Notified Area Office panoli

Name SITC of 09 Mtr. - Octagonal Poles with 90 (90 Watt IP 66) LED fitting, Cetralized Lighting load Energy

Of Saver System Panel & accessories Considering 25 Mtr. Distance between two poles @ Panoli Estate. (Single

Work Side Installation) Two-year maintenance guarantee period.

QTY. DESCRIPTION OF ITEM UNIT RATE/ Total Amount

QTY. DESCRIPTION OF ITEM UNIT RATE/ Total Amount

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

1 388 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and No. 15705.50

arrangement for cable termination to be erected on suitable

foundation (included). (iii) Add Extra for PU base primer and PU

Paint on pole.-(H) 9 Mtr. Long 70 mm Top X 155 mm bottom dia,

3 mm thickness with 260mmX260mmX16mm base plate, 4-M

Bolts and 750mm long J-Bolt.Approx Pole weight 97 kg

Providing M-150 / 1:2:4 cement concrete foundation & 70 % PCC

from bottom including excavation for the pole of size 60 x 60 x

cms. Deep in below ground level with plinth of 45 cms x 45 cms(or

45 cms dia x 45 cms) high upper ground level with necessary

2 388 curing and finishing in approved manner.( for 9 & 10). Construction No. 1652.36

of RCC Foundation for Octogonal pole suitable for 9 Mtr Hight

pole with J type bolts erection etc complete, foundation design

given by Agency and design by approved structure consultant, and

as per details specification and as per directed by engineer in

Providing & erecting ISI marked Double pole 6 A to 32 A switch

suitable to operate on 240 V, A. C. supply and having overload &

short circuit triping element and breaking capacity 10 kA

conforming to IS: 8828/ 1996 with mounting clamp with nuts, bolts

3 388 & washers suitable for erection on pole with cable clamps & earth No. 326.23

bolt.,for lighting Load (B Curve) in existing box (Cat-III) with

Backelite connector strip 4 way-2 nos/8 way -01 No (incoming &

out going cablewith stud type terminals suitable for 4C X 16 Sq mm

Cable on existing board - (1 No. Per St. Lght Pole)

P & F of Solderless Crimping Type Aluminium Lugs (4 Nos. per

termination) conforming to IS suitable for 1 x 4.0 Core x 16 Sq.

MM PVC Insulated Aluminium Armoured cablewith high pressure

tool &l complete erected with insulating materials for each

termination. - (2 Nos. Termination Per St. Light Pole & 16 nos.

termination per Energy Saver System )

SITC of funnel type pipe earthing having 150 cms Long and

cms dia. Medium Class Galvanised iron pipe with coupling and

buch burried in specially prepared earth pit with salt & charcoal

5 388 complete with necessary double 8 SWG hot deep galvanised iron No. 602.97

strip earth wire - 0.8 Kg (2 x 3.5 Mtr. = 7Mtr.) laid upto bolt fitted

in pole for earthing . (Earthing at each poles) as per drawing - (1 Job

Per St. Light Pole)

SITC of Decorative Single Arm Bracket consisting of Light Class

M. S. pipe of 4.2 cms outside dia.complete with suitable M.S.

sleeve tubing of approx. 45 cms length and suitable for 76.5 mm /80

mm, Galvemizing 85 microns Per kg brackets weight or require size

pole top having suficient fastners fior fixing the brackets and having

suitable rise as per site condition as directed and spread of 1 mtr.

6 388 with suitable welded stiffner reducer and lock nut complete Hot Dip No. 614.08

Galvanized suitable for side entry fitting brackets, as per site

condition and as per drawing / directed by Engineer Incharge. - (1

No. Per St. Light Pole)-Sleeve dia 88.9mm x 3.25mm 6.5 kg/mtr

mtr length,Arm dia 42mm x 3.2mm 3.1 kg/mtr, Single arm, 1 mtr

5.9 kg, 1.5 mtr 7.4kg, 2.0 mtr 9.0 kg, Galvemizing 85 microns,

Tube, labour- galvenizing-Fastners , caps approx per bracket,

Supplying and erecting LED street light fittings with High power

White LEDs wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or

embossed 90 to 300 V,Power Factor more than 0.95, THD < 10 %,

CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire

efficiency> 85 lumens/watt . LED driver efficiency > 85 %.

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/

BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings

required LM-79 & LM-80 certificates)-(1 No. of (90 Watt IP 66)

Luminaire equivalent to 150 W HPSV (100 Lumens/Watt) fitting

per streetlight pole, Surge-4K) (Cat- III) as per site condition and as

per drawing/ directed by Engineer Incharge. - (1 No. Per St. Light

Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kv grade ISI marked copper wires of following size to be

8 3878 erected as directed. (h) 2.50 Sq.mm 3 core round PVC sheathed (9 Rmt. 137.36

Mtr. per St. Light Fitting x 1 No. St. Light Fitting = 9 Mtr.)

Providing, laying, testing & commissioning of 1 x 4.0 Core x 16 Sq.

MM, XLPE (IS: 7098 (i) - 88), ISI Mark, Armoured,

Multistranded, Aluminium Conductor suitable for 1.1 kV grade to

9 11247 be laid 90 Cms under ground or to be laid on wall with necessary Rmt. 153.52

clamps or in existing cable trench/ pipe at road crossing or on floor

and making the ground as per original. - For Streetlight between two

poles & Service Connections.

Providing & laying of approved make 50 MM Nominal OD

Doubled Walled Corrugated Pipes (DWC) of polyethylene

(conforming to IS 14930 - II) with necessary connecting accessories

like coupler, Tee, L - Bow, etc. of same material at required depth

10 11247 (90 cms) including excavation for laying of cable below ground/ Rmt. 219.17

road surface for enclosing cable and back filling the same to make

ground as per original & as per instruction of Engineer Incharge -

for Streelight Cable of 1 x 4 core x 16 Sq. MM and Service cable of

1 x 4 core x 16 Sq. MM.

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

11 500 connecting accessories of same material at required depth in Rmt. 95.95

existing trench for laying of cable. below ground / road surface for

enclosing cable-(C))90 mm outer dia

SITC of Centralized Lighting Load Energy Saver System CCMS

having 15 kVA or suitable rating with a provision of CCMS

independent compartment for fixing of Three Phase Energy Meter

of concern power supply authority & 63 A MCB andsuitable for

direct switching of load upto 5 kVA per phase and having Magnetic

Amplifier Technology, -Ve Feed back, current controlled, Coil

12 8 Based, Rugged Contruction, Extra Switch gear Capacity, Micro No. 71508.00

Controller based, 7 time zones programming, Astronomical Timer

for Automatic on/off of lighting load depanding upon the weather

conditions, User friendly diagnosis, level setting as per process

need, Phase independent redundancy, CRCA Poweder coated

elegant panel, Computer interface software, THD (Harmonics)

introduced by LES System shall Nil, Lumen drop should not exceed

Providing & 1erecting

Four Polesaving

Inductive Load (C Curve) of 63 A (Cat - III) with ISI marked

having overload & short circuit triping element and breaking

capacity 10 kA conforming to IS: 8828/

Supplying & erecting FUNNEL type earthing having 60 cms x

60cms x0.315 cms 300600 mm x 600 mm x 3.15 mm thk. Copper

earth plate burried in specifically prepared earth pit 3 mtr. below

ground with 40 Kg. Charcoal and 40 Kg. salt with alternate layers of

charcoal & salt, 20 mm dia Medium Class G. I. Pipe with funnel

with a wire mesh for watering & bricks massanary block, C. I. cover

complete as per para 7.3 of IS : 3043 with necessary length of

double galvenised copper earth wire no. 6 SWG - bolted with lugs

Drilling theandroad

covered in 12 mm

& Gate dia. breaking

witout G. I. pipe -the

15 500 surface(Asphalt)for laying of cable for feeding power supply by Mtr 452.48

making up to 100 mm bore dia of hole at both end complete.

Painting the number and words for inventory Identification on

erected fittings / equipment’s or Such accessories as may required

with good quality of enamelled paint as directed by engineer in

Dismentaling the existing underground cable without damaging it

17 3500 with glands, cable and box including refelling the trench up to Mtr. 10.10

ground level and making coils complete to be placed at different

Dismentaling the existing pole above 6 mtr. Height with brackets,

clamps, insulator, stay from the cemenet concrete foundation and

making the site clear by reflling the pits with excavated materials

and bringing it to the ground level.

Transpotation of dismentaling pole and bracket by trolly & tractor

19 388 per/pole 50.50

at filter plant.

Supplying & erecting power contactor for time switch complete

erected as per direction Cat III [D] 4 pole 440V 40 Amp.

Making trench in Hard Murrum / Tar Road of suitable width of

cm or required depth for laying any size of cable or locating the

fault all over the run and back filling the same and making the

surface as normal ground. Up to 25 mm2 Cable

- Total Amount (Rs.)

- Total Amount (Rs.)