CA NO. CWE BLY / GE(E)/ 44 OF 2021-2022 PROVN OF 11 KV UG POWER SUPPLY FROM PUMP HOUSE NO 1 TO PUMP HOUSEE NO 2 AT RTS AND DEPOT HEMPUR UNDER GE(E) BAREILLY

Amount

Supply, lay, connect, test & commissioning XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 V grade, earthed, laid in trenches/ ducts/ encased in GI pipe/fixed to pole including jointing and testing, of size 120 Sqmm, 3 Core complete all as specified and as directed.

S&F in repairs cable end termination 11 KV HT (heat shrinkable) cable jointing kit for 11 KV ( Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of size 120 to 185 Sq mm complete all as specified and as directed.

S&F in repairs straight through 11 KV HT (heat shrinkable) cable jointing kit for 11 KV ( Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 to 185 Sq mm complete all as specified and as directed.

Supply,install,test & commissioning outdoor type feeder pillar box suitable for 11 KV,made out of 3.15mm MS sheet, powder coated,dust and vermin proof with rain water protection,double door type with locking arrangements of size 1.2 m x1.2 m x 0.6 m (Min) with provision of HT 11 KV post insulators, three Nos fixed inside with suitable size of copper bus bars for cable connections and danger notice plate, panel to be fixed at 45 cm above ground level on brick masonry plateform including 75 mm thick PCC (1:3:6),type C1 (Using 20mm graded stone aggregates) around the area upto 1.5 Mtr in all directions from the panel, cable joints inside the panel provided with suitable insulators and copper bus bars all as directed including provision of fencing as per existing pattern with openable gate (approx area 20 Sq mtr) complete all as specified and directed. Note :- Feeder Pillar box shall be manufactured by any manufacturer approved by CPRI.

S&F danger notice plate of 1.6 mm thick mild steel sheet vitreous enamelled white of size 20 x25 cm with figures letters and conventional skull bones in signal red colour and fixed with mild steel clamps made of flat iron nuts bolts and washers etc for HT poles with voltage and danger indicated in hindi and english and local vernacular complete all as specified and as directed.

M & L for Cutting of road/hard standing to a size of 30cm in width and not exceeding 90cm in depth for laying of protection pipe/water line/cable including returning filling including spreading, levelling watering and well ramming in layers and making good by providing PCC 1:2:4 mix, type B-1 (using 20mm graded stone aggregates) for the top 100mm layer complete all as specified and directed.

S&F galvanized iron pipe of 80 mm bore, Light grade with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole or laid in floor complete all as specified and directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in any type of soil for laying of under ground cable and foundation of poles complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soil complete all as specified and as directed.

Removing of excavated soil not exc 50 m and depositing where as directed at a level n.exc 1.5 m above from starting point. complete all as specified and as directed.

M&L for dry river sand cushioning for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top ebdge of cable after laying and punning up to 18 cm depth complete all as specified and directed. Note ;- For payment purpose the punned down thickness of 18 cm only shall be considered.

Supply and lay un-reinforced factory made, Precast concrete cable covers, class HV, type 1 of size 300mm x 180mm x 40mm complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanized iron earth strip 32X6mm by means of bolts nuts check-nuts and washers of galvanized iron or steel as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point and testing on completion with including 40mm bore, light grade, GI protection pipe, RCC 1:2:4, type B1, 20mm thick cover reinforced with 8mm dia. dia TMT bars 3 Nos both ways with lifting hook made out of 10mm dia TMT bar, watering arrangement with funnel and wire mesh and 20mm bore light grade GI watering pipe, earthing lead from earth plate to eqipment to point (up to 7.5M long) common salt and charcoal filling, necessary excavation and earth work in any type of strata & testing on completion complete all as specified and directed.

RAZA ENTERPRISES

sunder and company