects. (Make:- System Sensor)150 mm dia

SITC of Sprinkler 68° deg, complete in all respects. (Make:- OMEX/ Life Guard/Safex) Pendent/Upright Type

Wall Mounted Type

Supply, Installation, testing and Commissioning of Normal type Rosette Plate for sprinkler

Supply and Laying of Armoured Cable 2x1.5 Sqmm. (Make:- Relison/ Paradise/ Polycab/Pirelli)

Supply and installation of Air vessel of 300 mm dia, 1000 mm height, 6 mm thick dished end 8 mm thick.

Supply and installation of Announcing Panel

SITC of Air release valve.

Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m. including getting out the excavated soil & then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. & disposing of surplus excavated soil as directed within a lead of 50m. a) Pipes 80mm to 300mm diameter. DSR-16(2.10.1.2)

Constructing masonry Chamber 60x60x75cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement : 5 fine sand) for fire hydrants, with C.I. surface box 350x350mm top and 165mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand ) 12mm thick finished with a floating coat of neat cement complete as per standard design. DSR-16(18.36.1)

Supply, Installation, Testing and Commissioning of one coat of 4 mm thick 'PYPKOTE' or coatek tape anti rust pipe protection , primer and lap of 25 mm on external M.S. pipes to make an impermeable layer in trenches or on structural/masonry members complete including surface preparation.150 mm dia

Supply, Installation, Testing and Commissioning of M.S. Pipe 'C Class Heavy as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends. Tees, Reducers etc, complete in all respect. MAKE : Jindal(Hissar)/ Bharat/Indian Tube/ Prakash)-(Under ground) 150 mm

SITC of Sluice Valve complete with all respect.MAKE : Jindal(Hissar)/ Bharat/Indian Tube/ Prakash)-(Under ground)150 mm dia

Supply, Installation, Testing & Commissioning of NRV complete with flanges, gasket and nut bolts.MAKE : Jindal(Hissar)/ Bharat/Indian Tube/ Prakash)-(Under ground) 150 mm dia

SITC of Singal Headed Hydrant Landing Valve comprising of 80 mm dia flanged Bend 63 mm dia, with cap and chain conforming to IS:5290(Make : Newage/Minimax/Safex/Firex)

SITC of RRL Hose Pipe 63 mm dia × 15 Mtr. Long with GM Coupling conforming to IS : 636(Make - Newage/Jayshree/CRC)

SITC of Short Branch Pipe as per IS:903(Make : Newage/Safex/Firex)

Supply, Installation, Testing & Commissioning of Butterfly Valve complete with flanges, gasket, nut bolts 80 MM

SITC of Hose Cabinet Box of 18 SWG M.S.Sheet with glass to accommodate Hose Reel Drum with Ruber Pipe with Nozzle. 2 Nos. RRL Hose and 1 No. Branch Pipe with Nozzle

Supply, Installation, Testing & Commissioning of Fire brigade inlet with 63 MM dia instantaneous inlet complete with all necessary fittings and MS enclosure with glass door made of 18/16 SWG sheet.(4 WAY)

Supply and Installation of Electrically Operated TEFC Type induction motor of including suitable Pump 70 Mtr. Head with 2280 LPM, 2900 RPM, 60 HP (Main pump)Complete installation with concrete foundation and suitable base plate by Iron Channel complete works as per required, (Make : Kirloskar/Mather & Platt)

Supply and Installation of Diesel Engine Driven of including suitable Pump 70 Mtr. Head with 2280 LPM. 1800 RPM, 76 BHP. Complete installation with concrete foundation and suitable base plare by Iron Channel complete work as per required (Make: Kirloskar/Mather & Platt)

Supply, Installation, Testing & Commissioning of Jockey pump having capacity 180 lpm @ 70 MWC Head with 10 HP motor complete with base plate, coupling guard, foundation bolts.

Supply, Installation, Testing & Commissioning of Motor Control Center for fire pumps . The motor center will have auto controls for operation of main pump, jockey pump, engine driven pump and battery charger.

Supply, Installation, Testing & Commissioning of Pressure Switch with gauge cock

Supply, Installation, Testing & Commissioning of Pressure Gauge with gauge cock

Supply, Installation, Testing & Commissioning of MS Pipe confirming to IS 1239 B Class upto 150 mm dia and IS 3589 for size 200 mm dia and above with painting, fitting and necessary support.MAKE : Jindal(Hissar)/ Bharat/Indian Tube/ Prakash)200mm

Supply, Installation, Testing & Commissioning of Sluice Valve PN 1.0 complete with flanges, gasket, nut bolts.MAKE : Jindal(Hissar)/ Bharat/Indian Tube/ Prakash)200mm dia

150 mm dia

100 mm dia

80 mm dia

Supply, Installation, Testing & Commissioning of Non Return Valve complete with flanges, gasket and nut bolts.MAKE : Jindal(Hissar)/ Bharat/Indian Tube/ Prakash)150 mm dia

80 mm dia

Supply, Installation, Testing & Commissioning of Anti Vibration Expansion bellow, complete in all respect150 mm dia.

80 mm dia

Supply, Installation, Testing & Commissioning of Butterfly Valve complete with flanges, gasket, nut bolts150 mm dia

100 mm dia

80 mm dia

Supply and installation of Air vessel of 300 mm dia, 1000 mm height, 6 mm thick dished end 8 mm thick.

SITC of Air release valve.

SITC of Draw out connection with foot valve.

Copper Bonded Steel with 23.2 mm dia.Supply, Installation, Testing & Commissioning of long life Maintenance Free Earthing System . The Rod shall be of Copper Bonded Steel with 23.2 mm dia. and 10 feet length with a core of mild steel molecularly bonded with min. 250 microns coating of 99.99% pure electrolytic grade Copper and exothermically welded Cu Busbar of 50X6X200mm tested by CPRI capable of bearing fault current of 50kA. Along with earth enhancement compound (jam plus) tested by RoHs complying IEC 62561-7 in a sealed bag of minimum 30 kg (10 kg Bag x 3) resistivity is less than 0.2 ohm meter. The earth station shall be with Suitable Poly-plastic Pit Cover with lockable arrangement. (for neutral and body 500 kva transformer) including cost of petty material required to complete the job in all respect. Make: JMV or equivalent model of ERICO, OR FURSE, OBO.

Copper Bonded Steel with 14.2 mm dia.Supply, Installation, Testing & Commissioning of long life Maintenance Free Earthing System. The Rod shall be of Copper Bonded Steel with 14.2 mm dia. and 10 feet length with a core of mild steel molecularly bonded with min. 250 microns coating of 99.99% pure electrolytic grade Copper.Along with earth enhancement compound (jam plus) tested by RoHs complying IEC 62561-7 in a sealed bag of minimum 30 kg (10 kg Bag x 3) resistivity is less than 0.2 ohm meter . The earth station shall be with Suitable Poly-plastic Pit Cover with lockable arrangement. MAKE :- JMV, ERICO, OR FURSE, OBO including cost of petty material required to complete the job in all respect. Make: JMV or equivalent model of ERICO, OR FURSE, OBO.

Supply erection testing and commissioning of long life Maintenance Free Earthing System. The Rod shall be of Copper Bonded Steel with 17.2 mm dia. and 10 feet length with a core of mild steel molecularly bonded with min. 250 microns coating of 99.99% pure electrolytic grade Copper and exothermically welded Cu Busbar of 50X6X200mm tested by CPRI capable of bearing fault current of 25 kA. Along with earth enhancement compound tested by RoHs complying IEC 62561-7 in a sealed bag of minimum 30 kg (10 kg Bag x 3) resistivity is less than 0.2 ohm meter . The earth station shall be with Suitable Poly-plastic Pit Cover with lockable arrangement. including cost of petty material required to complete the job in all respect. MAKE :- JMV, OBO BATTERMAN OR ERECO.

Supply erection testing and commissioning of single spike air terminals of 10 mm/16 mm dia.of following lengths as required and as per site conditions. the air terminal shall be manufactured with aluminium. The terminal shall be provided with the integrated / attached threaded base support suitable for mounting the terminals as per site condition. The base support shall be minimum 3 mm thick and shall have inbuilt connector fitting for connection of lightning conductor in such away that conductor contact area shall not be less than 40mm on all side of the conductor. The air terminals shall be supplied with the intermediate guy-wire supports to make it stable in case of high wind speed. including cost of petty material required to complete the job in all respect. Make: JMV, OBO BATTERMAN OR ERECO. 1000 mm

Supply erection testing and commissioning of Roof Conductor for Parapet and Interconnection of Air Terminal: Supply of 8 mm dia aluminium round conductor for air termination network at parapet wall with suitable accessories like type of clamps, conductor holder etc. as required and as per specifications. including cost of petty material required to complete the job in all respect. Make: JMV, OBO BATTERMAN OR ERECO.

Supply erection of T - Connector for making straight joint of 8 mm aluminium Conductor to 8 mm dia aluminium conductor on parapet wall, roof and vertical facade of mesonery / glass / metalic work. including cost of petty material required to complete the job in all respect. Make: JMV, OBO BATTERMAN OR ERECO.

Supply erection OF Cross - Connector for making straight joint of 8 mm aluminium Conductor to 8 mm dia aluminium conductor on parapet wall, roof and vertical facade of mesonery / glass / metalic work. including cost of petty material required to complete the job in all respect. Make:JMV, OBO BATTERMAN OR ERECO.

Supply erection of Straight - Connector for making straight joint of 8 mm aluminium Conductor to 8 mm dia aluminium conductor on parapet wall, roof and vertical facade of mesonery / glass / metalic work. including cost of petty material required to complete the job in all respect. Make: JMV, OBO BATTERMAN OR ERECO.

Supply erection of 8 mm dia aluminium round conductor for Down conductors to be installed on vertical façade of mesonery / glass / metalic work, with suitable accessories like type of clamps, conductor holder etc. as required and as per specifications. including cost of petty material required to complete the job in all respect. Make: JMV, OBO BATTERMAN OR ERECO.

Supply erection of Test Clamp to disconnect the down conductor from the earth termination network for regular checks of the earth termination resistance value. including cost of petty material required to complete the job in all respect. Make: JMV, OBO BATTERMAN OR ERECO.

Supply erection of Expansion piece of made of 8mm aluminium at every 20 mtr to maintain the flexibility to the conductor due to heat. including cost of petty material required to complete the job in all respect. Make: JMV, OBO BATTERMAN OR ERECO.

PVC Insulated wiring in recessed 1.6 mm thick MS conduit pipe with 1.5 sq.mm PVC Insulated copper conductor cable with modular accessories.fan point medium point

Long Point

Light point Short point

Medium Point

Long point

Twin control light point with 2 ways 5 amp single pole switch Short point

Medium Point

Long point

Call bell point i/c MS box of size 180mmx100mmx60mm deep for call bell. Long point

3 pin, 5 amp. Plug point i/c earthing the 3rd pin etc short point.

Medium Point

Long Point

3 pin,15amp plug point with 4 sqmm PVC insulated copper conductor cable i/c earthing the 3rd pin etc. medium point

long point

Supply, Installation, Testing & Commissioning of ACB Microprocessor Based release 800A 4P EDO 50KA with OL,S/C,Earth Fault,Instanious,Neutral & Ground fault Protection LSING + Display Confirm IEC 60947/IS 13947 ( Part 1 & 2), Ics=Icu=Icw, Icw value is for 1 Sec. Flexible & Adjustable Current time protection for Over load, Short Circuit, instataneous s/C & Earth Fault with 5 Trip history & inbuilt LED for Fault indiaction for O/L, / S/C & E/F

ACB Microprocessor Based release 1600A 4P EDO 50KA with OL ,S/C,Earth Fault,Instanious,Neutral & Ground fault Protection LSING + Display Confirm IEC 60947/IS 13947 ( Part 1 & 2), Ics=Icu=Icw, Icw value is for 1 Sec. Flexible & Adjustable Current time protection for Over load, Short Circuit, instataneous s/C & Earth Fault with 5 Trip history & inbuilt LED for Fault indiaction for O/L, / S/C & E/F

S/E of XLPE (E) 11 KV HT aluminum conductor armoured cable ISI mark laid in 1 meter below ground level with sand & bricks with all labour and material including digging and refilling of trench, required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. 11KV(E) 3C x 185sqmm XLPE Insulated Al ConductorArm HT Cable

S/E of XLPE (E) 11 KV HT aluminum conductor armoured cable ISI mark laid in existing pipe /trenches/surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. 11KV(E) 3C x 185sqmm XLPE Insulated Al Conductor Arm HT Cable

Supply, installation, testing and commissioning of powder coated of Siemens grey of approved colour compartmentlised cubicle MV Panel fabricated out of 14/16 SWG thick CRCA sheet steel suitable for operation on 415 Volts, 50Hz, 3 Phase 4 wire AC supply . The panel shalll be indoor free standing, floor mounting, dust and vermin proof type, adeqate size cable alley with front operated rotary handles for MCCB's complete with gland plates, lifting hooks, ventillating louvers, busbars, Inter connections, earthing, labelling electrical interlocking as per specification and drawings, suitable for termination of cables as per single line diagram including. supply and fixing of following switchgear and accessories complete as required. A separate earth copper bus bar of size 25 mm x 3 mm to be provided throughout the length of the panel. complete with both Electrically interlocking foolproof system. The Panel should be extendable type. (Make of panel, Tricolite, Ambit, International Switchgear, Amco, Kalyani switchgear)l). Having CPRI test certificate breaking capacity 70 KA and ISO 9001-2008 CAPACITOR PANEL 400KVAR INCOMER FEEDER MCCB 800A. TP 50KA = 1 NOS Spreader Link = 1 NOS

Design, Manufactaring, Supply, & Commissioning of fully rated electrical grade following given ratings TPN indoor duty aluminum bus duct with PVC heat shriankable sleave insulation, rigidly supported to withstand electro meachnical streeses arising out of short circuit condition totally enclose in dust and vermin proof CRCA sheet steel enclosure with 2 nos. suitable size continuous aluminum earth bars, inspection / ventilation louver set (as specified) LT bus duct / trunking suitable for 3 phase 4 wire, 50 MVA supply system generally confirming to Indian Standard specification, as well as technical specification enclose herewith. Main Bus duct between Transformers, DG Sets and LT switch board with adopter chamber at transformers, DG Sets and switch gear side complete with both side ends and horizontal and vertical bends. Complete with all respect. (Make of BUS DUCT, Tricolite, Ambit, International Switchgear, Amco, Kalyani switchgear)l). Having CPRI test certificate breaking capacity 70 KA and ISO 9001-2008

Design, Engineering, Manufacturing, Testing at Outdoor type package substation with facility for internal lighting, earthing, (Make - ABB,BHEL,Schneider, Siemens, L&T) padlocks etc. with necessary FRTU/RTU for SCADA integration purposes Connection between RMU & transformer shall be using 3 nos. 1C X 95 sq.mm. Aluminium unarmoured (E) XLPE cable and connections from Transformer to LT Panel shall be by Aluminium Busbar. Package substation will have the following equipmentsA HT SWITCHGEAR A.1 Three Way, 11kV, 630Amps 25kA for 1 sec., SF6 insulated Non-Extensible Compact switchgear (Type CCT2) consisting of Two Nos. Fixed Isolator Function & One No. Fixed Vacuum Circuit Breaker in SF6 insulated Stainless current & earth fault relay (IDMTL+Inst.) for protection. RMU-NON-Extensible FBX-C /CCT2 (2 Nos. Isolators - C, 1 No. Vacuum Circuit Breaker - T2) with AL Busbar)-BIL 28/75k RMU-NON-Extensible FBX-C/CCT2 C FUNCTION Consist of 2 Nos. of Load Break Switch.1. Operation of LBS2. Cable Switch Rating- 12KV, 630A, 25KA/1 sec.3. Cable Bushing Rating- 630A ,4. Cable Cover:- As per our standard, 5. Fixed type Capacitive voltage indication 6. ON/OFF/EARTH Switch via MIMIC.7. Bottom Cable Termination- Suitable up to 1 No. X 3C X 300 sq. mm T2 FUNCTION Type:- 3 position Disconnector and Earthing switch equipped with separate drive unit. T2 equipped with over current time release for transformer protection. 1. Vacuum circuit breaker 12 kV, 630 A, 25kA/1 sec. 2. Operation of breaker – 3. Self Powered Electronic numerical protection relay providing over-current & earth fault protection – Schneider make CSPR or C&S make CSDPR relay 4. Tape Wound protection current transformers (Details During Detailed Engineering) 5. Capacitive voltage indication fixed type. 6. ON, OFF, EARTH indication on the front mimic of the panel. 7. Cable box for termination of cable suitable up to 3 Nos. X 1C X 95 Sq. mm 8. Cable cover standard. 9. Emergency trip push button. 10. Shunt trip Coil - 24V DCSchneider 1 RMU accessories:- Operating Handle. 1 Standard Manometer for SF6 gas pressure indication. 1 Right Angled Cable Boots suitable for 1 Run x 3 C x 300 Sq mm 3 Offer reference No/Rev No PSS – TECHNO-COMMERCIAL OFFER Schneider Electric Infrastructure Limited (the demerged Distribution Undertaking of Areva T&D India Limited) Milestone 87, Vadodara-Halol Highway, Village Kotambi, Post Office, Jarod, Vadodara – 391510, Gujarat Tel : 0091 266 866 4466 www.schneider-infra.in Battery 24V DC, 12Ah & Battery Charger - 5A 1 B TRANSFORMER (Manufactured as per IS 1180 with Efficiency Level - II) TYPE:- Ester Oil Type, Hermitically Sealed. (Make - ABB,BHEL,Schneider, Siemens, CROMPTON ) 1. Ratio- 11KV/433V,2. Capacity:- 1000 KVA, 3. Vector Group- DYn11, 5. Winding - Copper, 6. Class of Insulation- A, 7. Ambient Temperature- 50 Deg C, 8. Temperature rise in Oil & Winding over ambient- 40 & 45 Deg C 9. Total Losses @ 50% Loading - 2790 W (MAX) 10. Total Losses @ 100% Loading - 7700 W (MAX) 11. %Impedance – 5 % Schneider make 1 Transformer Accessories Oil Temperature Indicator 1 C LT Busbar - Main Busbar are of Aluminium however Copper Flexible are provided between Transformer & LT Incomer Connection along with main busbar 1 1 Voltage Rating- 433V 2 Current Rating - 2000A D LT PANEL D-1 Incoming 1 1600 A, ACB, 4 Poles, Drawout Manual, 50 KA, Microprocessor based release for O/L, S/C & E/F protection (Make - ABB,BHEL,Schneider, Siemens, L&T) 2 On, OFF, TRIP lamps Schneider = 3 3 R/Y/B indicating lamps Schneider =3 4 CTs 1600/5A, AC. CL. 1, 5 VA Precise/Reco/reputed make =3 5 Digital MFM - EM 6400, AC. CL. 1.0 Schneider= 1 APFC Panel- Incomer 1 no MCCB TP Pole 320A Ics= 50kA Thermal magnetic with Double break roto mechanism. Intelligent APFC Relay with 150 kVAr MPP Heavy duty Capacitor with suitable rating of contactors & Short ckt protection device for each banking. Banking of Capacitor should be 12.5 X4 no, 25 X 2no, 50 X 1no Outdoor Type 2mm thick Galvanised Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP34 degree of protection for Transformer Compartment. The enclosure exterior shall be powder coated with PP based paint. HT & LT compartment will be provided with the door and pad locking arrangement. Transformer Compartment will be provided with Cover.The Compartment illumination lamp with door operated switch shall be provided for HT and LT compartment. Lifting(Bucket) Arrangement shall be provided with

Supply, installation, testing and commissioning of 11kV HT 4 Panel Board (VCB Type) for 11kv Sub Station OEM/OEM Authorized Manufactureres (Make - ABB,BHEL,Schneider, Siemens, L&T)INCOMMER FEEDER: Supply of HT 12KV, 3Phase 50Hz, totally metal clad withdraw able type Vacuum Circuit Breaker panel with Copper bus bar of suitable rating, horizontal isolation type VCB of capacity minimum 630 Amps rated current,Aluminium bus bar as per IEC 62271-100-200.The offered panels shall be tested for IAC level of min. 25kA (ABB/BHEL/Siemens/ Schneider only) for better performance: (i) Mechanical life -30,000 , (ii) Rated Current – 10,000 & (iii) Rated Short Circuit Operations – 100Makes: OEM / OEM Authorised Manufactureres, ABB/ BHEL/Siemens/ Schneider. Panel and VCB parameters are as below :

Supply, installation, testing & commissioning of eco friendly 3 Nos. X 500kVA Silent D.G. Sets suitable for synchronization, Liquid Cooled, Turbo Charged After Cooled diesel engine make KOEL/Cummins/CAT producing a minimum of 608BHP at 1500 rpm, 0.8 power factor, able to deliver optimum output under NTP Conditions with a provision of 10% temporary overload once in 12 hours of running, directly coupled to 500kVA, 415 Volts AC, Three Phase, 50 Hz, 4 wire, 0.8 power factor lagging, brushless type, synchronous alternator, automatic voltage regulator. The engine and alternator should be fitted on common base frame with AVM Pads. The genset should be complete with all accessories like digital engine controller KG-745 or equivalent, remote monitoring system, Electronic Governor, fuel tank of 990 Liters integrated inside the canopy, standard silencer, 24 Volts electric starting system complete with battery and leads, weather proof acoustic enclosure as per CPCB norms and noise level not exceeding 75 db at a distance of 1 meter.

Supply erection testing and commissioning of LED POST TOP 35WATT (+_1 W ) LED EFFICACY 120 LUMENS / WATT including petty materials required to complete the job in all respect. WIPRO Make , Model :-LP07-431-XXX-57-CL, Havells Cat no. RUBYPT35WLED757PSYMTOPC or Equivalent in Philips / Trilux as approved by the Engineer-in-charge. Warranty 2 years from the Date of invoice.

Supply, installation, testing and commisioning of 60 W LED Flood Light luminaire with system lumen output 5100lm and system efficacy of > 85lm/W. LED Flood Light shall be made up of Die Cast aluminum housing with black epoxy polyester powder coating for long life. The luminaire shall be complete IP66 protection for Optical Compartment and Control Gear Compartment. The LED Flood Light shall have power factor more than 0.95 with THD less than 10%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance. including all petty materials required to complete the job in all respect. Reference Wipro Catalogue No.LF19-711-060-57-XX, Havells Cat no. JETACOMPECTOFL60WLED757LTG or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED

Supplying, installation, testing and commissioning of 25 W LED solar street luminaire of housing made of extruded aluminium and IP65 ingress protection. The all in one integrated solar street lighting system having system lumen output upto 4800 lumens. The luminaire should be having SMD type LEDs with secondary lens / optics suitable for streetlighting application, MPPT charge controller and DC driver and automatic dusk to dawn operation feature. The integrated luminaire should have 50Wp monocrystalline PV module, 12.8V/22Ah LifePo4 battery pack having >/= 12 Hrs of autonomy with full power mode and >/= 48 hrs of autonomy with saving mode, dimension (740X305X140) ± 2% mm with aesthetic and compact design. Integreated PIR sensor is used for detecting the movement and increase the intensity of LEDs. to creat safe & effective lighting environment. including all petty materials required to complete the job in all respect. Wipro Cat. No LR14-361-XXX-65-XX or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED

Supply, installation, testing and commisioning of 35 W LED Street Light luminaire with system efficacy of 120lm/W. Light shall be made up of Die Cast aluminum housing . The luminaire shall be complete IP66 protection for Optical Compartment and Control Gear Compartment. Street Light shall have power factor more than 0.95 with THD less than 10%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance. including all petty materials required to complete the job in all respect. Wipro Cat. No LR13-501-XXX-57-XX, Havells Cat no. ENDURACITYLITEPLAT PLUSSL35WLED757SASYBOPC or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED

Supply, installation, testing and commisioning of Led fixture 600mmX600mm 33W+/- 1W Recess mounted with full diffuser with minimum system lumen efficacy of 100lm/W having UGR >19 with APFC constant Current driver for proper driving of LEDs and P.F.>0.95 with THD<10% . including all petty materials required to complete the job in all respect.Wipro Cat. No CRCO10R033HP57UGR or Havells Cat no. VENUSNEOHE2X2R18-42WLED857MODUGR<19 or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED

Supply, installation, testing and commisioning of Led Recess mounted downlighter 9W+/- 1W Square LED downlighter fixture with minimum system efficacy 100 lm/W with die cast aluminium housing for better heat dissapation having HET non-yellowing PMMA diffuser.The LED luminaire shall have power factor more than 0.9 with THD less than 10%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance . including all petty materials required to complete the job in all respect. Wipro Cat. No CRDL11R013HP57,Havells Cat No. INTEGRANEODLR10WLED857S or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED

Supply, installation, testing and commisioning of Led Recess mounted downlighter 18W+/- 1W Square LED downlighter fixture with minimum system efficacy 85lm/W with die cast aluminium housing for better heat dissapation having HET non-yellowing PMMA diffuser.The LED luminaire shall have power factor more than 0.9 with THD less than 10%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance. including all petty materials required to complete the job in all respect. Wipro Cat. No CRDL11R023HP57,Havells Cat No. INTEGRANEODLR18WLED857S or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED

Supply, Installation,comissioning of Recess mounted 26 W+/- 1W round LED downlighter fixture with minimum system efficacy 100 lm/W with die cast aluminium housing for better heat dissapation having HET non-yellowing PMMA diffuser.The LED luminaire shall have power factor more than 0.95 with THD less than 10%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance. including all petty materials required to complete the job in all respect. Wipro Cat. No CRDL11R033HP57, Havells Cat No. INTEGRANEODLR24WLED857S or equivalent make in Philips or Trilux .LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED

Supply, installation, testing and comissioning of Recess Mounted Linear Led Luminaire 20W+/- 1W fixture with minimum system efficacy 100 lm/W with die cast aluminium housing for better heat dissapation having HET non-yellowing PMMA diffuser.The LED luminaire shall have power factor more than 0.9 with THD less than 20%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance. including all petty materials required to complete the job in all respect. Wipro Cat. No LM34-251-XXX-57RMCG1, Havells CAt no. DESTELLO50LR25WLED857SPMMAWH or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED

Supply,installation,testing and comissioning of Recess Mounted Linear Led Luminaire 4X1 feet 31W+/- 1W fixture with minimum system efficacy 96 lm/W with die cast aluminium housing for better heat dissapation having HET non-yellowing PMMA diffuser.The LED luminaire shall have power factor more than 0.95 with THD less than 10%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance. including all petty materials required to complete the job in all respect. Wipro Cat. No CRCO13R038HP57G1, Havells Cat No. VENUSNEOHE4X1PLR28-36WLED857MOD or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED

Supply, testing and commissioning of led fixture 4Ft 20W LED Batten LED Batten with minimum system lumen efficacy of 100lm/W with and P.F.>0.95 with THD<20% having Poly carbonate Diffuser and Aluminium Extrusion housing. including all petty materials required to complete the job in all respect. Cat No :Wipro Cat No. LL20-221-XXX-65AL1, Havells Cat No. LUMILINEPLUSBS20WLED865SPCWH or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED

Supply,installation,testing and comissioning of 2Ft 10W Mirror Light LED Batten Model no Batten with minimum system lumen efficacy of 100lm/W with and P.F.>0.95 with THD<20% having Poly carbonate Diffuser and polycarbonate Housing. including all petty materials required to complete the job in all respect. Cat. No :Wipro Cat No. LL20-111-XXX-60-NE3, Havells Cat No. LUMILINEPLUSBS10WLED865SPCWH or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED

Supply, testing and commissioning of led Strip light for indoor application IP 20 fixture with 5 M/Watt. Wipro Catalogue No.LS06-005-120-WW-50+ LED Driver 25 W (LG40-024), Havells Cat no. FLEXISTRIP5MTRIP2024WLED830S or equivalent make in Philips or Trilux. *LG40-024 driver suitable for one unit suitable for 5 m Spool of LED Strip. *LED Driver LG40-024. including all petty materials required to complete the job in all respect. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED

Supply, installation, testing and commisioning of Hanging Decorative light water drop shaped suspended luminaire led lamp extra 20 W. including all petty materials required to complete the job in all respect. Wipro Cat. No LM87-D320-BLGD or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED

Supply, installation, testing and commisioning of 3 NO. Led Track Light 20W+/- 1W fixture with minimum system efficacy 2000 lm/W with die cast aluminium housing for better heat dissapation.The LED luminaire shall have power factor more than 0.9 with THD less than 20%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance.Wipro Cat. No LD57-251-036-40-XX. Havells Cat no. CYLINDROTSS25W857S38DWHT or equivalent make of Philips or Trilux. including cost of * XTS-5100 Single phase 1 mtr track . * SKB520 2 mtr single suspension . * XTS 52 Straight connector . including all petty materials required to complete the job in all respect. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED

Supplying, installation, testing and commissioning of A.C. CEILING FAN 48" (1200MM) STAR 220 5 Star Rating including cost of petty material required to complete the job in all respect. ( Make : HAVELLS, CROMPTON, anchar panasonic).

Supplying, installation, testing and commissioning of A.C. CEILING FAN 56" (1400MM) BRIZAIR DOUBLE BALL BEARING including cost of petty material required to complete the job in all respect. ( Make : HAVELLS, CROMPTON, anchar panasonic).

Supply, Installation, Testing and Commissioning, of wall fan 300 mm (ISI mark) including cost of petty material required to complete the job in all respect. (Make Crompton, Havells or anchar panasonic)

Supplying, installation, testing and commissioning of HEAVY DUTY EXHAUST FAN 900 RPM 1PHASE 300MM-12'' including cost of petty material required to complete the job in all respect. ( Make : HAVELLS, CROMPTON, anchar panasonic).

Supplying, installation, testing and commissioning of HEAVY DUTY EXHAUST FAN 900 RPM 1PHASE 380MM-15'' including cost of petty material required to complete the job in all respect. ( Make : HAVELLS, CROMPTON, anchar panasonic).

Design, supply, installation, testing and commissioning of 150 KW Of 3 Phase solar grid tie power plant complete withallequipment, as required upto PCU including synchronizationwith grid supply and civil foundation work formodulemountingstructure. The system includes the appropriateno.ofPVModules, mounting structure for themodules. Array Junction boxes, all cabling according to thesite andsystem requirement as follows or as perapproveddrawings.Specifications of the tenderanddirectionsofSite Incharge. The rate includes thefollowing items as per site requirementand as pe+rmanufacturer's specification complete in all respects. The design should be gotapprovedfrom the Architect & Engineer-in-Charge before execution with five years warranty against manufacturing defects.InverterMounting structure (fixed type)Electrical accessoriesEarthing kitAC cables for power evacuationAC distribution board

SUPPLYING , INSTALLATION , TESTING & COMMISIONING OF 13 PASSENGER LIFTS OF FOLLOWING SPECIFICATION HAVING 5 STOP S AND APPROXIMATE TRAVEL DISTANCE OF 24 M HAVING FOLLOWING SPECIFICATIONS Product DescriptionElevator SpecificationsNumber of Persons 15Rated Load 1020 kgNumber of stops 5Number of Access sides 1Floor designations B,S , 1 ,2,3Drive System Alternating Current Voltage Frequency (ACVF)Type of controller Full Collective control - SimplexSpeed of travel 1.5m/sCar Size 1575 mm (W) x 1500 mm (D) x 2239 mm (H)Door Width 900 mmDoor Height 2100 mmRated output motor 7.7 kwCar DesignCar walls finish in Stainless Steel HairlineLED spot in ceilingCar doors finish in Stainless Steel HairlineCar door in Stainless steel finishCar door in Stainless steel finishGranite Flooring finish in Black SeaDeco Ceiling finish in Stainless Steel Mirror 304Full height mirror on rear car panelDoor open/close and alarm buttons

Supply, Installation, Testing and Commissioning of wall / free standing floor mounting dust & vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick bakelite sheet provided all along the bus bar and cable tray separating switches compartment and supporting suitable channel duly painted by 2 coat zinc / red oxide primer followed by 2 coats of powder coating in grey or required shade after rising. the panel having PU / Neoprene rubber gasket of not less than 3 mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipments / switch wear. Transport acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3 mm thick for separately cable alley to BBC from switch chamber extended solid copper bars up to cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The Panel will be complete with control wiring (Copper) and fuse protection. (Only outer area on all sides shall be measured).(Make of panel, Tricolite, International Switchgear, Embit ,Kalyani switchgear). Having CPRI test certificate breaking capacity 70 KA and ISO 9001-2008. tested from the engineer-in-charge / consultant.Note:- The cost of ACBs, MCCBs, MCBs ,are not included in the panel's cost and will be paid under separate head. All acccessories included in the panel cost such as rotary handles, metering etc.MAIN ELECTRIC PANEL - 125.00 SqmIncomer Feeder For 1000KVA Transformers =03Nos. ACB 1600A. FP 50KA EDO TYPE MP ACB 800A. FP 50KA EDO TYPE MP Based = 3 NOSBUS COUPLER ACB 1600A. FP 50KA EDO TYPE MP Based = 2 NOS Multifunction Meter with Communication Port RS485 = 6 NOSRYB Indication Lamp LED =18 NOS1600 &800/5Amp. 15 VA CL-1 Current Transformer = 18 NOS 06Amp. Control SP MCB = 18 NOS CT Short Link = 6 NOS ELECTRICAL INTERLOCKINGBoth DG I/C Electrical & Mechanical InterlockingLTPB = 7 NOSUV Release = 7 NOSPROVISAN FOR MCCB 630A. FP 36KA = 10NOS Spreader Links = 10 NOSRotary Handle = 10 NOSAmmeter with ASS = 10 NOS RYB Indication Lamp LED = 30 NOS630/5Amp. 15 VA CL-1 Current Transformer = 30 NOS06Amp. Control SP MCB = 30 NOSCT Short Link = 10 NOSPROVISAN FOR MCCB 500A. FP 36KA = 5 NOS Rotary Handle = 5 NOSEnergy Meter = 5 NOS400/5Amp. 15 VA CL-1 Current 400/5Amp. 15 VA CL-1 Current PROVISAN FOR MCCB 400A. FP 36KA = 12 NOS Spreader Links = 12 NOSPROVISAN FOR MCCB 300A. FP 36KA =Spreader Links = 1 NOSRotary Handle = 1 NOSEnergy Meter = 1 NOS400/5Amp. 15 VA CL-1 Current Transformer = 3 NOS PROVISAN FOR MCCB 63A. FP 25KA = 1 NOS Spreader Links = 1 NOSRotary Handle = 1 NOS400/5Amp. 15 VA CL-1 Current Transformer = 3 NOS

Provding And Supply of Wipro Wall Light

Provding And Supply Orient Electric Ujala 1200 Mm Energy Saving 3 Blade Ceiling Fan

Bidder Name

Amount

MS B.S.Construction Company(GSTN-NA)

Description of Work / Item(s)

As per BOQ 1 & 2

As per BOQ 1 & 2

As per BOQ 1 & 2

As per BOQ 1 & 2