Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.1 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹21.1 L+₹2.0 L (10.7%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹21.5 L+₹2.4 L (12.7%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹21.5 L+₹2.5 L (13.1%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder |
Tender Value
₹26.7 L
EMD Value
₹53,400
Closing Date
26 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Banar
Garrison Engineer Banar, Jodhpur-342027
SPL REPAIR TO BLDG NO P-26 (04 DUS) JCOs MD ACCN AT AA BANAR, JODHPUR
2022_MES_554899_1
8822/38/E8
Open Tender
Civil Works
Item Rate
180 days
Banar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer Banar
₹53,400
Yes
21 Nov 2022
28 Sept 2022
28 Oct 2022
28 Sept 2022
26 Oct 2022
12 Oct 2022
Amount
Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) and removing from site complete all as specified.
Material and labour for 25mm thick PCC (1:2:4) type B-0, using 12.50mm graded stone aggregate as in base concrete to floor finish complete all as specified.
Material and labour for light shade Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified.
All as per item No 3.00 but as in skirting over and incl 10mm thick rendering in CM 1:4 complete all as specified.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified.
Material and labour for coloured glazed ceramic tiles 7 to 8mm thick (Square/rectangular), coloured tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified.
Material and labour for coloured Glazed ceramic tiles in vertical surface 350x250mm/450x300mm, 7-8mm thick (glossy finish) on walls/vertical surfaces over and including 10mm thick rendering in CM 1:3 complete all as specified.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc upto the height 7 Mtr complete all as specified.
Material and labour for rendering 15mm thick in CM 1:6 mixed with WPC on other than fair face of stone masonry or concrete surfaces finsihed even and smooth without using extra cement complete all as specified. Note : WPC shall be measured and paid separately
M&L for Preparation of newly plastered surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc and applying two coat of distemper oil emulsion over one coat priming plastered and other surfaces with alkali resistant priming paint (white or tint as directed) on walls with brush leaving permises clean etc complete all as specified.
Material and labour for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified.
M&L for complete removal of existing treatment and Preparation of old plastered surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc and applying two coat of distemper oil emulsion (white or tint as directed) over a coat of priming plastered and other surfaces with alkali resistant priming paint on walls with brush leaving permises clean etc complete all as specified.
M&L for providing and applying white putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete all as specified.
Material and labour for preparation of old plastered or unplastered surfaces of walls and applying one coats of white wash complete all as specified.
Materail and labour for 10mm thick rendering in CM 1:3 on concrete surface as in ceiling and finishing the surface even and smooth without using extra cement complete all as specified.
M&L for Preparation of newly plastered surfaces of ceiling (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc and applying two coat of distemper oil emulsion over one coat of priming plastered and other surfaces with alkali resistant priming paint (white or tint as directed) on ceiling with brush leaving permises clean etc complete all as specified.
Material and labour for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified.
M&L for complete removal of existing treatment and Preparation of old plastered surfaces of ceiling (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc and applying two coat of distemper oil emulsion over one coat priming plastered and other surfaces with alkali resistant priming paint (white or tint as directed) on ceiling with brush leaving permises clean etc complete all as specified.
Material and labour for preparation of old plastered or unplastered surfaces of ceilings and applying one coats of white wash complete all as specified.
Material and labour for 15mm thick rendering in two layer, 5mm thick rendering in CM 1:4 mixed with WPC over 10mm thick rendering in CM 1:4 on stone masonry/concrete surfaces/roof projections/chajjas upto the height 7 Mtr complete all as specified. Note:- WPC shall be measured and paid separately.
Material and labour for 15mm thick rendering in CM 1:4 mixed with WPC on stone masonry/concrete surfaces and Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends etc complete upto the height 7 Mtr all as specified. Note:- WPC shall be measured and paid separately.
Material and labour for 15mm thick rendering in CM 1:4 mixed with WPC on stone masonry/concrete surfaces and Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work n exc 15 cm in width or girth; including cutting to edges, all mitres and stopped ends etc upto the height 7 Mtr complete all as specified and directed by Engineer-in-Charge. Note:- WPC shall be measured and paid separately.
Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge.
Raking out joints/pointing to squarred rubble masonry, coursed or uncoursed built in cement mortar complete all as specified.
M&L for keyed pointing to stone masonry surface in CM 1:4 complete all as specified.
Material and labour for two coats of cement base paint over one coat of alkali resistance primer on newly plastered surfaces of walls including necessary preparation of surfaces complete all as specified.
M&L for two coats of cement base paint on old plastered/pointed surfaces of walls including necessary preparation of surfaces all as specified.
Removing of existing filling in sunken floor of WC and repair to sunken floor comprising with 15mm thick plastering in CM 1:3 of internal surface mixed with WPC, painting with bitumen 30/40 over a coat of bitumen primer, putting 50 micron polythene filling with PCC 1:5:10 type E-2 using 40mm graded stone aggregate and inserting 50mm bore 1.00M long GI water tubing upto the wall complete all as specified. Note : (i) WC and tiles shall be measured and paid separately. (ii) Bottem surface of sunken portion shall be measured only for payment.
Supply and fixing in repair 75mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate complete all as specified.
Supply and fixing in repair 75mm dia cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.
Dismantling of 75mm/100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from trenches/wall, if required complete all as specified.
Supply and fixing 100mm bore cast iron soil, waste and vent pipes, sand cast in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified.
Supply and fixing 75mm bore cast iron soil, waste and vent pipes, sand cast in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified.
S&F in repairs 100mm dia CI bends (any radious) diminishing pieces or tapers (larger bore shall be measured) with oval access door all as specified.
Supply and fixing in repairs vitreous china squatting pan, Órrisa Patern' size 580mmx440mm white with integral foot rests, embedded and set in PCC 1:5:10 type E2 (using 40mm stone aggregate) and making good to dismantled floor including removing rubbish complete all as specified.
Supply and fixing in repair 10 ltr PVC valve less, symphonic action type dual type flushing, low level, white, with inlet ball valve, float and handle including 600mm long PVC connection and brackets complete all as specified.
Supply and fixing in repair Stainless steel kitchen plate rack 1.0mm thick of size 750 x 600 x 250mm complete all as specified.
Taking up or down 15mm bore steel tubing complete all as specified.
Supply and fixing 15mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls, ceiling or laid in floors complete all as specified.
S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets & 32mm waste coupling complete all as specifed.
S&F PVC connections 15mm size with PTMT nuts of length 600mm all as specified.
Supply and fixing in repair 15mm stop valves, screwed down high pressure, screwed both ends for iron pipe or for unions and fixed for 15mm bore but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified.
S&F in repair CP 15mm dia bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.
S&F in repair 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot'or Çold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed but fancy type complete all as specified.
S&F in repair 15mm dia stop cock, cast copper alloy, screwed down, high pressre but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified.
Supply and fixing in repair 100mm dia brass chromium plated shower rose complete all as specified.
Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified.
Taking down chowkats or frames with shutters (W/o taking off shutters) n exc 1.5 sqm each and cutting holes of apriate size for hold fast complete all as specified and directed.
M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & complete all as specified.
M&L Factory made solid panel of PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
M&L for 100mm long, medium weight, Stainless steel butt hinges fixed with doors complete all as specified and directed
S&F 150mm long Aluminum tower bolts of extruded section all as specified.
S&F 150 mm size Extruded aluminium alloy handles, fabricated type, anodised handles all as specified.
S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified.
M&L 18/20mm thick any shade marble (Green marble) slab in cooking platform fixed CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade over and including 15 mm thick screed bed in CM 1:6 completed all as specified
M&L 50 mm thick PCC (1:3:6) type C2 (by using 40mm aggregate) in plinth protection complete all as specified.
M & L Stone slab 35 mm to 45 mm thick dressed true and square in one length not less than 60 cm and n exc 120 cm in copings, window cills, chajjas, sunshades, plinth protections etc, punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directd, set, jointed and pointed in cement mortar over and including 15mm thick screed bed in CM 1:4 complete all as specified
Demolition of RCC roofs, floors (other than ground floors), beams, staircase, landing, chajjas, balconies, roof projection and similar suspended work complete all as specified.
M & L for RCC (Nominal Mix) Type B1, 1:2:4 (20 mm graded stone aggregate) in Chhajja, balconies, roof projection and similar suspended work complete all as specified.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent shape required, including welding to existing reinforcement cranking bending, hooking etc and binding with MS wire (annealed) not less than 0.9mm dia all as specified.
M & L for formwork to chullah, chajja, balconies, roof projection, troughs and similar suspended items including edges for rough finished flat surfaces of concrete complete all as specified.
S&F in repair 20mm dia curtain rails, chromium plated with fixing brackets, stops, rollers (two nos of brackets/knobs/corners for one length/each opening) etc complete all as specified.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with 32mm waste fittings, brass, chromium plated for basins with ling screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.
Taking down chowkats or frames with shutters (W/o taking off shutters) exc 1.5 sqm but n exc 4sqm each including cutting holes of appriate size for hold fast all as specified.
Supply and fixing 01 mm thick mild steel shutters with and including 1.00 mm thick frame for cupboard of size suitable required to cover the shelf including handle, mortise type locking arrangement (two set key) hinges and frame including powder coated painting and taking down from existing place including making good the existing surface complete all as specified.
Supply and fixing rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors frame(Chowkhats) of angle or other sections with gusset plates, rails, braces etc complete, drilled for covering. Doors, etc to be prepared for hanging or sliding with and either hooks or hinges or steel hanging door fittings complete all as specified.
Material and labour for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in hold fast iron fixing including necessary form work complete all as specified.
Supply and fixing of MS butt hinges 100 mm size medium weight, cold rolled mild steel complete all as specified.
S&F 100mm size single action door spring hinges mild steel with steel wire spring stove enamelled black complete all as specified.
S&F 30 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats all as specified.
S&F stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples or wooden beads supplied with shutters all as specified.
Supply and fixing 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 09 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part - I), kiln seasoned and chemically pressure treated complete all as specified.
S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified.
S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified.
S&F Aluminium floor door stopper overall length of coverplate 140mm with suitable stops (Double) fixed in wooden door to stop all as specified.
M&L two coats of synthetic enamel paint over a coat of pink primer including prepration of newly wooden surfaces of girth exc 10cm all as specified.
M&L one coats of synthetic enamel paint including prepration of old wooden surfaces of girth exc 10cm all as specified.
Taking down chowkats or frames with shutters (W/o taking off shutters) n exc 1.5 sqm each all as specified.
S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded all as specified.
S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars all as specified.
S&F factory made steel ventilator with top hung shutter inlcuding hinges, steel peg stay with or without glazing bars complete all as specified
S&F mild steel of grade Fe-290 (Grade E-165) in framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works all as specified.
M&L two coats of synthetic enamel paint over a red oxide primer including prepration of newly treated steel surfaces of girth exc 10cm all as specified.
M&L for preparation new steel surface any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint two coat synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified.
M&L one coat of synthetic enamel paint including prepration of old treated steel surfaces of girth exc 10cm all as specified.
S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc. 0.5 sqm in each pane all as specified.
Supply and fixing 500 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm brass ball valve high pressure including dismantling of the old unserviceable water tank with all accessories complete all as specified.
Material and labour for running welding in repairs, thickness of metal to be welded not exc 6 mm thick complete all as specified.
Hacking out old broken glass (any thickness size quality or description from metal frame including punching or drilling our old glazing/springs clips all as specified.
All as per item No 88 but Figured glass, pin head type all as specified.
Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified.
Refixing 20mm dia old steel tubing and connections in new or old position (walls, ceiling, floors etc) complete all as specified.
Supply and fixing 20mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls, ceiling or laid in floors complete all as specified.
M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified.
M&L for pre-cast concrete block as in Kerb Stone (Machine made) with solid blocks Type B1, 1:2:4 (20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:4 complete all as specified.
M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and colour pigment complete all as specified.
Taking down copper /alunimium point wiring (light,Fan, Socket, power etc) complete including fixture and fittings such as switches, ceiling roses, pendants,regulator, socket, light fitting of any wattage etc including making good disturbed surfaces of walls, floor etc complete all as specified.
Taking down old unserviceable/worn out sub main wiring/service wire of any type and size complete all as specified.
Taking down Main switches/DBs of any make and type including teakwood board, MCBs etc complete and making good the disturbed surfaces to match with existing including colour wash complete all as specified.
Taking down ceiling fan/ exhaust fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan and Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified.
M & L servicing of geyser of 1.5/2 KW capacity, cleaning, overhauling, spray painting with one coat of synthetic enamel paint including writing MES no and refixing the geyser all as specified.
M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, in PVC rigid conduits heavy duty ISI marked totally concealed in wall/floor/roof including all accessories etc. with Modular sunken boxes including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified for the following:-Note- (i) Cutting in chases and pointing in will be done by contractor without any cost. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost.
One light point controlled by one, One-way switch complete all as specified
One fan point controlled by one, One-way switch complete all as specified
One 5 pin 5Amp Socket outlet point on same board with other switches including earth wire complete all as specified.
One 5 pin 5Amp Socket outlet point on independent board complete all as specified.
One bell/buzer point controlled by one bell push complete all as specified.
All as per item No 105.00 but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board. Note:- Making good of disturbed surfaces will be done by contractor without any claims.
All as per item No 106.00 but with 4 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 4 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board. Note:- Making good of disturbed surfaces will be done by contractor without any claims.
Supply and fixing ceiling rose surface backelite 65x50mm three terminals all as specified and directed.
Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.
S & F 240 V, Single pole and neutral enclosure with a two pin and earth plug and socket complete with one 10 Amp single pole MCB complete all as specified.
S & F modular switch 6A SP one - way 230V white ivory finish complete all as specified.
S & F modular switch 16A SP one - way 230V white ivory finish complete all as specified.
S & F modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.
S & F modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.
S&F bell electrical ding dong including hard PVC board complete all as specified.
S & F Modular Bell push 6A 1 module complete all as specified.
S & F Modular type stepped electronic fan regulator all as specified.
Supply and fixing in repair of the following accessories :-
White cover plate with frame, 2 module complete all as specified.
White cover plate with frame, 3 module complete all as specified.
White cover plate with frame, 4 module complete all as specified.
White cover plate with frame, 6 module complete all as specified.
White cover plate with frame, 8 module complete all as specified.
M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC conduit totaly concealed in wall/roof incl accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 4 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.)
S&F MCB TPN DB 4 way double door with 200 amps rated busbar 415 V complete all as specified.
S&F MCB SPN DB 8 way, double door, with 200 amp rated busbar 240 V complete all as specified.
S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified.
S & F for MCB double pole of rated capacity 32 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified.
S & F for MCB four pole of rated capacity 40/63 amps, 415 volts breaking capacity 10 KA, C-curve complete all as specified.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.
Material and labour for PVC connection 15mm dia of 450 length with brass nuts for cold side complete all as directed by Engineer-in-charge.
Material and labour for PVC connection 15mm dia of 600 length with brass nuts for hot side complete all as directed by Engineer-in-charge.
S & F LED based security light 35 W in aluminium pressure die cast housing with touched glass cover having IP 66 Protection and with aluminium bracket including taking down of old unservicable security light complete all as directed by Engineer-in-charge.
Supply & Fix LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified.
Bhawani Enterprises
NISHA CONSTRUCTIONS
M/S SUMAN ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .