Supply and Installation of equipments for Aircraft Structure Lab

Shear Center location for open section - Angle Shape – ‘L’ Length in cm – 50 Breadth in mm – 50 Height in mm – 50 Thickness in mm – 2 Material – M.S Dial Gauge – 2 Nos. Weight – 1Kg-0.2-6 Hook – 2 Nos.

Shear Center location for open section - Channel Shape – ‘[’ Length in mm – 500 Breadth in mm – 50 Height in mm – 100 Thickness in mm – 2 Material – M.S Dial Gauge (Analog) – 2 Nos. Weight – 0.2-6 Hook – 2 Nos.

Shear Center location for closed section (D-Section) Shape – ‘D’ Length in cm – 50 Breadth in mm – 75 Height in mm – 37.5/37.5R Thickness in mm – 0.8 Material – Aluminum Weight – 0.2-5 Hook – 2 Nos.

Bean with combined loading Length in cm – 50 Breadth in mm – 50 Thickness in mm – 2 Material – MS Weight – 0.5 - 4kg Hook – 1 Nos. Strain indicator –1 No. Digital indicator – 1 No.

Wagner Bean – Tension Field Bean Length in cm – 40 Breadth in mm – 250 Thickness in mm – 0.8 Material – Aluminum Hydraulic jack – 1 No. Strain indicator – 1 No. Load indicator – 1 No.

Column Test Rig Base frame box with 2 Nos., pillar of 20mm diameter with horizontal fixings. Digital meter for load and deflection of 4 digital mounted on the panel. Fixed/Fixed, Hinged, condition and fixtures are provided with strut of 6mm and 4mm of SS. Deflection by digital meter, loading by Mechanical method and intern secured by load cell of 100 Kg.

Bean test setup to find Young’s Modulus, Maxwell’s Reciprocal theorem, Verification of principal of superposition, Verification of Castingliano’s load theorem with different end conditions: a) Young’s Modulus Mild steel beam: Length between point to point of selection is 1000 mm, width 25mm and thickness of 6mm., Dial gauge – 1 No., Weights - 500gm x 2 Nos. b) Maxwell’s Reciprocal theorem Mild steel beam: Length between point to point of selection is 1000mm, width of 25mm and thickness of 6mm., Dial gauge – 1 No., Weights - 200gm x 3 Nos. c) Verification of Super position theorem Mild steel beam: Length between point to point of selection is 1000mm, width of 25mm and thickness of 6mm., Dial gauge – 1 No., Weights - 200gm x 3 Nos. d) Verification of Castingliano theorem Mild steel beam: Length between point to point of selection is 1000mm, width of 25mm and thickness of 6mm., Dial gauge – 1 No., Weights - 500gm x 2 Nos.