Extension of 11 KV dedicated feeder from Khayerpur 33 11 KV Sub-Station to Subham Solitaire at Kashipur under khayerpur ESD

Amount

SCHEDULE - A

Carriage of . of 7.5mtrs /8.0mtrs/ 9.0mtrs length of Steel Tubular Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required a) Upto the lead range 25 KM i) For maximum 8 (eight) poles From MMD Store to Sub Division Store

Carriage of materials such as Cable,AAC, AAAC, ACSR,G.I,Wire,Cross-Arm,Stay Set,lnsulators etc., by Mechanical Transport from the Electrical Sub- Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required, upto the lead of 25KM & 50KM.a) Upto the lead range 25KM FromMMD Store to Sub Division Store

Carriage of G.O.S, D.O.F, L.A etc by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-à-vis including loading, unloading and Stacking as required up to the lead range of 0-25 KM

Erection of 9.0mtrs length of Steel Tubular POLE at any kind of soil , including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Erection of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp,Nuts & Bolts etc. as required. and making complete in all respect

Erection of M.S.Angle Cross-Arm,1.0 to 2.5 Mtr.Long 65 x65 x 6 mm ( Excluding the cost of BackClamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm,0.3 to 1.2 Mtr.Long75 x40 x 40 x 6 mm ( Excluding the cost ofBack Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm,1.3 to 2.8 Mtr.Long75 x40 x 40 x 6 mm ( Excluding the cost ofBack Clamp, Nuts & Bolts)

Erection of 11KV Pin insulator along with Pin.

Erection of 11KV Single Disc insulator set along with necessary fittings

Laying & Stringing of 1KM (Single Conductor) ACSR 6/7/4.72/1.57 mm dia DOG including hoisting & KM binding etc. Complete as required.

Erection of protective Guarding /Cross lacing for 415/240VoIt line BY GI wire 98/10SWG as per technical specification,across road/River/Telecom line etc. in horizontal/Verticle formation complete with Spool/Reel insulator.

Erection of 11KV DOF unit set of Two nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp,Nuts & Bolts)

Erection of 11KV 200 Amp. GOS unit set of three nos. including necessary connection complete as per technical specification. (Excluding the cost of back cIamp,Nuts & Bolts)

Supply of 125 mm dia. G.I. pipe (medium class)

Supply of 2.5mtr. Long , 40mm dia G.I.Pipe Make: TATA/ JINDAL)

Supply of 60Kg Salt & 55Kg Charcoal ( For 1 Pit).

Laying of 8 SWG GI wire at 300mm below the ground level for earthing of Sub-Station equipments from the earth electrode

Supply of Earthing with G.I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing (excluding supply of G.I.Pipe, Salt & Charcoal, Gi wire, nuts &boIts, etc. as required)

Febrication of Cross-Arms by MS Channel/MS Angle as per specification

Supply of stay clamp(50*6)

Supply of febricated clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primercoating

Grouting of Steel Tubular PCC Pole of ratio 1:2:4 (1cement:2 riversand:4 Jhama brick Aggregate of 20mm. Nominal size) including supply of cement, sand and brick aggregate Complete with excavation, refilling of each, ramming along with centering and shuttering as required

Supply of XLPE CABLE ( HT) 3C X 240 Sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Trench Size: Width-350mm, Hieght- 1200mm /Sand (couhioning): Hieght-250mm, Width- 350mm/ Protection: Double layer Bricks Above 120 sq. mm upto 400sqmm (240 Sq.mm )

Laying of one number PVC insulated and PVCsheathed / XLPE power cable of 11 KV grade offollowing size in the existing masonry open duct asrequiredAbove 120sqmm Up to 400 sq. mm ( 240 Sq.mm )

Laying ofdifferentsizes DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required

Supplying and Making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as requiredAbove 150 upto 300 sqmm ( 240 Sq. mm )

Manually digging /driIIing horizontally or diagonali direction for road crossing / Water supply line/Telcomunication line/Gas Pipe line etc. including Laying of 64 to 200mm dia GI pipe direct into the earth at a depth of minimum 1100mm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and direction of Engineering In Charge.

Coiling of excess Single/3core/3 /z Core, upto to 400sqmm, HV/MV, XLPE insulated, armoured power Cable direct into earth including excavation of earth upto a depth of 1500mm (Size pit should be 2250mmX2250mm or as per site requirement.) including 1st class bricx protection of two layer f(at brick soling 300 mm. Fine sand (Local quary) for cushioning/bed and refilling and ramming the excavated soil as per direction of Engineer in charge.

Laying of one number PVC insulated and PVCsheathed / XLPE power cable of 11 KV grade of all size in the GI Pipe/HDPE for riser including tieup ofPipe with pole by the help MS Flat Clamp (excludingcost of Clamp and Nut & Bolts) as required up to 400 sq. mm

Supplying and Making Indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as requiredAbove 150 upto 300sqmm

Supply of Providing of Pre-cast cement concretecableidentification route marker (1 cement: 2 coarse sand4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits as per design, drawing and specification of TSECL. The marker snail be embossed "DANGERS: TSECL, ELECTRIC POWER CABLE” with Black colour letter {both side) The visible part shall be painted with Yellow colour japan paint. (1 cement: 2 coarse sand 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits.

RANJAN BHATTACHARJEE (BID ID -188583)

KAJAL DAS (BID ID -189164)

Asish Debnath (BID ID -189083)